Home | Ezine | Forums | Links | Contact
NitroExpress.com: BRNO ZKK barrel threads?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Haverluk
.224 member


Reged: 18/01/17
Posts: 2
Loc: Graham, WA
BRNO ZKK barrel threads?
      #326467 - 27/03/19 03:51 AM

Looking to change out some barrels on some BRNO ZKK actions.

Curious of the barrel thread sizes.

The 602 and 550 magnum are M28x2
The 550 standard length is M26x2

What are the thread patterns of the ZKK 601 and 600 (short and standard length actions)?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: BRNO ZKK barrel threads? [Re: Haverluk]
      #326609 - 29/03/19 05:17 PM

G'Day Fella's,

Haverluk, according to my records, they are the following;

Brno ZKK 600-601 = 1.020" x 2.00mm Pitch

Brno ZKK 602 = 1.100" x 2.00mm Pitch

So if you divide the Imperial thread diameter (1020" and 1100") x 25.4, you will end up with the Metric diameter.

Hope that helps

D'oh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4199
Loc: Nth QLD Australia
Re: BRNO ZKK barrel threads? [Re: Homer]
      #326612 - 29/03/19 06:03 PM

Quote:

G'Day Fella's,

Haverluk, according to my records, they are the following;

Brno ZKK 600-601 = 1.020" x 2.00mm Pitch

Brno ZKK 602 = 1.100" x 2.00mm Pitch

So if you divide the Imperial thread diameter (1020" and 1100") x 25.4, you will end up with the Metric diameter.

Hope that helps

D'oh!
Homer



1.020" = 25.908mm
1.100" = 27.940mm

&

Quote:

Looking to change out some barrels on some BRNO ZKK actions.

Curious of the barrel thread sizes.

The 602 and 550 magnum are M28x2
The 550 standard length is M26x2

What are the thread patterns of the ZKK 601 and 600 (short and standard length actions)?



So from Homer's notes the ZKK 600/601 barrels would then verify your notes against the CZ 550 standard action - had a win Haverluk

Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: BRNO ZKK barrel threads? [Re: 93x64mm]
      #326616 - 29/03/19 07:16 PM

Thanks for working that out for us 93x64, Very Much Appreciated.

Regards
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"

Post Extras: Print Post   Remind Me!   Notify Moderator  
Haverluk
.224 member


Reged: 18/01/17
Posts: 2
Loc: Graham, WA
Re: BRNO ZKK barrel threads? [Re: Homer]
      #326618 - 30/03/19 03:30 AM

Thanks Gents!

Makes my life a little easier.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2443
Loc: Melbourne Australia
Re: BRNO ZKK barrel threads? [Re: Haverluk]
      #326623 - 30/03/19 07:48 AM

When cutting a male thread the blank is always made about 0.1mm/0.004" smaller than the nominal size. If the thread is really small than you might only reduce it by 0.002 and if it is a big thread than you might make it 0.008". This is to allow for wear on the tips of the thread cutting tool and makes sure that there is clearance between the crest of the male thread and the root of the female thread. The same process is also used when boring out the hole in preparation for the female thread although to a lesser degree. A properly fitted thread locates on the flanks and not on the ID/OD. Hence why your Nominal thread of M28 actually measures 27.94mm.

If you are using a tap and die as opposed to cutting the thread with a single point cutter such as in a lather or mill, then depending on the material and the thread pitch you may have to increase the clearance to stop the thread tearing or spinning the job.

On some tougher materials and/or multiple lots if you want to speed up the process but only need a commercial thread as opposed to a fitted thread you can screw cut to 80% depth and then finish with a tap or die at high speed and feed in one pass.

Hope some of this helps.


Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 254 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 11307

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved