Home | Ezine | Forums | Links | Contact
NitroExpress.com: Barrel Coning Tool

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
bp72double
.224 member


Reged: 12/12/08
Posts: 9
Loc: Arkansas USA
Barrel Coning Tool
      #144911 - 01/11/09 09:43 AM

After several range sessions spent hammering round balls down the barrel of my Pedersoli .72 double rifle, I decided to ask around about coning. Daryl posted a nice description of how to do it with my thumb, but I couldn't bring myself to do it that way on an almost new rifle. A buckskinner friend of mine told me about a man that makes a coning tool:
Muzzle Coning Tool Joe Wood 5311 Briar St. Amarillo, TX. 79109 (806) 352-3032 flintstell@cox.net

so I called the gentleman and asked him to make me one of his tools in .72 caliber. For $60, I received a beautifully machined brass tool designed to create a concentric symmetric barrel cone. Specific instruction were included as well. This tool is designed to be used with a thread tap handle (T-handle) which I bought at a local Lowe's hardware store for about $8. It took a couple of hours to do each barrel, but it isn't really hard at all. I did some of it while watching a TV show. The rifle is now MUCH easier to load, and appears to be more accurate as well, which I attribute to now being able to load a tighter ball/patch combo. And, range time is more fun as well. I will post some pix of targets when I shoot some; for now I can tell you that at 30 yards I can hit 4x4x4 blocks of wood reliably and at 20 I can hit a whitetail deer's heart ;-) Also have killed a few dangerous gallon paint cans at 75 yards, which makes for quite a show when they explode (they were old previously-frozen latex paint from some previous remodeling project).

This tool is available in most calibers from what I've seen. My friend coned his .54 and .50 rifles and pistol and loved it (tool was cheaper too, as Mr. Wood had to charge extra for the larger stock to make a .72 tool).

Doc, in Arkansas USA

Post Extras: Print Post   Remind Me!   Notify Moderator  
degoins
.333 member


Reged: 28/02/06
Posts: 435
Loc: SC, USA
Re: Barrel Coning Tool [Re: bp72double]
      #144962 - 02/11/09 08:09 AM

Thanks for the info.....definately worth a try.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Dphariss
.300 member


Reged: 18/04/06
Posts: 130
Loc: Montana
Re: Barrel Coning Tool [Re: bp72double]
      #145130 - 04/11/09 05:34 AM

Just don't cone too deep. IMO these tools have to shallow an angle.
I have a couple I have made and use carefully. But this is a better crown IMO. Bore is a little fouled from too much powder (proof load) but light and fouling combined to show the crown perfectly.




The relief cut on the lands was made with a tool like this. This is a 2 angle job on a friends hunting rifle. The outer angle was final polished with the wet or dry paper on the thumb trick. I really would try this before coning.



This is for larger bores but I recently re-cut it (again) and made a pilot to do a 50 caliber. Shown here it was for a .67. The 50 crowns were done first with a counter sink and a hand turned "brace" to break the edge of the lands then the tool shown with light pressure and my cordless 1/2 drill. It loads a .495 ball and a .018 patch with just rod pressure. Recovered patches are perfect.
I double stick tape wet or dry paper to it starting with 150 grit ending with 400 or finer.

Dan

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:  DarylS 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4468

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved