Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Nice group with my Europa 66

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1

dotchicco
.300 member

Reged: 16/11/16
Posts: 137
Loc: ITALY

Nice group with my Europa 66
#298258 - 01/04/17 09:50 PM

For two years i tried to find a good load for my Europa 66 in 8x68S.
But i was using A-frame bullet, and i have find a lot of problems.
Theese bullets are a little bit larger than the european, but it's enoght to bend the collet during the seating operation: the case is very thick and tough. The problem was solved using an acute angle burr and annealing the case. BUT theese good bullets tend to generate high pressure with N160 powder, and also reaching the max pressure i could just achieve 840 ms with 200 grains bullet without exceeding 4400 bar.Always having poor grouping but good terminal effect anyway.
Probably should try MRP powder instead.
Having still N160 i started reloading german bullets, DK, H-Mantel and TIG from RWS.
Well... The old Lady seems to preffer rws bullets. Always good velocity and nice grouping. This is the last outcome, yesterday afternoon.
As latins used to say... unicuique suum.

(all data without any responsability)

[image]

[/image]

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 27009
Loc: Beautiful British Columbia, Ca...

Re: Nice group with my Europa 66 [Re: dotchicco]
#298271 - 02/04/17 02:46 AM

Is that about 2 3/4" to 3" for the 5 shots?

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1972
Loc: Denmark

Re: Nice group with my Europa 66 [Re: DarylS]
#298283 - 02/04/17 04:59 AM

I would say you are getting there. A little more load development and you´ll find the sweet spot.

Post Extras:

dotchicco
.300 member

Reged: 16/11/16
Posts: 137
Loc: ITALY

Re: Nice group with my Europa 66 [Re: rigbymauser]
#298287 - 02/04/17 08:09 AM

The rifle was zeroed with a different bullet.
The first shot is the One on the top. The second shot is the One on the left... A bad mistake with the trigger.. Then i applied the correction to the scope and the result was three holes 4cm over the mouche. With this setting i can aim the target up to 230 meters without corrections.

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 27009
Loc: Beautiful British Columbia, Ca...

Re: Nice group with my Europa 66 [Re: dotchicco]
#298303 - 02/04/17 03:40 PM

Excellent dotchicco - thought maybe that was the case.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

NitroX
.700 member

Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...

Re: Nice group with my Europa 66 8x68S [Re: DarylS]
#345666 - 09/10/20 04:24 AM

Handloading the Great 8

https://mauserfanatic.wordpress.com/2020/09/08/reloading-the-great-8/

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras:

93x64mm
.416 member

Reged: 07/12/11
Posts: 4205
Loc: Nth QLD Australia

Re: Nice group with my Europa 66 8x68S [Re: NitroX]
#345680 - 09/10/20 11:38 PM

Good to see that you've finally found the sweet spot for this one Doc.
You can have a bad time for some calibres' & whatever you do just seems to all go to pot!
Sometimes a simple powder change can lead to a complete reversal in fortunes & then Eureka.....success.
It's a sweet feeling!
I had the same issue with my .308 Norma Magnum.
Great article mate - hope to see more from you.
Cheers
93x64mm

Post Extras:

dotchicco
.300 member

Reged: 16/11/16
Posts: 137
Loc: ITALY

Re: Nice group with my Europa 66 8x68S [Re: 93x64mm]
#345695 - 10/10/20 10:55 AM

Good afternoon Gentlemen,
Happy to know that you enjoyed my work.
Next articles will talk about 9,3x64 and 8x57js. Stay tuned..
Doc.

Post Extras:

NitroX
.700 member

Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...

Re: Nice group with my Europa 66 8x68S [Re: dotchicco]
#345697 - 10/10/20 04:46 PM

Quote:

Good afternoon Gentlemen,
Happy to know that you enjoyed my work.
Next articles will talk about 9,3x64 and 8x57js. Stay tuned..
Doc.

Re-post your articles under your own name and on a separate thread. They are worth it. And hopefully more discussion. I never knew whether to post your articles as you might want to do it yourself.

Keep the articles going. Good work and also good ideas for the next ones.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras:

Pages: 1

Extra information

0 registered and 19 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4540

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact