Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Mauser 98 Kurz

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1

Tentman
.300 member

Reged: 13/06/10
Posts: 128
Loc: Southland, New Zealand

Mauser 98 Kurz
#162085 - 14/06/10 06:12 PM

Hello Guys (from down in New Zealand)

I've been lurking for while, and see some folks I "know" from other forums, but lots that I don't !!

Now I have a real Mauser I feel qualified to make a "bit of a squeak" as a first post !!

The rifle in question is a "boltless" (sigh) 250-3000. The bore is very shootable and I am following up on several fronts to get (or have made) a bolt - and I expect to give a lot of $SS for one. All suggestions welcome as to where to look.

I don't have any reference books so it would be great if anyone can offer comments on this rifle, model, year of manufacture etc. Serial is 93198

Sorry in advance for the poor photos, when a real photograher shows up here I can post some better ones if there is interest.

Cheers

Foster

Edited by CptCurl (20/06/10 08:51 AM)

Post Extras:

MarkR
.333 member

Reged: 29/07/07
Posts: 296
Loc: NW Vic. Australia

Re: Mauser 98 Kurz [Re: Tentman]
#162087 - 14/06/10 07:33 PM

No interest here at all, I'll give ya 50 bucks for it without the bolt and I'll even pay the freight to Aus.

Seriously, welcome aboard and I hope you have luck with the bolt.

Cheers,
Mark.

Post Extras:

tophet1
.400 member

Reged: 15/09/07
Posts: 1873
Loc: NSW, Australia

Re: Mauser 98 Kurz [Re: MarkR]
#162088 - 14/06/10 07:48 PM

That is well worth getting to shoot again. Hang in there and welcome to NE.

Post Extras:

lancaster
.470 member

Reged: 06/05/08
Posts: 9033
Loc: There's a lighthouse in the mi...

Re: Mauser 98 Kurz [Re: tophet1]
#162090 - 14/06/10 08:56 PM

with patience you can find a lot of lost parts but I see no chance for the kurz bolt.
the new mauser maker can make you also a new kurz bolt for a lot of money.
I would go the best gunmaker in your area and let him short a standard bolt, the best way!

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras:

JRL
prev-Sponsor

Reged: 02/02/10
Posts: 20
Loc: UK

Re: Mauser 98 Kurz [Re: lancaster]
#162107 - 15/06/10 07:00 AM

Welcome Tentman

We will be running Kurtz actions to original dimensions in the future. The date is not confirmed yet but it will happen.
When we do I will be only too happy to sell you a bolt and firing pin.

It is well worth hanging on to.

If you check in on the web site:

www.johnrigbylondon.com

you can e-mail us and be added to the monthly newsletter where we will announce their availability.

Best Wishes.

Post Extras:

Huvius
.416 member

Reged: 04/11/07
Posts: 3556
Loc: Colorado

Re: Mauser 98 Kurz [Re: JRL]
#162108 - 15/06/10 07:30 AM

I agree with Lancaster.
There have been quite a few Kurz replica actions made up on shortened actions.
Doesn't seem too complex a project for the bolt, pin and extractor only.

--------------------
He who lives in the past is doomed to enjoy it.

Post Extras:

Pages: 1

Extra information

0 registered and 37 anonymous users are browsing this forum.

Moderator: NitroX

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3772

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact