Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Next Mauser project starting slowly....

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Next Mauser project starting slowly....
#230285 - 21/05/13 12:25 AM

As some of you knows, I have one 9,3x64 m98 Mauser made from m640 (or m246, not exactly sure) Husqvarna. For a long time I have been thinking to built an another Mauser still so I bought one FN made SAKO-Mauser Civil action from one forum member. As here quite usual, it had APEL type sidemount for scope. I dismounted it and local retired gunsmith plugged those holes (not perfect as you`ll see) and made new 17 mm bases for normal mounts. I bought unused Zastava (.30-06 lenght) magazine and SAKO trigger with cocking piece from eGun. The unfinished stock is from germany too. The caliber will be 7x64 but the barrel still missing....

As mentioned, those plugs are not so nice but I think they`ll just go unvisible under the wood.

The side safety wing is still missing but I´ll make some modifications and attach it later.

I like the stock quite much, it costs only 200€ which IMO is cheap price for a such a nice wood

--------------------
http://promaakari.wordpress.com/

Post Extras:

Tentman
.300 member

Reged: 13/06/10
Posts: 128
Loc: Southland, New Zealand

Re: Next Mauser project starting slowly.... [Re: Igorrock]
#230305 - 21/05/13 08:21 AM

Hello Igorrock

A nice project - thank you for sharing.

I like your scope mount bases, this European style has much more appeal to me than the “American style” which to my eye are very “angular” . I assume they take the same rings as the CZ527 rifles ??

Would it be possible to see if your Gunsmith will make a set for a small ring Mauser, as I’m down in New Zealand I would have to have the final fitting completed here.

Thanks

Foster

--------------------
Southland, New Zealand

Post Extras:

lancaster
.470 member

Reged: 06/05/08
Posts: 9038
Loc: There's a lighthouse in the mi...

Re: Next Mauser project starting slowly.... [Re: Tentman]
#230321 - 21/05/13 01:38 PM

stock looking promising, I think you will make it a little bit more elegant?

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

Igorrock
.400 member

Reged: 01/03/07
Posts: 1649
Loc: Finland

Re: Next Mauser project starting slowly.... [Re: lancaster]
#230325 - 21/05/13 04:22 PM

Quote:

Would it be possible to see if your Gunsmith will make a set for a small ring Mauser, as I’m down in New Zealand I would have to have the final fitting completed here.

Actually, I have a long time m98 small ring project waiting so it could be possible too. I´m going to build one small caliber rifle to this action, maybe 6 mm Remington aka 7x57 necked down to 6 mm bullet.

Quote:

I think you will make it a little bit more elegant?

You are right, at least pistol grip and cheek piece will have some modifications.

--------------------
http://promaakari.wordpress.com/

Post Extras:

Pages: 1

Extra information

0 registered and 102 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2886

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact