Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Mauser 66 question

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Mauser 66 question
#237351 - 01/11/13 08:17 AM

I recently saw an extra barrel for a Mauser 66 for sale in caliber 9.3X64, which has a 12.60mm rim. My rifle is set up for the 8X68S, whose rim measures exactly 13mm.

I am wondering if the .40mm (.157") difference in the size of the rim of the two cartridges is small enough to allow a barrel in caliber 9.3X64 to be used in my action, Does anyone know how critical this dimension might be? The other interchangeable barrel I have for this rifle is in 7X66 SE vom Hofe, but its rim size is exactly the same as that of the 8X68S, so it offers no clue to the answer to my question.

Post Extras:

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Re: Kauser 66 question [Re: xausa]
#237377 - 01/11/13 04:23 PM

According to Mauser`s own manual it seems that 9,3x64 has own caliber group without any interchangeability. The only another ammo with same base diameter in my knowledge is 7,5x55 Swiss.

http://stevespages.com/pdf/mauser_66.pdf

--------------------
http://promaakari.wordpress.com/

Post Extras:

spinna
.275 member

Reged: 07/12/11
Posts: 53
Loc: Top End NT Australia

Re: Kauser 66 question [Re: Igorrock]
#237384 - 01/11/13 11:50 PM

According to my calculation .4 of a mm = .0157 of an inch...Which would not be worth worrying about..Sure the extractor would engage ok

4mm = .157"

Cheers
spinna.

Edited by spinna (01/11/13 11:55 PM)

Post Extras:

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Mauser 66 question [Re: spinna]
#237385 - 02/11/13 12:14 AM

Spinna,

That agrees with my calculations. Moreover, the difference in extractor engagement would be only half that amount, or .0078, which is probably within tolerance limitations for the cartridge manufacturer.

I suppose I could resize a 9.3X64 case in my 8X68S sizing die and load a dummy round with it to see how well it extracts.

Post Extras:

lancaster
.470 member

Reged: 06/05/08
Posts: 9038
Loc: There's a lighthouse in the mi...

Re: Mauser 66 question [Re: xausa]
#237388 - 02/11/13 05:34 AM

cant believe the extractor for the bigger 8x68 dont work for the 9,3x64

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

xausa
.400 member

Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA

Re: Mauser 66 question [Re: lancaster]
#237391 - 02/11/13 06:00 AM

Quote:

cant believe the extractor for the bigger 8x68 dont work for the 9,3x64

I don't know that it won't, but I'd rather not spend the money for a 9.3X64 barrel and then find out that it doesn't work.

On later reflection, rather than resizing a 9.3X64 case (which I have only a few of), I think I'll turn the rim on an 8X68S case down to 9.3X64 size and see how it works.

Post Extras:

Pages: 1

Extra information

0 registered and 100 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2916

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact