Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Strange 6.x54 case

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

BlueZulu
.224 member

Reged: 08/01/08
Posts: 22
Loc: United Kingdom

Strange 6.x54 case
#185393 - 08/07/11 05:04 AM

My 6.5x54 is finally being allowed into South Africa being exported along with her friends from the UK.
This after 228 phone calls to our firearms department to find out the export permits progress, managed to get through to reception 10 times and through to the lady responsible twice, but Africa is not for sissies so we plod on.
My question chaps I purchased brass in the UK and bought loaded Kyncoch cartridges which is Norma brass I have no trouble loading the norma brass but the other unknown brass has a different rim thickness it measures 0.054 whilst the norma's rim thickness is 0.042, the unknown brass is stamped
H X P

69

Not all the unknown brass however have such thick rims some are okay, any thoughts on origin and what can I do with them to make them shootable?

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: Strange 6.x54 case [Re: BlueZulu]
#185394 - 08/07/11 05:24 AM

It's a Greek Head stamp.

Could the brass have been made from another cartridge ?

.

Edited by 500Nitro (08/07/11 06:08 AM)

Post Extras:

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Strange 6.x54 case [Re: 500Nitro]
#185395 - 08/07/11 05:55 AM

I've seen that stamp on Greek made 303 British cases.

Post Extras:

Tatume
.400 member

Reged: 09/06/07
Posts: 1091
Loc: Gloucester, Va USA

Re: Strange 6.x54 case [Re: Oldbrit]
#185397 - 08/07/11 06:27 AM

I've seen it on Greek 30-06 also.

--------------------
Take care, Tom
NRA Life Member

Post Extras:

GK
.300 member

Reged: 29/10/09
Posts: 161
Loc: Adelaide

Re: Strange 6.x54 case [Re: BlueZulu]
#185423 - 08/07/11 12:02 PM

I'll have to dig out some old info I have, but I believe that there were two Greek army loadings for the 6.5x54mm.

One was for the M1903 etc. rifle/carbine and the other was for an Austrian machine gun that Greece used at the time. I forget the name but I have the info at home in a Greek reference.

I have seen (and may still have) a copy of the box as I translated it for someone.

So maybe the thick rimmed stuff was for the machine gun.

George

Post Extras:

GK
.300 member

Reged: 29/10/09
Posts: 161
Loc: Adelaide

Re: Strange 6.x54 case [Re: GK]
#185445 - 08/07/11 08:25 PM

I'm still looking for my picture of the ammo packet, however I did find my book on Greek smallarms.

The machinegun that I refered to was the Hotchkiss M1926 and M1922. These were normally chambered in 7.92 mauser but were supplied to Greece in 1925-1928 chambered for the 6.5x54MS.

The velocity for this weapon with a 577mm is given as 745m/s for the 6.5x54MS round.

The same text gives the velocity for the M1903 rifles as 680 m/s for a 725mm barrel and 627 m/s for are carbine with a barrel that was 525mm long.

So comparing the velocity of the machine gun to that of the carbine we see that there approx. 100 m/s difference in velocities.

So as I said, there is obviously 2 loadings and it feasible to assume that the rim thickness is thicker for the machinegun loading.

Any chance you can take a few pics of the two cases side by side?

Regards

George

Edited by GK (08/07/11 08:28 PM)

Post Extras:

BlueZulu
.224 member

Reged: 08/01/08
Posts: 22
Loc: United Kingdom

Re: Strange 6.x54 case [Re: GK]
#185483 - 09/07/11 02:10 AM

First time posting an image hope this works, the machine gun concept makes sense although they are not berdan primed cases they do have crimping marks on the top of the primer pocket which may sugest use in a automatic.
They dont fit in my case holder maybe I can get the rim turned down?

Edited by CptCurl (09/07/11 04:43 PM)

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26998
Loc: Beautiful British Columbia, Ca...

Re: Strange 6.x54 case [Re: BlueZulu]
#185531 - 10/07/11 01:52 AM

If turning rims, always turn from inside the extractor groove, not the base.

An easy job with a small lathe.

If you don't have a lathe, it might be easier to just use 'normal' brass.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

darwinmauser
.300 member

Reged: 07/05/07
Posts: 217
Loc: Darwin NT

Re: Strange 6.x54 case [Re: DarylS]
#185546 - 10/07/11 09:13 AM

BlueZulu ,do the cases with the thicker rims fit under the extractor ?

Cheers
pete

Post Extras:

BlueZulu
.224 member

Reged: 08/01/08
Posts: 22
Loc: United Kingdom

Re: Strange 6.x54 case [Re: darwinmauser]
#185566 - 10/07/11 05:22 PM

Yes, they do, problem is the shell holder

Post Extras:

Pages: 1

Extra information

0 registered and 17 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4071

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact