Home | Ezine | Forums | Links | Contact
NitroExpress.com: Trailboss in 500NE

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
mauserand9mm
.400 member


Reged: 03/09/09
Posts: 1039
Loc: Queensland, Australia
Trailboss in 500NE
      #244942 - 03/04/14 08:41 PM

I'm about to try Trailboss behind a 440gn cast in my 500NE. Anyone else done this before? If so, what velocity did you get? I don't have a chrono and am curious.

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4199
Loc: Nth QLD Australia
Re: Trailboss in 500NE [Re: mauserand9mm]
      #244945 - 03/04/14 09:56 PM

mauserand9mm, I contacted ADI in 2011 in regard to this. There recommendation was the 70% minimum load up to 100% (no compression) of a seated projectile. There best estimate was between 1100-1500fps, but I have a 30+" barrel. I do have Trail boss now but have never tried it in my .500NE.
One of the many things I have to experiment on yet, getting to the range is always my biggest issue!
Sorry I can't help you in this regard
Best of luck with the load, but the 440 gn NFB load comes out at 1750fps in my rifle turns pigs inside out!
Cheers
93x64mm

Post Extras: Print Post   Remind Me!   Notify Moderator  
mauserand9mm
.400 member


Reged: 03/09/09
Posts: 1039
Loc: Queensland, Australia
Re: Trailboss in 500NE [Re: 93x64mm]
      #245036 - 04/04/14 07:12 PM

I do have reduced loads using the 450gn Woodleigh PP - same powder charge as per my 570gn loads ie 106gn AR2209. Regulation and POI is good. This load follows the "80% rule" - same powder charge, 80% projectile weight. This charge is about 10gns over Graeme's NBF loads - I'll have to try it out.

Post Extras: Print Post   Remind Me!   Notify Moderator  
aromakr
.375 member


Reged: 20/04/11
Posts: 849
Loc: Hamilton, Montana
Re: Trailboss in 500NE [Re: mauserand9mm]
      #245101 - 06/04/14 01:59 AM

I sent an email to Hodgdon powders about using Trail Boss, below is there response.
Bob

Trail Boss offers superb versatility in rifle cartridges producing reduced loads using lead or jacketed bullets. Reduced loads make firing such cartridges as the 300 Winchester Magnum or even the 458 Winchester Magnum pure fun!
If you don't see Trail Boss data for your favorite cartridge we have a formula for developing loads for all cartridges and it's simple to follow. This formula may be used in both rifle and pistol applications:

1. Find where the base of the bullet to be loaded is located in the case and make a mark on the outside of the case at this location. Then fill the case to that mark with Trail Boss, pour into the scale pan and weigh. This is your maximum load. Pressures will be below the maximum allowed for this cartridge and perfectly safe to use!

2.Take 70% of this powder charge weight (multiply the maximum load from step 1 by .7), and that is your starting load.

3.Start with this beginning load and work up to your maximum charge, all the while searching for the most accurate reduced load.

Dave Campbell
Customer Service Representative
Hodgdon Powder Company
6430 Vista Drive
Shawnee, KS 66218
913-362-9455 Ext. 117
dcampbell@hodgdon.com

Edited by aromakr (06/04/14 02:00 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:  DarylS 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2835

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved