Home | Ezine | Forums | Links | Contact
NitroExpress.com: .357-.310 Nickal

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
AFRO408
.333 member


Reged: 21/01/09
Posts: 312
Loc: Arding NSW
.357-.310 Nickal
      #181868 - 18/05/11 12:56 PM

A mate of mine wanted a cartridge to go in his Martini Cadet, but he wanted to keep the barrel 'cause it has a really good bore and he wanted something with a little more punch than the .310 Cadet/Greener round had.
We discussed it for a while and he left me to it, so I necked down a .357 Magnum case, using a .303 Brit necking die, flared the mouth and seated a Hawksbury River 120g bullet.
When Dave dropped in the next day he took one look at it and was hooked.:)
No doubt it's been done before, but I can't find anything on it.
What do you fellas reckon? Look the goods?
From the left.
.357 Mag with Hawksbury River hard cast bullet.
.357-.310 Nickal
.310 original, heeled, exterior lubed 120g soft lead bullet
.310 with Hawksbury River bullet
.310 with cast .115g bullet from original .32-20 Winchester mould. ( I've yet to try this one on the target)


--------------------
Flinch ? Wot flinch ? Gunsmithing is my PASSION.

Post Extras: Print Post   Remind Me!   Notify Moderator  
FATBOY404
.400 member


Reged: 14/11/09
Posts: 1730
Loc: QLD
Re: .357-.310 Nickal [Re: AFRO408]
      #181880 - 18/05/11 06:13 PM

It looks a little gem mate.

--------------------
"WHATEVER BLOWS YOUR HAIR BACK"

Post Extras: Print Post   Remind Me!   Notify Moderator  
450_Ackley
.375 member


Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia
Re: .357-.310 Nickal [Re: FATBOY404]
      #181896 - 18/05/11 08:56 PM

Very nice AFRO, looks to be a nice looking little cast bullet cartridge, can you please post some more details about the rifle and your loads?

Regards,
David

Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3556
Loc: Colorado
Re: .357-.310 Nickal [Re: 450_Ackley]
      #181919 - 19/05/11 12:46 AM

What is the diameter of the Hawksbury bullet?
I know many 310 Cadet barrels will not shoot a 32-20 bullet well at all.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
AFRO408
.333 member


Reged: 21/01/09
Posts: 312
Loc: Arding NSW
Re: .357-.310 Nickal [Re: 450_Ackley]
      #181954 - 19/05/11 07:57 AM

Quote:

Very nice AFRO, looks to be a nice looking little cast bullet cartridge, can you please post some more details about the rifle and your loads?

Regards,
David



Thanks David,
We'll have to wait for details on the rifle and loads, as I haven't built it yet.
Dave is talking about kicking it off later in the year, as he has other commitments as well.
As soon as we are up and running, I'll be posting details.
We know it will be going into a Martini Cadet Carbine that he owns.

Cheers,
Tony

--------------------
Flinch ? Wot flinch ? Gunsmithing is my PASSION.

Post Extras: Print Post   Remind Me!   Notify Moderator  
AFRO408
.333 member


Reged: 21/01/09
Posts: 312
Loc: Arding NSW
Re: .357-.310 Nickal [Re: Huvius]
      #181955 - 19/05/11 08:08 AM

Huvius, they measure .318" over the hard blue lube, so the real diameter is probably .316". They are also very hard and shatter on steel plates.
They have no heel, so to get them into my tight chamber, I'm having to FLS the loaded round, with the brass I'm using.
Dave is using Bertram brass and his hand loads fit my chamber with the Hawksbury projectile.
My brass has no head stamp at all, so I don't know who made it, but it must be thicker than Bertram's brass.

I'm hoping that the 32-20 bullet (.314") will obturate enough to seal the bore and work, if not, I'll have to get one of CBE's moulds. I'll find out this afternoon if they will shoot.

Tony

--------------------
Flinch ? Wot flinch ? Gunsmithing is my PASSION.

Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: .357-.310 Nickal [Re: AFRO408]
      #294514 - 31/01/17 01:18 AM

Any further developement on this cartridge? I'm thinking of necking 357 mag to take a .300" projectile to use up a new .300 unchambered barrel intended for a 300 Sherwood project and a Martini Cadet action that is not going ahead as a 300 Sherwood.

--------------------
I'm not young enough to know every thing .

Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: .357-.310 Nickal [Re: BigEyeBob]
      #294526 - 31/01/17 07:08 AM

Quote:

Any further developement on this cartridge? I'm thinking of necking 357 mag to take a .300" projectile to use up a new .300 unchambered barrel intended for a 300 Sherwood project and a Martini Cadet action that is not going ahead as a 300 Sherwood.




Pity I think the .300 Sherwood is a very cool cartridge !

Just missed out on a very nice Greener in that cal .

Post Extras: Print Post   Remind Me!   Notify Moderator  
HistoricBore
.300 member


Reged: 28/09/11
Posts: 226
Loc: United Kingdom
Re: .357-.310 Nickal [Re: Sarg]
      #294560 - 01/02/17 03:46 AM

Many of the .310 Cadet rifles have now ended up back here in Britain, as a (poor) substitute for the pistols 'bought' from us 20 years ago. Almost all reloaders have found that the use of a softish lead heel base bullet is essential for any accuracy.

I expect a .357 Magnum case could well work, and would hold more powder, but the higher velocity might cause the bullet to strip its rifling. Let us know how it works!

Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: .357-.310 Nickal [Re: HistoricBore]
      #294671 - 02/02/17 07:47 PM

I already have two martinis in 300 Sherwood ,one is an early Francotte action( pre Francotte patent) the other is built on a Greener Martini Cadet action .The barrel I have is brand new ,its profiled to BSA Cadet profile .Its also unchambered ,I was intending to build a 300 Sherwood with it and the Cadet action and parts I have, but a good friend passed away before Christmas and left me a number of his rifles , one being a custom built 300 Sherwood ,unfired. So I dont really need three 300 Sherwoods ,so I was looking for a case /.300 bullet combination to use the barrel .
One I have been considering is the 30/30 case necked to .300,
others are 357 necked to .300 , 357Maximum necked to .300.Another option is 300 Rook which is a shorter version of the 300 Sherwood,same case only shorter.
Yes the 300 Sherwood is a cool cartridge ,I like

--------------------
I'm not young enough to know every thing .

Edited by BigEyeBob (02/02/17 08:08 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Sarg
.400 member


Reged: 20/01/07
Posts: 1365
Loc: Nil
Re: .357-.310 Nickal [Re: BigEyeBob]
      #294686 - 03/02/17 06:38 AM

Sounds like some nice rifles, be good to see a post or 2 on them !

Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: .357-.310 Nickal [Re: Sarg]
      #294710 - 03/02/17 06:59 PM

I dont have a host site to post and link to.
A few years ago I had images on Photobucket ,that were stolen ,then I recieved an e-mail from the host site telling me that someone was complaining that the images belonged to them ,and wanted me to remove them from my account .
I adamantly refused to remove my own images ,so photobucket closed my account .I've never used an image storage site since .I am a member on Cast Boolits and have images posted there .Same user name .

From the estate of my friend ,I was bequeathed a Greener 300 Sherwood martini custon built by Bob DeVris of Kudu services ,and a N04 pattern BSA sporter in 303.

I purchased 5 other firearms from his estate .
T Andrews 380Rook martini , BSA Martini sporter in 32/20 ,Francotte 297/230Long in tip top condition ,a lovely Aya sxs 410 shotgun in pristine condition .Last but not least a BSA International Martini Target rifle also in extremely good condition .Can you tell I like Martinis?

Unfortunately I run out of funds and was unable to purchase his custom
built 22lr/32-40/410 double rifle/shotgun with three barrel set .
And his Blisset 500x3"Exp double which is on a gun sales related website for sale ATM.

Kev

--------------------
I'm not young enough to know every thing .

Post Extras: Print Post   Remind Me!   Notify Moderator  
HistoricBore
.300 member


Reged: 28/09/11
Posts: 226
Loc: United Kingdom
Re: .357-.310 Nickal [Re: BigEyeBob]
      #294751 - 04/02/17 05:29 AM

A .410 double shotgun with spare barrels in .32-40 sounds like real fun, along with the .22LR barrels for winter practice. I have what was a Midland .410 hammer shotgun, but now linered for .32-20. A great recreational target rifle - other shooters can't keep their hands off it!

Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 4199
Loc: Nth QLD Australia
Re: .357-.310 Nickal [Re: BigEyeBob]
      #294766 - 04/02/17 03:38 PM

Quote:

....
From the estate of my friend ,I was bequeathed a Greener 300 Sherwood martini custon built by Bob DeVris of Kudu services ,and a N04 pattern BSA sporter in 303.

I purchased 5 other firearms from his estate .
T Andrews 380Rook martini , BSA Martini sporter in 32/20 ,Francotte 297/230Long in tip top condition ,a lovely Aya sxs 410 shotgun in pristine condition .Last but not least a BSA International Martini Target rifle also in extremely good condition .Can you tell I like Martinis?
...
Kev



No mate, it appears that you don't like Martinis what-so-ever!!!
If for whatever reason that you get sick of them - please donate them to me!
Seriously it is great to see that you saved some really unique pieces mate, if handed in to the police they'd be rusted up in no time, shame about not picking up the others though!
Your friend certainly had a wonderful collection.
93x64mm

Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: .357-.310 Nickal [Re: HistoricBore]
      #294768 - 04/02/17 08:04 PM

Quote:

A .410 double shotgun with spare barrels in .32-40 sounds like real fun, along with the .22LR barrels for winter practice. I have what was a Midland .410 hammer shotgun, but now linered for .32-20. A great recreational target rifle - other shooters can't keep their hands off it!




The 22 barrels and the 32/40 barrels were custom made and not relined 410 barrels ,the original 410 barrels were refurbished and are included in the set .both sets of rifle barrels have thier own unique forend and scopes .
Im rather dissaponited that I cannot afford to buy it ,but then you cant have every thing .

--------------------
I'm not young enough to know every thing .

Post Extras: Print Post   Remind Me!   Notify Moderator  
iomskp
.300 member


Reged: 10/11/08
Posts: 119
Loc: Cairns Queensland Australia
Re: .357-.310 Nickal [Re: BigEyeBob]
      #297243 - 17/03/17 06:04 PM

Hello Kev I have one of the 303/310 cases I told you about, not 303/300 as I thought I will post it to you next week when I get to the post office, when you get it I can put you in touch with the maker if you like I don't think it is much of a jump down from 303/310 to 303/300.

Regards Trevor

Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: .357-.310 Nickal [Re: iomskp]
      #297339 - 19/03/17 09:49 AM

Trevor , thanks for your effort ,appreciated very much.
Do you have my postal address still?.

Kev.

--------------------
I'm not young enough to know every thing .

Post Extras: Print Post   Remind Me!   Notify Moderator  
iomskp
.300 member


Reged: 10/11/08
Posts: 119
Loc: Cairns Queensland Australia
Re: .357-.310 Nickal [Re: BigEyeBob]
      #298213 - 31/03/17 05:16 PM

Sorry Kev can't find your postal address please resend.

Regards Trevor

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39881
Loc: Barossa Valley, South Australi...
Re: .357-.310 Nickal [Re: BigEyeBob]
      #298216 - 31/03/17 10:08 PM

Quote:

his custom
built 22lr/32-40/410 double rifle/shotgun with three barrel set .
And his Blisset 500x3"Exp double which is on a gun sales related website for sale ATM.

Kev



Kev,

If you don't mind what website are they on? Interested in having a look. Thanks.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras: Print Post   Remind Me!   Notify Moderator  
BigEyeBob
.275 member


Reged: 12/05/16
Posts: 60
Loc: Katherine Northern Territory ...
Re: .357-.310 Nickal [Re: NitroX]
      #298485 - 05/04/17 08:25 PM

Sorry for the delay Nitrox , I can email the pics if you wish .

--------------------
I'm not young enough to know every thing .

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 22 anonymous users are browsing this forum.

Moderator:  DarylS 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 10419

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved