Forums.NitroExpress.com

400NitroExpress,
Your last post on the "I Read All Of The OSR Thread" and the quotes from a thread on AR below are relevant:

On 4 March last year you referred to a picture of a GSC FN bullet in the following manner:

quote:
"The lands clearly cut through the bands and engraved the full diameter of the shank, which isn't compressible. That's what causes damage to DR barrels."

I replied thus:

quote:
"The barrel groove diameter of a 500NE is 13.00mm (0.512"). The land to land diameter of a 500NE is 12.70mm (0.500"). The bullet you see has a shaft diameter of 12.70mm and, measured on the drive bands will measure 13.010mm (0.5122"). It is therefore not required for the body of the bullet to compress in any way.

You need to contact the owners of the doubles with the damage you describe and ask what brand of monos they used."

You then called me a liar:

quote:
"You posted the photo, which makes it clear that this statement is not true."

You further stated that you contacted the owners of the damaged doubles:

quote:
"Actually, I have, and GS were used."

5 March I replied with:

quote:
"That is a serious allegation and one we must follow up on. Kindly contact the users and ask them to get in touch with us so that we can arrange repair/replacement. That is what we undertake to do if GSC product caused what you say. Now we wait for a response."

8 March I posted:

quote:
"Well, I have had no contact regarding the damage to doubles allegedly caused by GSC bullets. Given that it took only slightly more than 3 hours to contact the people and to go from "I don't know" to "Actually, I have, and GS were used." the delay approaching four days is strange.
If silence prevails, I will start to wonder about the validity of your opinion on other matters and what to believe and what not, when you post."

On 11 March I posted:

quote:
"7 days with no contact other than Dave. Shall we call it what it is?"

(Those who have a look at the thread on AR will see that Dave inserted a little humor in the thread.)

The questions now are:

1. When may I expect an apology from you for making false statements regarding GSC Bullets?

2. When may I expect an apology from you for calling me a liar - with the implication that GSC bullets are not manufactured to the sizes that we say they are?

We are no longer "some guy in Africa" as we are now setting up to manufacture in the USA. Your remarks has had repercussions beyond these two forums and it is time to step up with evidence or admit that you were ill informed and made an incorrect call.