Home | Ezine | Forums | Links | Contact
NitroExpress.com: Help me pick a blank!

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1 | 2 | (show all)
MaxGera
.275 member


Reged: 15/02/12
Posts: 98
Loc: Pennsylvania, USA
Re: Help me pick a blank! [Re: Rule303]
      #211468 - 24/06/12 01:36 PM

For good grain flow, it's got to be 219 or 215. Nothing else even comes close.

On the other hand, if you are restocking a Ruger 22, the 208 is the way to go.

--------------------
To get things done, stop talking and start doing!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Fontainebleu
.300 member


Reged: 10/12/11
Posts: 161
Loc: norway
Re: Help me pick a blank! [Re: MaxGera]
      #211510 - 25/06/12 07:48 AM

Right, this is the reply I got from the gunsmith re #208.

" #208 is a “slab sawn” blank, which is cut from the log at 90 degrees from blank # 207, which is a “Quarter sawn” blank. The straight grain is still there, but is seen from the top and bottom of the stock instead of the sides. This blank will be very strong and I would put it on any of our Big Bore rifles. #208 will make a stunning stock and will be dark with good contrasting lines."

Think I will go with the 208!


Post Extras: Print Post   Remind Me!   Notify Moderator  
VonGruff
.400 member


Reged: 08/02/09
Posts: 1119
Loc: South Otago, New Zealand.
Re: Help me pick a blank! [Re: Fontainebleu]
      #211522 - 25/06/12 10:48 AM

Slab sawn is the same as plank sawn (and is what I suspected in an earlier post) and indicated with it being included along with the other good blanks. Slab sawn is a very strong cut and with plenty of grain should make into a spectacular rifle.

Von Gruff.

--------------------
Von Gruff.

Exodus 20:1-17

Acts 4:10-12


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)



Extra information
0 registered and 60 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 13737

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved