Home | Ezine | Forums | Links | Contact
NitroExpress.com: loaded 4 test rounds for my 16 ga pinfire.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
casper50
.400 member


Reged: 18/10/07
Posts: 1445
Loc: Alaska
loaded 4 test rounds for my 16 ga pinfire.
      #330897 - 07/08/19 04:57 AM

Loaded 4 test rounds for my 16 bore pinfire. Wanted to make sure that the process ends in rounds that go boom. All worked so I'll load more in a few days. These were with magtech brass. Going to try the same process on some all plastic hulls that I was given by some members.


https://www.youtube.com/watch?v=QXUgmYmxiVg

Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9034
Loc: There's a lighthouse in the mi...
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: casper50]
      #330898 - 07/08/19 05:21 AM

congratulation, waiting for details how you adapt the magtech brass

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1445
Loc: Alaska
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: lancaster]
      #330899 - 07/08/19 05:31 AM

My friend with the lathe convinced me that turning 25 inconsistent magtech brass would be a lot more work than making the chamber rims fit the cartridge. So no lathe work on the brass. I tried to use the cases as they were, leaving the primer pocket on the inside but I could not get consistent ignition because of the hard angle. So I drilled the primer pocket from the inside of the case until it was flush with the base. I then epoxied a thin 5/8" brass disc inside the case all the way at the bottom. Next step is to take a 1/4" over powder card and punch 1 hole in the middle and then bite out just a bit of one side to make it slightly oblong 7/32". Primer fits inside this hole in the wad. Push the wad all the way to the base and then drill the hole for the brass firing rod through the case and the paper wad. Position a cap into the paper wad hole and push in the firing rod. Then just load as normal. Since I reduced the angle of the firing rod I've had no misfires or failure to fire. I tried to do the same with 100% plastic hulls but they are too small of a diameter inside for my wads and overpowder cards. I have been sent a small brass insert that inserts from the rear with a cap already inside. I will try this method as well as soon as I get the proper size drill bit to drill the hole into the base.

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4200
Loc: Nth QLD Australia
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: casper50]
      #330900 - 07/08/19 05:58 AM

Well done Casper!
She certainly works.....now for some game!

Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1445
Loc: Alaska
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: 93x64mm]
      #330902 - 07/08/19 06:11 AM

Going to take it for grouse this fall.

Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: casper50]
      #330907 - 07/08/19 10:57 AM

I'm happy for you!

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26998
Loc: Beautiful British Columbia, Ca...
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: tinker]
      #330962 - 09/08/19 06:35 AM

Are you using water-glass to seal the overshot wad in the brass cases?
I've been doing that with my 12 bore. Of course, I have to use
11 bore wads in the 12 bore cases.
When I was loading the 16 bore brass cases for the Husky M20 I had, I used 14 bore wads. www.trackofthewolf.com - for circle fly wads

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1445
Loc: Alaska
Re: loaded 4 test rounds for my 16 ga pinfire. [Re: DarylS]
      #330979 - 09/08/19 04:38 PM

I made my own over shot wads. Using elmer's glue. Don't have any water glass at the moment.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 75 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2039

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved