Home | Ezine | Forums | Links | Contact
NitroExpress.com: Classic Custom Mausers by 1950-60's Anthony Guymon

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
buckstix
.400 member


Reged: 07/11/12
Posts: 1243
Loc: Whitetail Country
Classic Custom Mausers by 1950-60's Anthony Guymon
      #337478 - 05/02/20 11:22 PM

Hello All,

I acquired this rifle in 2014. ... Its a Custom Rifle from a maker that I had not heard of until I purchased this rifle. I learned that Apparently Anthony Guymon was in business from approx. 1948 - 1963.

As you can see, Custom Rifles back then, were very fancy so everyone could instantly recognize that it was a "Custom" rifle.

When I searched this forum, I didn't find any references to Anthony Guymon so I'd be interested to know if anyone has any custom rifles from this maker.

I bought this rifle at a local Gun Show from the original owner who was 78 years. He had the rifle built for him in 1960 while he was stationed in Seattle, Washington, serving in the Navy as part of a Submarine crew. He was originally from Clintonville, Wisconsin. After his tour he returned to Wisconsin and hunted with the rifle every year for the next 53 years, up until the year 2013 and sold the rifle to me the following year. He told me that he never took the rifle into the field on days when it rained. That explains its MINT condition. He sold me the rifle with the original Guymon Leather sling, the original Guymon Gun Case w/ Hand Tooled Leather Trim, and the original 29 page Anthony Guymon catalog from his 1960 order. Inside the catalog he wrote the prices for all the options he wanted - the total price he paid in 1960 was $335.90. That was a lot of money in 1960 and the 1960 - 2020 dollar equivalent calculator says its $2916.13 in today's dollars.

As always, your comments are welcome.

Here are the particulars:

1960 Anthony Guymon Custom Rifle, Bremerton, Washington
"Custom Streamliner Featherweight" model w/ blind mag - 4-shot (3+1)
280 Remington Caliber
22" Douglas Barrel - 1:11 twist
FN Mauser Action
Buehler safety
Dayton Traiser Trigger
"Kings Quality" Fiddleback Maple Stock
Ebony Grip Cap & Forend Tip
Pachmayr Butt Plate w/ Lightning-Bolt Spacer
Redfield 1-3/4-5x Scope
Guymon Leather sling
13-3/8" LOP - 8 1/4 lbs w/ scope & sling







2014 picture of the 79 year old original owner with his Custom Built Rifle, the day he sold it to me.



And here's another Anthony Guymon Custom rifle.

You may have seen my posts in the Classifieds looking to buy a "Brevex Mauser". I've been collecting Brevex rifles for quite some time and have 8 in my collection.

http://forums.nitroexpress.com/showflat.php?Cat=0&Number=334222&an=0&page=0#Post334222

Mark, one of my friends here in Wisconsin, knew that I collected Brevex Mausers rifles. The weekend before last he put me onto this one. Mark is a big time Weatherby collector, and found this rifle while searching for vintage Weatherbys. It was in an obscure Ohio Auction that was not listed with proxibid. Although Mark knew nothing of the rifle's maker, and no reference was made in the Auction description, I immediately recognized the distinctive stock profile as that of an Anthony Guymon Custom creation. With only a day to go, I quickly jumped in and bid. It went ridiculously reasonable.

This is another Custom Anthony Guymon rifle from the 1950's. As you can see, the Guymon Catalog listed Brevex actions as one of their special offerings, and this is one of them. It has a heavy-duty Laminated stock and a period Weatherby Factory barrel in 257 Weatherby Magnum caliber. It came with a Unertl 2" scope, a hand-tooled leather sling, and a custom Bi-Pod and Tail-Drag, both of which are bolt-on and adjustable as you can see them in place in the last photos of the rifle.

In looking over this custom build, I realized that a 257 Weatherby Magnum is not the caliber of choice for typical benchrest shooting which is conducted at ranges of 100, 200, and 300 yards. Therefore, this rifle must have been built especially for long-range 1000 yard benchrest matches.

Its always fun to discover a classic builder from the "Golden Age" of Custom Mausers.

Here are the particulars:

1950's Custom Rifle by Anthony Guymon, Bremerton, Washington
"Custom Streamliner Magnum Varmint" model
26-3/8" Weatherby Factory Barrel
257 Weatherby Magnum Caliber
Brevex Mauser M-300 Action
Buehler Low profile Safety
Dayton Traister Adjustable Trigger
Laminated Magnum Stock w/ cross-bolt
Rosewood Grip Cap & Forend Tip
Morgan Adjustable Butt Pad
Unertl 2" 36x Scope
Sling Swivels
13-1/2" LOP - 11 lbs 1 oz - 13 lbs 12 oz w/ scope























--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1650
Loc: Finland
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: buckstix]
      #337491 - 06/02/20 05:14 AM

There is no doubt these rifles has been built in USA

--------------------
http://promaakari.wordpress.com/


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4205
Loc: Nth QLD Australia
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: Igorrock]
      #337498 - 06/02/20 07:20 AM

Certainly some fancy wood there Buckstix!
Lovely to hear you got it off a old hunter, he sure looked after his rifle - certainly has gone to a good home now!
I always though the Brevex was a Magnum action only.....obviously not.
Super woodchuck slayer there mate, you'd give Ripp a fright at LONG range with that rig


Post Extras: Print Post   Remind Me!   Notify Moderator  
JDL
.333 member


Reged: 25/12/10
Posts: 252
Loc: Louisiana
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: 93x64mm]
      #337539 - 07/02/20 01:50 AM

Beautiful grain on the .280 but, a bit too racy for my blue collar taste. However if the price was right......;-).

Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1243
Loc: Whitetail Country
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: JDL]
      #337573 - 07/02/20 09:37 AM

Quote:

There is no doubt these rifles has been built in USA



Hello Igorrock,
Thanks for the reply.

Yes, they have the "flashy" style of the 1950's


Quote:

Certainly some fancy wood there Buckstix!
Lovely to hear you got it off a old hunter, he sure looked after his rifle - certainly has gone to a good home now!
I always though the Brevex was a Magnum action only.....obviously not.
Super woodchuck slayer there mate, you'd give Ripp a fright at LONG range with that rig



Hello 93x64mm,
Thanks for the reply.

Yes, I too was surprised to see a Brevex action on a case as small as the 257 Weatherby Mag. A standard long action would have worked just fine.

Quote:

Beautiful grain on the .280 but, a bit too racy for my blue collar taste. However if the price was right......;-).



Hello JDL,
Thanks for the reply.

Well, yes! The price was very reasonable for both.

By the way .... I have a Brevex Mauser in 475 A&M Magnum with the former owner's initials JDL engraved on it. Any relationship to you?



--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
JDL
.333 member


Reged: 25/12/10
Posts: 252
Loc: Louisiana
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: buckstix]
      #337637 - 08/02/20 01:34 AM

Hello buckstix, No it isn't my initials on your fine rifle although I think it would make an outstanding cast bullet shooter. :-)

Post Extras: Print Post   Remind Me!   Notify Moderator  
pjaln
.375 member


Reged: 08/06/06
Posts: 711
Loc: massachusetts ,U.S.A.
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: JDL]
      #338457 - 27/02/20 02:53 PM

my eyes are hurting now...paul

Post Extras: Print Post   Remind Me!   Notify Moderator  
buckstix
.400 member


Reged: 07/11/12
Posts: 1243
Loc: Whitetail Country
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: pjaln]
      #338905 - 10/03/20 06:56 AM

Quote:

Hello buckstix, No it isn't my initials on your fine rifle although I think it would make an outstanding cast bullet shooter. :-)



Hello JDL,
Thanks for the reply.

Quote:

my eyes are hurting now...paul



Hello pjaln,
Thanks for the reply.

Mine too!

--------------------
"You never pay too much for something, you only buy it too early."


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1653
Loc: Australia
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: buckstix]
      #338921 - 10/03/20 06:43 PM

Certainly different. What’s the timber on the first one, Buckstix?

--------------------
.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: Ash]
      #338929 - 10/03/20 11:58 PM

Its interesting to open a thread with the last comment and read upwards with such rifles as these.

Voila! And there they are.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Vladymere
.300 member


Reged: 11/08/15
Posts: 187
Loc: North Carolina, USA
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: NitroX]
      #338937 - 11/03/20 05:17 AM

What is a Brevex action? Is that a manufacturers brand?

Vlad


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1653
Loc: Australia
Re: Classic Custom Mausers by 1950-60's Anthony Guymon [Re: NitroX]
      #338962 - 11/03/20 11:52 PM

Quote:

Its interesting to open a thread with the last comment and read upwards with such rifles as these.

Voila! And there they are.




If you’re referring to me - I now see Fiddleback Maple.

Was gunna be my guess

--------------------
.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 24 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 5820

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved