Home | Ezine | Forums | Links | Contact
NitroExpress.com: Stock for BSA Model D or E needed

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
Brithunter
.300 member


Reged: 17/03/10
Posts: 184
Loc: Lincolnshire, England
Stock for BSA Model D or E needed
      #161456 - 04/06/10 05:56 PM

Hi All,

Due to mess up in communications the stock which I should have had to replace the butchered one that it came with has been sent to and sold at Auction. So I now find that a suitable stock is needed for this BSA restoration.

For those who might not be aware the BSA Models D & E are sporterised P-14's and P-17's converted by BSA during the period 1949-1954 this is my Model E:-




The mode D had a rounded tip to the forestock rather than the schnable of the Model E



The bottom one is the restoration project which now has the new barrel fitted. The stock you can see has been whittled away and the hand of the stock is very thin and actually has a crack in it. In fact the more I look at it the more I wonder if this is the BSA stock at all or someones attempt at making one?





Then there is the cheekpiece!

Now I understand that most of these went for export and are found fairly commonly in both Canada and New Zealand so there must be a poor and rusted one soemwhere that can donate the stock.

Any help would be appreciated.

--------------------
Don't let the bastards grind you down!

Post Extras: Print Post   Remind Me!   Notify Moderator  
simonsaorsa
.300 member


Reged: 11/05/06
Posts: 172
Loc: UK
Re: Stock for BSA Model D or E needed [Re: Brithunter]
      #161896 - 11/06/10 06:17 AM

Perhaps try Ellwoods Epps gunshop in Ontario(?), Canada. They did a lot of P14 conversions to 303 Epps so they might be able to help perhaps. They have a website.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Brithunter
.300 member


Reged: 17/03/10
Posts: 184
Loc: Lincolnshire, England
Re: Stock for BSA Model D or E needed [Re: simonsaorsa]
      #162037 - 13/06/10 07:30 PM

Thanks but unless I come across a good one at a reasonable price I will use this Parker-Hale adapted Sporter/Target stock:-









I have to bedd it as the old compound has been removed so will clean up the bedding area and re-do that and sort out if I want to leave the drop belly magazine or straighten it out and use the straightened BSA tirgger guard. At the moment that's a std P-14 one fitted. it needs a new but pad, a thinner one to reduce LOP and the dents and compressions steamed out then a complete re-finish. But it's not a bad bit of walnut really. I have an old Cows horn with an interesting Green/Black colourign and I might even try to make a horn tip for this stock and a Horn inlay to fill the old military but plate tang recess.

The bolt handle needs altering or replacing and am considerign using a barrel mounted fron swivel. the hole where the front one has been stripped in the forestock will be repaired and a stud fitted so that if required a Bi-Pod could be used that is unless i can make the horn tip to cover it ......................... Hmmmmm a tange tip to match the hore inlay on the but. There's a thought. The rifle then needs a re-finish.

The BSA stock I missed was being offered for £15 and need a slight repair to the bridge inside between the trigger and the mag well.

--------------------
Don't let the bastards grind you down!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 490 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 3139

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved