Forums.NitroExpress.com

I have to part ways with one of my rifles

, and I need your help in determining its value for sale.

It started its life as a Winchester Mod.70 Stainless Classic in .375 H&H. I had it rechambered to .375 Ackley Improved, but never restamped the barrel so as to facilitate taking it to Africa with ammo made with H&H brass.

I replaced the plastic, factory stock, with a custom laminated stock from Serengeti Stockworks in their Merlin configuration using AAA Claro Walnut, with a sculpted cheek piece and 20 lpi checkering. The 24 inch barrel is free-floated, and the action and first two inches of the barrel are glass bedded. Two action cross bolts with ebony caps were added as well. I also had a Pacmyer Decelerator recoil pad installed. The barreled action has had a Ceracoat finish applied in a matte black finish. The factory sights have been replaced with a NECG windage adjustable, single leaf rear sight, and a NECG front sight with a fine bead, and a larger flip up night sight. It is topped with a Leupold 1.75 x 6 Matte Finish Scope, sitting in Talley QD rings and bases, also with a Matte Finish.See the description below.

Stealth Lamination:
Our proprietary Stealth Lamination provides greater strength and stability while preserving the full figure, grain and beauty of the wood. It provides all the stability of a synthetic stock but with the beauty, sound qualities and superior feel of fine walnut. Here's a link to the website that describes their process of lamination: http://kilimanjarorifles.com/features/lamination.html

The Merlin
Also known as "The Montanan", this geometry is a distillation of fifty years of stock-making by Merlin (Mel) Smart. Mel’s authentic geometry was captured by 3D Lightwave scanning allowing us to reproduce its classic lines as the starting geometry for your rifle. It is a classic, full-weight profile with an open grip and full-sized rounded fore-end suitable for all cartridges. This is one of our more popular choices. Comb 3/8", Heel 1/8".

Museum Grade Wood Finish

We call it “Museum Grade” because it is worthy of the finest exhibit in any museum, but developed to perform and withstand the rigors of the field—the working tool as art. Requiring almost two months to perform, and up to 15 different coats and cure periods, all Kilimanjaro and Serengeti wood stock rifles are expertly finished to provide a museum quality furniture grade tung-oil/urethane finish free of any defect, scratch, brush line, void, unfilled wood pore, or holiday as inspected through 4x magnification. The finish is then carefully treated for glare reduction to optimize it for field use.
For the inevitable nicks and dings (which cannot be easily repaired on synthetic stocks), our wood stocks and wood finish are easily repairable to keep your rifle in top aesthetic form. We even include a bottle of touch-up finish that you can do yourself.

This rifle shoots sub moa with both Swift A-frame and Barnes Bullets. If ammo is lost, it will shoot .375 H&H loads to sub moa as well. The rifle has been used, but not at all abused. Metal is 95% plus, and the stock has a few minor small scratches, and one very small ding that I could see. The trigger has been set at a crisp, creep free let-off of 3 1/4 pounds.

Your help in placing a value on this rifle is greatly appreciated. Thanks.