Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: What can you tell me about my Mauser sporter?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1

Fatewood
.224 member

Reged: 19/04/15
Posts: 2
Loc: NC

What can you tell me about my Mauser sporter?
#264066 - 23/04/15 10:26 PM

I have a Mauser sporter which has no manufacturers markings. At some time in it's life it was drilled and tapped for a scope, and was that way when I acquired it. It is marked "8 mm" and has the number 37.51 on both the barrel and receiver. It chambers and fires 8x57 mm JS ammo, but I have only used the low powered American loadings. I'm not sure if has a .318 or .323 bore. It has a nitro proof mark from Vienna, Austria.

The rifle has double set triggers, a shotgun-type trigger guard, and is extensively engraved. The stock has a cheek piece. The front swivel is mounted on the barrel. Attached are a variety of photos of the rifle. Does anyone have any idea who made it or in what year? Is it likely a .318 or .323 bore? This and any other information anyone can provide would be very much appreciated.

Post Extras:

Igorrock
.400 member

Reged: 01/03/07
Posts: 1684
Loc: Finland

Re: What can you tell me about my Mauser sporter? [Re: Fatewood]
#264076 - 24/04/15 12:36 AM

Nice rifle. Quite well made engraving but it's a pity that someone has "bubbad" bold handle, maybe same person who has istalled those weaver -scope mounts. I have no idea who have made this rifle but IMO best way to determine it's real caliber is asking skilled gunsmith to slug the bore and make a chamfer cast.

--------------------
http://promaakari.wordpress.com/

Post Extras:

DORLEAC
.333 member

Reged: 22/01/12
Posts: 468
Loc: Perpignan, France

Re: What can you tell me about my Mauser sporter? [Re: Igorrock]
#264092 - 24/04/15 03:30 AM

8mm caliber, proofed in Austria (Vienna) July 1951.
Certainly a 8x57JS.

DORLEAC
www.dorleac-dorleac.com

Post Extras:

Fatewood
.224 member

Reged: 19/04/15
Posts: 2
Loc: NC

Re: What can you tell me about my Mauser sporter? [Re: DORLEAC]
#264093 - 24/04/15 03:40 AM

Thank you for the info DORLEAC. Nice to hear it's a 8x57JS.

Post Extras:

A10ACN
.300 member

Reged: 30/01/05
Posts: 198
Loc: USA

Re: What can you tell me about my Mauser sporter? [Re: Fatewood]
#264164 - 25/04/15 09:12 PM

I'm going to throw out the opinion that the bottom metal was engraved after import or the engraved bottom metal was added to that rifle. The engraving looks like it came off a G&H or Hoffman and is top shelf. Can't say the same for the jackleg who scoped it and wrenched the bolt handle.

Do you mind looking inside the mag and seeing what numbers are in there?

Post Extras:

DORLEAC
.333 member

Reged: 22/01/12
Posts: 468
Loc: Perpignan, France

Re: What can you tell me about my Mauser sporter? [Re: A10ACN]
#264173 - 25/04/15 11:49 PM

I think it's typical Austrian standard quality engraving depicting edelweiss and red stag.
Griffin & Howe and Hoffman, while engraved by German trained masters, were much better.

DORLEAC
www.dorleac-dorleac.com

Post Extras:

Huvius
.416 member

Reged: 04/11/07
Posts: 3608
Loc: Colorado

Re: What can you tell me about my Mauser sporter? [Re: DORLEAC]
#264174 - 26/04/15 12:13 AM

I agree with Joel.
The engraving here looks much like that which could be ordered from Stoeger or a similar retailer and I think those engraved parts originated in Germany and Austria and then sold to gun builders and home builders.
That is what I would think if the bottom metal was indeed added after the original build.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras:

Pages: 1

Extra information

0 registered and 107 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3340

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact