Home | Ezine | Forums | Links | Contact
NitroExpress.com: Q. Building a new .303 Mauser?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
PapaScarface
.224 member


Reged: 28/08/15
Posts: 40
Loc: NSW, Australia
Q. Building a new .303 Mauser?
      #304942 - 07/09/17 08:54 PM

How much work would go into, and how hard would it be to convert a Mauser 98 action to .303 British?
Those old rigbys made in 303 have me dreaming again, just wanna see if it's a feesable idea to look at going ahead with.

Edited by PapaScarface (07/09/17 09:10 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Carpetsahib
.333 member


Reged: 29/04/07
Posts: 435
Loc: Western NC
Re: Q. Building a new .303 Mauser? [Re: PapaScarface]
      #304954 - 08/09/17 01:23 AM

Quote:

How much work would go into, and how hard would it be to convert a Mauser 98 action to .303 British?
Those old rigbys made in 303 have me dreaming again, just wanna see if it's a feesable idea to look at going ahead with.

It might be possible to use components, such as the bottom metal and trigger, from a Siamese Mauser in such a project. Maybe that is what Rigby did!!! (Just joking).

Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1972
Loc: Denmark
Re: Q. Building a new .303 Mauser? [Re: Carpetsahib]
      #304961 - 08/09/17 03:25 AM

Quote:

Quote:

How much work would go into, and how hard would it be to convert a Mauser 98 action to .303 British?
Those old rigbys made in 303 have me dreaming again, just wanna see if it's a feesable idea to look at going ahead with.

It might be possible to use components, such as the bottom metal and trigger, from a Siamese Mauser in such a project. Maybe that is what Rigby did!!! (Just joking).



No joking here..:LOL

I had a Rigby .303 and by looking at the Siamese Mauser triggerguard, magazine etc I see NO difference. Find a good Siamese Mauser and start from there.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Carpetsahib
.333 member


Reged: 29/04/07
Posts: 435
Loc: Western NC
Re: Q. Building a new .303 Mauser? [Re: rigbymauser]
      #304964 - 08/09/17 05:17 AM

Quote:

Quote:

Quote:

How much work would go into, and how hard would it be to convert a Mauser 98 action to .303 British?
Those old rigbys made in 303 have me dreaming again, just wanna see if it's a feesable idea to look at going ahead with.

It might be possible to use components, such as the bottom metal and trigger, from a Siamese Mauser in such a project. Maybe that is what Rigby did!!! (Just joking).



No joking here..:LOL

I had a Rigby .303 and by looking at the Siamese Mauser triggerguard, magazine etc I see NO difference. Find a good Siamese Mauser and start from there.

Hmmm....I happen to have a couple of Siamese actions. Maybe a Rigby clone would be a good project.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27017
Loc: Beautiful British Columbia, Ca...
Re: Q. Building a new .303 Mauser? [Re: Carpetsahib]
      #304965 - 08/09/17 05:36 AM

Sounds good to me. I built a .45/70 on a Siamese Mauser for a friend in Smithers - decades ago. What a wonderful rifle.
It used the same loads as my .458 (2") American, for exactly the same ballistics.

350gr. at 2,296fps
400gr. at 2,150fps
500gr. at 2,060fps

All with exactly the same load for each bullet weight, 68gr. H335 and CCI250 or Fed 215 primer. Both our chambers had a bit of freebore.
These loads were safe in our rifles, might not be in yours.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
ismith
.224 member


Reged: 22/07/17
Posts: 34
Loc: Helena, MT
Re: Q. Building a new .303 Mauser? [Re: DarylS]
      #305566 - 20/09/17 01:07 PM

I have a project Mauser going in .303. I will be using a Siamese Mauser magazine/ trigger guard if it fits without much work. I'm using an intermediate length FN receiver.

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27017
Loc: Beautiful British Columbia, Ca...
Re: Q. Building a new .303 Mauser? [Re: ismith]
      #305581 - 21/09/17 02:29 AM

Sounds OK - good luck.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
Jorge_in_Oz
.224 member


Reged: 05/03/09
Posts: 22
Loc: Victoria, Australia
Re: Q. Building a new .303 Mauser? [Re: DarylS]
      #307160 - 02/11/17 11:13 AM

Hi there,

I have a Mauser 98 in 303/25 which is a perfect candidate for a 303 Brit. It is a BYF 43 Oberndorf.

Whoever did the work knew what they were doing (except for the bolt handle) as it feeds very smoothly and the rifle is bedded and floated. It is not a pretty rifle as the bending of the bolt handle has been done bush mechanic style but it has a heavy barrel which was pristine when I bought it. The wooden stock is a bit rough but what impressed me about the rifle was that even though I had never reloaded for 303/25 and I used 87 grain pills made out of 22LR cases by The Bullet Factory, it shot a clovered three shot group at 100 meters so it made an awesome fox rifle.

I still have it after 10+ years but I would like to get the bolt handle redone and get a nicer stock for it. I bought a Bell and Carlson stock for it but ended up fitting it to my FN Mauser deer rifle.

It could be turned into a classic rifle with a 303B rebarrel and a nice classic styled wooden stock and some bolt work.

Edited by Jorge_in_Oz (02/11/17 11:15 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
1 registered and 215 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4260

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved