Birdhunter50
.375 member
Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.
|
|
I would like to buy a pair of 12 gauge rifled barrel blanks by any good maker. If you have some for sale you can send me a P.M.stating maker, price, and condition. Thanks,Bob H.
|
tinker
.416 member
Reged: 12/03/05
Posts: 4835
Loc: Nevada
|
|
Ken imports rifled 12bore barrels
Ken Buch, Verney-Carron
301-460-9563
ken@kebcollc.com
www.verney-carron.us
Cheers
Tinker
--------------------
--Self-Appointed Colonel, DRSS--
"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...
|
Birdhunter50
.375 member
Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.
|
|
Thanks Tinker,
I already have Ken working on it but I don't know as yet if he is going to be able to get me some in time for my 12 gauge project. I'll check in with him as soon as he gets back from the S.C.I. convention. Bob
|
DarylS
.700 member
Reged: 10/08/05
Posts: 27589
Loc: Beautiful British Columbia, Ca...
|
|
I think Pac-Nor makes them, but uses what I'd consider a much too fast twist, even for long bullets. I understand someone got one from them with a 22" twist.
--------------------
Daryl
"a gun without hammers is like a Spaniel without ears" King George V
|
tinker
.416 member
Reged: 12/03/05
Posts: 4835
Loc: Nevada
|
|
No problem Bob-
Good luck on the 12bore!
Cheers
Tinker
--------------------
--Self-Appointed Colonel, DRSS--
"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...
|
Birdhunter50
.375 member
Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.
|
|
Gentlemen,
I have found a small supply of new 12 gauge rifle barrels and have a few for sale. P.M. me if you need a pair for a project gun. They will work for a rifled double shotgun or a 12 gauge bore rifle. They are 24 inch long and will make sleeve barrels up to 23.5 inches long after trimming. They measure 1.115" at the breech and straight taper down to .950" at the muzzle. They weigh 2 pound 12 ounces so there is plenty of "meat" on them. Cost is $170.00 per pair plus $20.00 shipping to the lower 48 states. No overseas sales. I'm sorry, but after checking into sending a pair of these overseas, I found out that I needed a $250.00 permit from the State Department to send some out. No Thanks! P.M. me if you are interested. Bob
|
Birdhunter50
.375 member
Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.
|
|
I still have a few of these barrels 24 inch left for sale, however they are going fast. I don't know how much longer I'll be able to get any of these since the company changed the model and shortened the newer style barrels to 22 inches. I do have a pair of the shorter barrels for sale if someone can use them. They don't have the extractor cuts in them so they will make up into 22 inch sleeve barrels just fine. These are built somewhat heavier in the breech area and it looks like the rifling in them is smoother. I would take $150.00 for the pair plus shipping. I know these will work out well for conversions, and you don't really need more inches of barrel than this. My own personal rifled double barrel shotgun has 22 inch barrels on it. Very efficient and handy in the thick brush we hunt in around here. P.M. me for any more information needed or to order a pair of barrels. These may also work out for converting Martini actions and some other single shots. Bob
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
