Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lyman Mannlicher sight

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
C_Davidson
.224 member


Reged: 31/12/11
Posts: 36
Loc: USA
Lyman Mannlicher sight
      #198888 - 07/01/12 04:53 PM

If I were to open a NIB Lyman 1A cocking piece sight for the Mannlichers, what would I find in the box? I'm sure there would be an instruction sheet of some sort, and the sight, but what else? I've seen references to a "nut" being part of the deal, but I don't have any idea what the term nut means in this case, or what it looks like.

Can anyone describe the installation of the 1A cocking piece sight on a rifle? Can anyone share pictures of one installed?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: Lyman Mannlicher sight [Re: C_Davidson]
      #198891 - 07/01/12 06:43 PM

I would say the "Nut" is the cocking piece nut which is dovetailed for the sight to fit into ?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1649
Loc: Finland
Re: Lyman Mannlicher sight [Re: Sarg]
      #198925 - 08/01/12 02:08 AM

Maybe this picture helps to understand what is a "nut"?



http://www.hydroponicsonline.com/store/itm_180711064048.html

--------------------
http://promaakari.wordpress.com/

Edited by CptCurl (10/01/12 10:58 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
C_Davidson
.224 member


Reged: 31/12/11
Posts: 36
Loc: USA
Re: Lyman Mannlicher sight [Re: Igorrock]
      #198927 - 08/01/12 02:53 AM

Is the nut the part extending out to the left, that looks like a cocking piece knob? I don't have a good picture of a Mannlicher cocking piece know to compare that too.

Edited by C_Davidson (08/01/12 02:55 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1649
Loc: Finland
Re: Lyman Mannlicher sight [Re: C_Davidson]
      #198928 - 08/01/12 03:20 AM

Here is 8x56 Mannlichers bolt as dismounted:



--------------------
http://promaakari.wordpress.com/

Edited by CptCurl (10/01/12 10:58 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1445
Loc: Alaska
Re: Lyman Mannlicher sight [Re: Igorrock]
      #198940 - 08/01/12 05:45 AM

How much would I have to spend to get one of these? With my eyes I'd like one for my .375 1910.

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: Lyman Mannlicher sight [Re: casper50]
      #198957 - 08/01/12 09:25 AM

Here is a Lyman installed on a 1895 Mannlicher:



And a Parker - Hale "Sportarget" on a M1903 Mannlicher-Schoenauer:



Edited by CptCurl (10/01/12 10:59 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1792
Loc: middle of Germany
Re: Lyman Mannlicher sight [Re: kuduae]
      #199007 - 09/01/12 01:23 AM

C Davidson & Casper 50, have a look at this thread:
http://forums.nitroexpress.com/showflat.php?Cat=0&Number=151111&an=0&page=0#Post151111

Post Extras: Print Post   Remind Me!   Notify Moderator  
C_Davidson
.224 member


Reged: 31/12/11
Posts: 36
Loc: USA
Re: Lyman Mannlicher sight [Re: kuduae]
      #199019 - 09/01/12 06:14 AM

Thanks for the link, Kuduae. That's s help. I'm wondering if the Lyman came with a special nut, as it looks to me like the standard nut couldn't be dovetailed without cutting away a significant portion of the firing pin. As I mentioned above, I've found reference to some kind of nut being included in the box as part of the sight. If you look at the first picture Igorrock posted, it appears to me the portion of the nut that is dovetailed is thicker than the portion dovetailed in the first picture posted by Kuduae. Igorrock, you picture of the disassembled bolt is much appreciated. It helps me to get my mind around a design I haven't had my hands on for a few decades. Is there any way you could post a picture of the cocking piece nut edge on. I suppose if I could make the right contact, there's a sight collector out there somewhere who knows the details exactly. I've gotten excited about an 1895 Mannlicher sporter project, building one in the British style, and a cocking piece sight would just be the icing on the cake. I need to know what to look for -- or what I might have to have made.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 10 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2451

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved