Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .404 Chamber Reamer dimensions?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1

CommandCar
.333 member

Reged: 18/09/10
Posts: 292
Loc: East Coast, USA

.404 Chamber Reamer dimensions?
#308104 - 22/11/17 09:23 AM

A friend spoke to PTG about a .404 NE reamer and they said there are 2 versions. Version 1 is the CIP standard reamer. Version 2 is another reamer that cuts a very slightly tighter chamber with a different throat angle and pitch. I do not have the drawings with me, but the CIP seemed to cut a slightly sloppy chamber and version #2 cut one closer to the case dimensions listed in Cartridges of the World. PTG says version #2 is popular right now. Which one should my friend order and why?

Thanks in advance.

CC

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26998
Loc: Beautiful British Columbia, Ca...

Re: .404 Chamber Reamer dimensions? [Re: CommandCar]
#308107 - 22/11/17 10:14 AM

I would use #2 if it is closer, but still slightly larger than the chamber.

CIP specs tend to be quite oversize in head and sometimes neck dimensions, making for over-sizing/over-working the brass. With expensive brass, you normally do not want that.

What is nice when ordering a wildcat reamer, is getting what you want, measurement wise.

I have always had good luck with Dave Kiff, of Pacific Tool and Gauge. That said, I know nothing of the .404NE, except that I've wanted one since I was 15yrs. old.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Altamaha
.333 member

Reged: 29/12/08
Posts: 376
Loc: Washington State USA

Re: .404 Chamber Reamer dimensions? [Re: DarylS]
#308466 - 29/11/17 06:58 AM

Drawing of my reamer. I bought it from Pacific Tool and Gauge around 15 years ago.

Edited by Altamaha (29/11/17 07:01 AM)

Post Extras:

Muskwa
.224 member

Reged: 03/11/07
Posts: 6
Loc: BC, Canada

Re: .404 Chamber Reamer dimensions? [Re: Altamaha]
#309006 - 15/12/17 12:23 PM

Daryl,

Do you know of any gunsmiths in western Canada that have a 404 Jeffery reamers?
I know Bob Galloway in Alberta will chanbmber for this cartridge, he did a 404 that I have.

Thanks,
Hans

Post Extras:

Pages: 1

Extra information

0 registered and 35 anonymous users are browsing this forum.

Moderator:

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4040

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact