Home | Ezine | Forums | Links | Contact
NitroExpress.com: Decreasing eyesight & open sights becoming difficult to use?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Double Rifles

Pages: 1 | 2 | (show all)
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: Ripp]
      #254546 - 03/10/14 11:39 PM

Curl,

Bit hard when there is zero after sales service communication.

No there was no difference in terms, was talking to the guys at Trijicon for most of the world except for USA, and pretty much no result. ie see the paragraph above - the supply of one just petered out ...

The two guys there were and are personal acquaintances and friends. One or both (?) are members here. I don't blame them at all, as I have heard how things "work" in that company. I don't think either works there anymore ?

No, I'm not interested in a picatinny rail on a comibination set of barrels or a double rifle. Even a cheap pne.

I do have a base of sorts to try. I'm not going to go into the details of the discussion I had with a dealer in the USA and that it may have problems holding on well. But at least this member helped out with a possible option.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: NitroX]
      #254564 - 04/10/14 03:32 AM

Quote:

No, I'm not interested in a picatinny rail on a combination set of barrels or a double rifle. Even a cheap one.




John,

I'm not suggesting that you slap 6 or 8 inches of Picatinny rail on top of your gun. I'm suggesting you get a blank steel Picatinny rail and have a gunsmith cut off a piece to fit exactly inside the existing dovetail on your gun, without enlarging the dovetail. It will be nearly, if not completely flush with the existing rib. Then the RMR goes on and comes off like a QD mount.

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
9.3x57
.450 member


Reged: 22/04/07
Posts: 5521
Loc: United States
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: CptCurl]
      #254568 - 04/10/14 04:27 AM

Quote:

Quote:

No, I'm not interested in a picatinny rail on a combination set of barrels or a double rifle. Even a cheap one.




John,

I'm not suggesting that you slap 6 or 8 inches of Picatinny rail on top of your gun. I'm suggesting you get a blank steel Picatinny rail and have a gunsmith cut off a piece to fit exactly inside the existing dovetail on your gun, without enlarging the dovetail. It will be nearly, if not completely flush with the existing rib. Then the RMR goes on and comes off like a QD mount.

Curl




John may not be interested but for those that may, Curl is right, a very tidy base can be formed of a section of rail and if steel can be very thin and unobtrusive.

On a separate but related note...where the most Dangerous Game of all is hunted, glass has just about completely replaced iron for all except very few circumstances.

--------------------
What are the Rosary, the Cross or the Crucifix other than tools to help maintain the fortress of our faith in Jesus Christ, the Son of God?


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: 9.3x57]
      #254577 - 04/10/14 06:42 AM

For those who do not want anything to do with a Picatinny fastener, Trijicon also offers their RM57 and RM58 bases. These are designed for ribs and would require making a custom insert to go in the dovetail with proper slots to accept the Trijicon attachment.

RM57 for 11-12 mm ribs.

RM58 for 14-16 mm ribs.







I don't think it is difficult to craft a double rifle mount for a Trijicon RMR, given the available attachments from Trijicon.

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: CptCurl]
      #254596 - 04/10/14 05:16 PM

As explained to you Roscoe, the problem is service and after sales support and actually getting one supplied outside of the USA. Trijicon won't send anything outside of the USA if ordered and dealers outside don't import.

Also that mount, I have one, has no stud under it, and we will see if it moves under recoil. This is what was mentioned might happen.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Edited by NitroX (04/10/14 05:18 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: NitroX]
      #254597 - 04/10/14 05:19 PM

Leupold doesn't seem to have the same problems. As you Americans say "Go figure ..."

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: NitroX]
      #254614 - 04/10/14 09:42 PM

Quote:

Also that mount, I have one, has no stud under it, and we will see if it moves under recoil. This is what was mentioned might happen.




There is an easy solution here. Mill a stop on the base you make for the dovetail. I think Talley does that, and Warne used to do it before re-designing their bases.

As for the customer service and the U.S. export laws, I said I have no solution.

Just trying to help.

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
A10ACN
.300 member


Reged: 30/01/05
Posts: 198
Loc: USA
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: CptCurl]
      #254632 - 05/10/14 01:45 PM

In what state is Dickheadville located? I couldn't find it on the map and very much want to avoid it in any travels........

Post Extras: Print Post   Remind Me!   Notify Moderator  
9.3x57
.450 member


Reged: 22/04/07
Posts: 5521
Loc: United States
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: A10ACN]
      #254633 - 05/10/14 01:53 PM

Might be in Pennsylvania between Bird-in-Hand and Intercourse...?

--------------------
What are the Rosary, the Cross or the Crucifix other than tools to help maintain the fortress of our faith in Jesus Christ, the Son of God?


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39896
Loc: Barossa Valley, South Australi...
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: 9.3x57]
      #254643 - 05/10/14 06:34 PM

Quote:

In what state is Dickheadville located? I couldn't find it on the map and very much want to avoid it in any travels........




Quote:

Might be in Pennsylvania between Bird-in-Hand and Intercourse...?




It was funny that when I was once in New York City and in a train station, I picked up a schedule which included a name of a town that I thought was only a joke. I forget its name! But might remember later. It is in some song or joke, about being "from ..." or "going to ..."

You never know if a place actually exists.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
9.3x57
.450 member


Reged: 22/04/07
Posts: 5521
Loc: United States
Re: Decreasing eyesight & open sights becoming difficult to use? [Re: NitroX]
      #254657 - 06/10/14 12:57 AM

Quote:

Quote:

In what state is Dickheadville located? I couldn't find it on the map and very much want to avoid it in any travels........




Quote:

Might be in Pennsylvania between Bird-in-Hand and Intercourse...?




It was funny that when I was once in New York City and in a train station, I picked up a schedule which included a name of a town that I thought was only a joke. I forget its name! But might remember later. It is in some song or joke, about being "from ..." or "going to ..."

You never know if a place actually exists.




Indeed!

I'll tell my wife that next time we go Back East to Pennsy I want to have a fun time going from Bird-in-Hand to Intercourse and back again a few times.

LOL.

--------------------
What are the Rosary, the Cross or the Crucifix other than tools to help maintain the fortress of our faith in Jesus Christ, the Son of God?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)



Extra information
0 registered and 590 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 17655

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved