Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: John Rigby rising bite action .303 british

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifle Photos & Archive

Pages: 1 | 2 | (show all)

JRL
prev-Sponsor

Reged: 02/02/10
Posts: 20
Loc: UK

Re: John Rigby rising bite action .303 british [Re: WesF]
#157622 - 27/03/10 12:48 PM

"The Rigby is an ejector rifle. There's no switch on the forend, so I assume it's not a selective ejector. I would assume that a selective ejector would enhance the value of the gun. But, I'm not sure."

Wes

Remove the forend.

Approximately 2/3 the way along the forend Iron from the knuckle there should be a nut, most often square about 3/16 across flats.

If you undo this nut about 1- 1 1/2 turns (depending on its initial set), then this will turn off the ejectors, it acts to remove the tension from the ejector spring. Do it back up to re-engage them. DO NOT OVER TIGHTEN THIS NUT.

Best Wishes

Post Extras:

WesF
.224 member

Reged: 17/03/10
Posts: 27
Loc: Montana

Re: John Rigby rising bite action .303 british [Re: JRL]
#157623 - 27/03/10 12:58 PM

JRL,
there is such a nut. However, it is hex shape. Here are some photos of the fore end.

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: John Rigby rising bite action .303 british [Re: WesF]
#157625 - 27/03/10 01:23 PM

Quote:

Quote:

500Nitro,

The Rigby is an ejector rifle. There's no switch on the forend, so I assume it's not a selective ejector. I would assume that a selective ejector would enhance the value of the gun. But, I'm not sure. I've also had conflicting reports on side lever vs top lever. Some guys seem to think the side lever is the cat's meow, where other's say it would be worth more if it was a top lever. Personally, I love the side lever. It's the only side lever gun in the collection and I think it's a pretty cool design.

~Wes

Jealousy mate, you have a top grade firearm there and don't let anyone tell you any differently. And in any case, if they want a top lever in that condition, it would be hard to find.

Sidelever or Toplever, it doesn't matter - in the day these guns were made, most top end guns were ordered by customers
to what they wanted so that is likely it had a sidelever - or he had a lot of guns made by Grant !!!! LOL.

I think yours has selective ejectors.

Top end of my price guide then ++++++ depending on the state of the market if you ever sold it.

Anyway, top gun and well done.

Edited by 500Nitro (27/03/10 05:05 PM)

Post Extras:

JRL
prev-Sponsor

Reged: 02/02/10
Posts: 20
Loc: UK

Re: John Rigby rising bite action .303 british [Re: 500Nitro]
#157630 - 27/03/10 02:34 PM

Yes that is the one. some are hex some are square.
If you loosen it as described, it will remove the tension from the ejector spring and the rifle becomes extractor only. You have to experiment a little as each gun is different according to wear, but usually 1-1/2 turns is sufficient.

Best Wishes.

Post Extras:

WesF
.224 member

Reged: 17/03/10
Posts: 27
Loc: Montana

Re: John Rigby rising bite action .303 british [Re: JRL]
#157636 - 27/03/10 03:26 PM

JRL and 500Nitro,

Thanks a bunch for the information. I had no idea the gun had selective ejectors. Thanks for sharing your expertise with a layman like myself

~Wes

Post Extras:

450_366
.400 member

Reged: 17/01/07
Posts: 1068
Loc: Sweden, west-coast.

Re: John Rigby rising bite action .303 british [Re: WesF]
#157638 - 27/03/10 06:20 PM

Value only matters if you want to sell the gun.

--------------------
Andreas

"Yeas it kicks like a mule he said, but always remember that its much worse standing on the other end"

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: John Rigby rising bite action .303 british [Re: 450_366]
#157639 - 27/03/10 06:25 PM

Quote:

Value only matters if you want to sell the gun.

What about Insurance ?

Post Extras:

450_366
.400 member

Reged: 17/01/07
Posts: 1068
Loc: Sweden, west-coast.

Re: John Rigby rising bite action .303 british [Re: 500Nitro]
#157640 - 27/03/10 06:36 PM

Quote:

Quote:

Value only matters if you want to sell the gun.

What about Insurance ?

They never pay you the value anyway, at least not here.

What i ment was if the sidelever adds or takes some 1000$ from the value only matters if you are selling it, and he should keep it (or send it to me)

--------------------
Andreas

"Yeas it kicks like a mule he said, but always remember that its much worse standing on the other end"

Post Extras:

500Nitro
.450 member

Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia

Re: John Rigby rising bite action .303 british [Re: 450_366]
#157641 - 27/03/10 06:42 PM

Quote:

Quote:

Quote:

Value only matters if you want to sell the gun.

What about Insurance ?

They never pay you the value anyway, at least not here.

What i ment was if the sidelever adds or takes some 1000$ from the value only matters if you are selling it, and he should keep it (or send it to me)

Get in the queue !!!

Post Extras:

WesF
.224 member

Reged: 17/03/10
Posts: 27
Loc: Montana

Re: John Rigby rising bite action .303 british [Re: 500Nitro]
#157642 - 27/03/10 07:04 PM

lol I suppose I'll keep it and make due! This gun won't leave my family while I breath.

Post Extras:

450_366
.400 member

Reged: 17/01/07
Posts: 1068
Loc: Sweden, west-coast.

Re: John Rigby rising bite action .303 british [Re: WesF]
#157643 - 27/03/10 07:10 PM

Quote:

lol I suppose I'll keep it and make due! This gun won't leave my family while I breath.

Understandably........ do you have a sister?

--------------------
Andreas

"Yeas it kicks like a mule he said, but always remember that its much worse standing on the other end"

Post Extras:

Paul
.400 member

Reged: 28/08/07
Posts: 1031
Loc: Melbourne, Victoria, Australia

Re: John Rigby rising bite action .303 british [Re: WesF]
#157652 - 27/03/10 09:54 PM

It's a beautiful rifle, Wes, better than any in our humble collection. I have a son named Wes, too, but at 18 his firearm tastes haven't evolved much past pump-actions, I'm afraid.

- Paul

Post Extras:

WesF
.224 member

Reged: 17/03/10
Posts: 27
Loc: Montana

Re: John Rigby rising bite action .303 british [Re: Paul]
#158105 - 02/04/10 07:20 PM

At least he's interested in shooting at all, Paul. Give him time. His tastes will develope over time I'm sure.

~Wes

Post Extras:

Pages: 1 | 2 | (show all)

Extra information

0 registered and 18 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 17351

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact