Home | Ezine | Forums | Links | Contact
NitroExpress.com: John Rigby hammer under lever 450 BPE 3 1/4

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Pages: 1
OahuKaneohe
.275 member


Reged: 03/12/08
Posts: 98
Loc: Hawaii, Oahu, Kaneohe
John Rigby hammer under lever 450 BPE 3 1/4
      #284608 - 28/06/16 10:32 AM

I just received this Rigby last Friday and shot it yesterday for the first time.
Many thanks to a member who put me on the trail to get it. Lots of pics, ask and I can take shots
of what you would like to see.



Right side full length, 28" steel barrels.



Top of breech, dolphin hammers, look for the eyes.



Left side bar action lock, stalking safeties.


Right side bar action, fences.




CCH on hammers that are bent in to the center line of the breech.


Wedge release fore end:



Period Case:


The first 4 shots out of her @ 25 yards. 325 Lead over 45 gr. of IMR 4198 + Kynoch foam wads.




The stock:




Edited by CptCurl (10/01/17 11:02 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Wayne59
.400 member


Reged: 20/06/15
Posts: 1219
Loc: Lagrange Ga. USA
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #284614 - 28/06/16 11:23 AM

WOW! She's a looker. Nice gun

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rockdoc
.400 member


Reged: 07/12/06
Posts: 1213
Loc: NSW, Australia
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Wayne59]
      #284616 - 28/06/16 12:08 PM

That is a great looking rifle. Congratulations.

I haven't seen that type of stalking safety before.

Cheers, Chris


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Rockdoc]
      #284617 - 28/06/16 12:24 PM

What a TREAT!!!!!!
Thank you for the pictures. Lovely.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jim_C
.300 member


Reged: 09/08/14
Posts: 174
Loc: USA
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: DarylS]
      #284624 - 28/06/16 01:59 PM

Now that is just a sweet-looking rifle--thanks for sharing the pictures!

Rockdoc, that stalking safety shows up on a few of the percussion bar locks. From the interior pictures I've seen, that was the only place they could fit them.


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Jim_C]
      #284644 - 28/06/16 09:11 PM

Very nice rifle and a great caliber. Useful for a broad range of game.

Congratulations!

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
Birdhunter50
.375 member


Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #284650 - 28/06/16 10:24 PM

That is a truly great hammer double in a very usable caliber. This is what I picture when I hear the term crisp condition. You did very well, no matter the price. Looks like it is accurate too. Be sure to share the pictures when you first use it on game. Bob

Post Extras: Print Post   Remind Me!   Notify Moderator  
Matabele
.300 member


Reged: 16/09/10
Posts: 230
Loc: Zimbabwe
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Birdhunter50]
      #284667 - 29/06/16 04:03 AM

Beautiful rifle! Do you plan on hunting with it?

Post Extras: Print Post   Remind Me!   Notify Moderator  
OahuKaneohe
.275 member


Reged: 03/12/08
Posts: 98
Loc: Hawaii, Oahu, Kaneohe
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Matabele]
      #284672 - 29/06/16 05:28 AM

This gun weighs 9 lbs even. Paul Robert writes the following in his letter of Certification:

The records from Rigby state that this was made in 1869 as "best center fire double rifle".
for a Mr. M Coates for the sum of 52 pounds 10 shillings. 52 bore

Just 4 years after the end of our Civil War John Rigby made this center fire cartridge gun in 450
BPE 3 1/4 inch case.

The Trapdoor Springfield and the Colt Single Action Armies were both designed in 1873.

Winchester was making the 1866 lever guns and Mauser was making the 1871 bolt action in 43 Mauser.

The Mauser 1871 has not made the transition to the tube magazine 1884 modification yet.

Correct me if I am wrong on these historical moments in time, I just want to focus on this gun that
was designed and built in 1869 per Rigby's records and bring your mind forward 147 years to today when I can shoot and enjoy this timeless treasure. I must preserve it and prepare to pass it on.


Post Extras: Print Post   Remind Me!   Notify Moderator  
lonewulf
.300 member


Reged: 06/08/12
Posts: 227
Loc: South-East Otago, New Zealand
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #284677 - 29/06/16 07:49 AM



OMG, that is just wonderful! Congratulations.


Post Extras: Print Post   Remind Me!   Notify Moderator  
TH44
.375 member


Reged: 21/02/09
Posts: 734
Loc: West UK
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: lonewulf]
      #284680 - 29/06/16 08:41 AM

VERY VERY VERY VERY nice rifle in VERY VERY good condition

Most interesting, classically early, non rebounding bolted locks, flat hammers and "side" locks, lovely fences - excellent

It may even have been used with foil wrapped cartridges, see Hoyem p 78

TH44

edit: I am not trying to tell you how to suck eggs but magnum primers are essential with 4198 especially with such a long case



Edited by TH44 (29/06/16 08:49 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3556
Loc: Colorado
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: TH44]
      #284692 - 29/06/16 02:18 PM

Super nice rifle!
What can you hunt in Hawaii? Would be a very classy pig rifle.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4200
Loc: Nth QLD Australia
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #284717 - 30/06/16 06:03 AM

Quote:

This gun weighs 9 lbs even. Paul Robert writes the following in his letter of Certification:

The records from Rigby state that this was made in 1869 as "best center fire double rifle".
for a Mr. M Coates for the sum of 52 pounds 10 shillings. 52 bore

Just 4 years after the end of our Civil War John Rigby made this center fire cartridge gun in 450
BPE 3 1/4 inch case.

The Trapdoor Springfield and the Colt Single Action Armies were both designed in 1873.

Winchester was making the 1866 lever guns and Mauser was making the 1871 bolt action in 43 Mauser.

The Mauser 1871 has not made the transition to the tube magazine 1884 modification yet.

Correct me if I am wrong on these historical moments in time, I just want to focus on this gun that
was designed and built in 1869 per Rigby's records and bring your mind forward 147 years to today when I can shoot and enjoy this timeless treasure. I must preserve it and prepare to pass it on.



This is what it is all about, keeping all these old pieces going & the loads/components to do so for generations still to come. You're just part of that fine old rifle's history, I hope your kids & grandkids get to enjoy it as much as you obviously are now!
Bloody envious old mate!


Post Extras: Print Post   Remind Me!   Notify Moderator  
bouldersmith
.375 member


Reged: 23/03/06
Posts: 627
Loc: Boulder Colorado
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: 93x64mm]
      #284754 - 01/07/16 05:33 AM

Very glad to see this rifle has made it's new owner happy. The rifle came out of an extraordinary collection of British black powder rifles. There are a few more special pieces in this collection. Contact me for more information.
Steve

--------------------
New website http://www.bertramandco.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
Watson577
.300 member


Reged: 05/03/09
Posts: 132
Loc: Fredericksburg, Virginia USA
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: bouldersmith]
      #284759 - 01/07/16 09:01 AM

Congratulations on the acquisition of a very nice rifle! The styling is very advanced for 1869. If it wasn't for the wedge fastened forearm, this rifle could have been built 30 years later.

Regards,

Jim


Post Extras: Print Post   Remind Me!   Notify Moderator  
mehulkamdar
.416 member


Reged: 09/01/04
Posts: 3688
Loc: State of Ill-Annoy USA.
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Watson577]
      #284800 - 03/07/16 12:16 PM

Magnificent! That is a beautiful rifle! Congratulations, and good hunting!

--------------------
The Ark was made by amateurs. Experts built the Titanic.

Mehul Kamdar


Post Extras: Print Post   Remind Me!   Notify Moderator  
rigbymauser
.400 member


Reged: 15/05/05
Posts: 1972
Loc: Denmark
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: mehulkamdar]
      #285029 - 10/07/16 05:31 PM

Congratulations with such piece. Itīs a time-capsul. Such rifle is evidens that best quality is worth it all.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Dutch44
.275 member


Reged: 23/02/06
Posts: 80
Loc: Missouri
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: rigbymauser]
      #329336 - 13/06/19 01:03 PM

What is the twist rate for your 325 grain projectiles?

Post Extras: Print Post   Remind Me!   Notify Moderator  
OahuKaneohe
.275 member


Reged: 03/12/08
Posts: 98
Loc: Hawaii, Oahu, Kaneohe
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: Dutch44]
      #329362 - 14/06/19 05:57 AM

The Rigby measures to a 1 in 38 inches.

Post Extras: Print Post   Remind Me!   Notify Moderator  
OahuKaneohe
.275 member


Reged: 03/12/08
Posts: 98
Loc: Hawaii, Oahu, Kaneohe
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #329364 - 14/06/19 06:20 AM

Utilizing the Greenhill formula to obtain the optimum twist rate for the: length, diameter, velocity
and specific gravity (I used lead), gave 38.8 inch twist rate.

https://www.vcalc.com/wiki/AndrewBudd/Greenhill+Formula+for+Optimal+Rifling+Twist+Rate


Post Extras: Print Post   Remind Me!   Notify Moderator  
FrankFarmer
.300 member


Reged: 06/08/06
Posts: 172
Loc: Florida USA.
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #329386 - 15/06/19 02:45 AM


Beautiful! Steel barrels and not Damascus?


Post Extras: Print Post   Remind Me!   Notify Moderator  
OahuKaneohe
.275 member


Reged: 03/12/08
Posts: 98
Loc: Hawaii, Oahu, Kaneohe
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: FrankFarmer]
      #329388 - 15/06/19 06:13 AM

Yes, steel barrels.

Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 9036
Loc: There's a lighthouse in the mi...
Re: John Rigby hammer under lever 450 BPE 3 1/4 [Re: OahuKaneohe]
      #329393 - 15/06/19 05:06 PM



--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 24 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 9228

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved