Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Help needed with a refinish.

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

GG375
.333 member

Reged: 27/02/04
Posts: 347
Loc: Brisbane

Help needed with a refinish.
#203084 - 21/02/12 06:38 AM

Guys

I've decided to have a go at refinishing an old M1910 rifle of mine. It has some light pitting on barrel and general discoloration. Also the stock has seen better days.

My plan is to polish and rust blue the metal work and refinish the stock.

When I get to the polishing/blueing stage is it normal to part the barrel from the action or leave them assembled?

Cheers.

GG

Post Extras:

Gadge
.300 member

Reged: 02/05/04
Posts: 130
Loc: Gippsland, Victoria, Australia

Re: Help needed with a refinish. [Re: GG375]
#203132 - 21/02/12 05:02 PM

Leave assembled. That way there's no chance of barrel vise/wrench marks in the finish.

Regarding polishing, as AFRO408 says, it's pointless to go too fine, when polishing for a rust blue. 320 grit is easily fine enough.

Edit: Open to all. If you're interested in rust bluing, PM me your e-mail addy. I've written up a PDF how-to doco, on making up of a well proven basic aqua regia/iron rusting solution, with references. An expansion of a post I put up here in '05. This requires sources for concentrated Nitric [and maybe Hydrochloric] acids only, of the hard-to-source components.

Edited by Gadge (21/02/12 10:40 PM)

Post Extras:

GG375
.333 member

Reged: 27/02/04
Posts: 347
Loc: Brisbane

Re: Help needed with a refinish. [Re: Gadge]
#203307 - 22/02/12 09:54 PM

Thanks Gadge.

GG

Post Extras:

Gadge
.300 member

Reged: 02/05/04
Posts: 130
Loc: Gippsland, Victoria, Australia

Re: Help needed with a refinish. [Re: GG375]
#203467 - 23/02/12 11:34 PM

De nada. Drop me your e-mail addy in a PM for that writeup.

BTW, the advice given on carding over at AR is good too.

One thing though, you need to use Fine [000 or 0000 grade] degreased steel wool for the carding. Kitchen stuff is too coarse. You can get stainless carding brushes from Brownell's [hand and wheel] too.

--------------------
Cheers,
Doug

Post Extras:

Pages: 1

Extra information

0 registered and 58 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2945

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact