Home | Ezine | Forums | Links | Contact
NitroExpress.com: Remington Purchases Dakota Arms (Nesika, Miller etc)

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Remington Purchases Dakota Arms (Nesika, Miller etc)
      #137138 - 11/06/09 11:31 AM

G'Day Fella's

I see that Remington have purchased Dakota Arms (and all of its subsidiaries).

This may make for some interesting Big Bore, Dangerous Game Rifles from the Big Green in the future!?

HooRoo
From
Hommer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Homer]
      #137139 - 11/06/09 11:58 AM

Quote:

G'Day Fella's

I see that Remington have purchased Dakota Arms (and all of its subsidiaries).

This may make for some interesting Big Bore, Dangerous Game Rifles from the Big Green in the future!?

HooRoo
From
Hommer





If they work

Would you trust a / your DG Rifle to a Remington Extractor ?


BTW - A thread already exists on this.

http://forums.nitroexpress.com/showflat....true#Post137136

Edited by 500Nitro (11/06/09 11:59 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: 500Nitro]
      #137142 - 11/06/09 12:27 PM

I personally own six Remington B/Action (600, 673 and 700's), rifles. The wonderful thing about them is that when the magazine is empty, you just drop another cartridge in the ejection port, close the bolt and fire!
You don't need to physically load the magazine, to get back in the game. Now when every second counts, this is a real asset!
As to the most controversial aspect of the Remington 700 series of firearms (and others), the Extractor. I have fired thousands of rounds through these rifles, with out a single failure to extract!
Its called engineering and Mr Mike Walker had it in spades, when he designed this firearm.

HooRoo
From
Hommer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Homer]
      #137143 - 11/06/09 12:32 PM


Hommer

You are one of the few then who would use it for DG Hunting.

Plenty of other people have had the extractors fail, that is
why so many Sako extractors get fitted.

Even the US Military strips the Remington down and replaces a few parts before it is allowed into Combat. I was speaking with someone this morning in the US on a Sniper Rifle Project about just that thing.

If they were that good, then why don't more people use them
for DG hunting ?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: 500Nitro]
      #137147 - 11/06/09 12:54 PM

Quote:


Hommer

You are one of the few then who would use it for DG Hunting.

Plenty of other people have had the extractors fail, that is
why so many Sako extractors get fitted.

If they were that good, then why don't more people use them
for DG hunting ?




500Nitro

I am one more...

Oddly enough--the only extractor I have had to replace was the one I changed on my Remington Custom shop --in .416--listened to all the bs ..so figured I had better change the extractor to a Sako..guess what---the piece of shit broke after less than 40 rounds--have NEVER had an original go bad..I realize they do..just find it odd it has never happened to me..

As to your final statement---when I was over there last year in Zim--of the 5 PH's in Camp--3 were shooting a .416 Remington in caliber--two had Remington actioned rifles..even I found that quite odd..while they were not used all the time, fact is, they were used..

I am not saying they are the greatest thing since sliced bread..far from it..but certainly not in need of the bashing that seems to please so many...don't see too many Ruger, sako, weatherby or other actions being used in custom guns...while the Remington dominates in those areas for middle of the road semi-custom hunting rifles.if you count $2 to $5000. rifles middle of the road..not just by coincidence I would guess..

With all my support I have given them I will probably be taken out the next time I go over and am carrying another Rem..and yes, it will again be my .416...but, we all have to go sometime and I would much rather go that way versus sitting in some fricken nursing home with drool coming out of the corner of my mouth...

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39889
Loc: Barossa Valley, South Australi...
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Ripp]
      #137151 - 11/06/09 01:40 PM

At least Remington buying Dakota means SOMEONE is buying it, rather than it being folded into nothing.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Ripp]
      #137154 - 11/06/09 01:54 PM

G'Day Fella's,

Sorry, but Ripp stole my thunder. Not a problem mate!

Apparently Ripp, his African PH's and I aren't the only ones.
I was just having lunch and reading the current edition (May-June 2009) of SCI Safari Magazine. I see on page 62, that SCI Field Editor, Mr Jon R Jundra after 33 years and 20 African Safari's later, like Ripp also chose to take a Remington 700 with him. In fact he took two Remington 700's!
His Light Rifle choice was a 7mm Rem Mag and his Heavy Rifle, (like Ripp), in .416 Rem Mag!
Mr Sundra used the .416, to bag his 44 1/4" Cape Buffalo and if you go to page 103 of the same magazine, you can see him shooting over his Lamborghini. So I assume he's not short of a dollar but his choice to hunt Dangerous African game was still a Remington 700!

Ripp, I think it's called Fate!
Man, if your number is up it's up, regardless of whether you have a Rigby or a Boito in your hands at the time!

HooRoo
From
Hommer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39889
Loc: Barossa Valley, South Australi...
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Homer]
      #137155 - 11/06/09 02:00 PM

Is he left handed?

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: NitroX]
      #137156 - 11/06/09 02:06 PM

Nitro X, do you mean John Sundra?

Both the Remington's pictured in the SCI Mag article, are Right Hand rifles!

Hommer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Homer]
      #137179 - 12/06/09 11:07 AM

Quote:

G'Day Fella's,

Sorry, but Ripp stole my thunder. Not a problem mate!

Apparently Ripp, his African PH's and I aren't the only ones.
I was just having lunch and reading the current edition (May-June 2009) of SCI Safari Magazine. I see on page 62, that SCI Field Editor, Mr Jon R Jundra after 33 years and 20 African Safari's later, like Ripp also chose to take a Remington 700 with him. In fact he took two Remington 700's!
His Light Rifle choice was a 7mm Rem Mag and his Heavy Rifle, (like Ripp), in .416 Rem Mag!
Mr Sundra used the .416, to bag his 44 1/4" Cape Buffalo and if you go to page 103 of the same magazine, you can see him shooting over his Lamborghini. So I assume he's not short of a dollar but his choice to hunt Dangerous African game was still a Remington 700!

Ripp, I think it's called Fate!
Man, if your number is up it's up, regardless of whether you have a Rigby or a Boito in your hands at the time!

HooRoo
From
Hommer






I read that same article--kind of made me chuckle...especially with the Lamborgini in the photo...now that's funny...

Again, I have no problem with anyone choosing whatever weapon, brand, whatever they want..heck, I have probably had one or more or most of what is being made with my pride being a W/R double in .470...so everyone shoot until your hearts content, makes no difference to me...

As to the topic of when your time is up when it is up..heard today the lady that missed the plane from Brazil to France and therefore avoided certain death last week..was killed yesterday in an auto accident..may her soul rest in peace...but, almost sounds like something from the "Twilight Zone"..

Take care..

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
SharpsNitro
.375 member


Reged: 12/08/08
Posts: 729
Loc: Arizona, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: NitroX]
      #137180 - 12/06/09 11:22 AM

Quote:

At least Remington buying Dakota means SOMEONE is buying it, rather than it being folded into nothing.





Ever hear of "Death with Dignity"?

As a Dakota owner I hope this is a positive change for them. Time will tell.


Post Extras: Print Post   Remind Me!   Notify Moderator  
SharpsNitro
.375 member


Reged: 12/08/08
Posts: 729
Loc: Arizona, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Homer]
      #137181 - 12/06/09 11:25 AM

Quote:

... The wonderful thing about them is that when the magazine is empty, you just drop another cartridge in the ejection port, close the bolt and fire!
You don't need to physically load the magazine, to get back in the game. Now when every second counts, this is a real asset!
As to the most controversial aspect of the Remington 700 series of firearms (and others), the Extractor. I have fired thousands of rounds through these rifles, with out a single failure to extract!
Its called engineering and Mr Mike Walker had it in spades, when he designed this firearm.

HooRoo
From
Hommer





So what controlled feed action besides the Kimber can't do this (this is the only one I know of, I'm not a big bolt gun fan)? I can single feed with my M76 and my Mauser.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: SharpsNitro]
      #137187 - 12/06/09 04:39 PM

G'Day SharpsNitro,

The reason that I mentioned this is that not all M98's and there Clones (and semi-clones) are designed/modified to do this. The original Peter Paul Mauser design, was for a series of cartridges to be stripper clip loaded into the magazine (remember the Thumb Cut-Out, in the left lug raceway) and then fed from there into the chamber. This of coarse applies to M98, military rifles. Original Mauser sporters, may be different?

If I remember correctly, my Ruger M77 MkII in .375 H&H and .350 Rem Mag can sustain this and not chip or break the extractor?
The same goes for my BRNO ZKK 600, in .338-06.

I still need to confirm if this is the case, with my .404 Jeffery?
Just not enough time in a day!

HooRoo
From
Hommer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: SharpsNitro]
      #137197 - 12/06/09 10:35 PM

Quote:

Quote:

...

So what controlled feed action besides the Kimber can't do this (this is the only one I know of, I'm not a big bolt gun fan)? I can single feed with my M76 and my Mauser.




A custom Mark 10 I have does NOT allow to do it--it needs to be modified by a gunsmith in order to allow that..

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
SharpsNitro
.375 member


Reged: 12/08/08
Posts: 729
Loc: Arizona, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Homer]
      #137199 - 13/06/09 01:37 AM

Hommer and Ripp,

Thanks for the info. I have learned enough about the CF actions to look to see if they have the relief cut for the extractor to pop over the rim in a single feed situation. I think its dumb not to have this capability and don't see why makers like Kimber don't accomodate it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Bramble
.375 member


Reged: 29/07/06
Posts: 950
Loc: England
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: SharpsNitro]
      #137220 - 13/06/09 11:27 AM

Quote:

Hommer and Ripp,

Thanks for the info. I have learned enough about the CF actions to look to see if they have the relief cut for the extractor to pop over the rim in a single feed situation. I think its dumb not to have this capability and don't see why makers like Kimber don't accomodate it.





The reason is that it weakens the tip of the extractor where it enters the cartridge rim. It is perfectly possible to do, but, it will always compromise this area of the extractor to a greater or lesser extent.
Another reason for not doing so, is so that the rifle only contains the number of cartridges that the magazine will hold, thus allowing you to withdraw the bolt and thumb the cartridge into the mag' and close the bolt on an empty chamber without a loose round floating around.

Regards


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Bramble]
      #137237 - 14/06/09 12:46 AM

Quote:

Quote:

Hommer and Ripp,

Thanks for the info. I have learned enough about the CF actions to look to see if they have the relief cut for the extractor to pop over the rim in a single feed situation. I think its dumb not to have this capability and don't see why makers like Kimber don't accomodate it.







The reason is that it weakens the tip of the extractor where it enters the cartridge rim. It is perfectly possible to do, but, it will always compromise this area of the extractor to a greater or lesser extent.
Another reason for not doing so, is so that the rifle only contains the number of cartridges that the magazine will hold, thus allowing you to withdraw the bolt and thumb the cartridge into the mag' and close the bolt on an empty chamber without a loose round floating around.

Regards




Bramble,
Not sure I am understanding your statement. When I hunt, whether dangerous game or not, I have a round in the chamber, but especially when hunting dangerous game. The clip is full with one up the pipe...assume anyone using a controlled round feed action would do the same..if not, then I guess the previous post really doesn't matter. But if one does, unless you made the modification above correct???

As I mentioned, I have a mauser style action on a few guns, on the .416 I had the modification made. I really feel it is a great advantage, again probably more so when hunting dangerous game...but to be able to toss another round into the chamber if need be and get off a round quickly...personally would not hunt with a gun that does not have that option..again, that is what I have always been used to..

One other item back to the Remington style actions., we were having this conversation once around camp, and I did not believe them until I tried it....but you can work the Remington action upright, sideways, or upside down and the Remington will still feed..which, depending on how the hunt goes, may have some merit as well..

I am in totally agreement the mauser is probably a better action for dangerous game..my only point is that both can work and have for me..while not a ton of game, current have 72 game animals taken in Africa that would agree..along with literally 100's f N American game...with no jams, broken extractors, bolts gone awry, etc... period.

This discussion has gone on for decades, and I am sure as long as there are people that use both, it will continue. For me, I will use both, but will not discount one for the other ..have not seen a reason to for the last 40 years, so no reason for the next either...

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Ripp]
      #137238 - 14/06/09 12:54 AM


I have had to top feed single rounds on the run into Mauser style actioned guns on numerous occasions when I have run out of ammo when wading into mobs of animals.

Sometimes you just need that "one" to stop an animal from running even further away and it is a very quick and easy way to do it.

If the modifciation is done correctly, it does not weaken the extractor and I have never had an extractor that has been modified fail to remove a case from the chamber after firing.

At the end when going from Buffalo to Buffalo, making sure each one is dead, having the ability to just throw one in without putting it in the magazine helps a lot.

Mobs of pigs are another situation where the fire is thick and furious and the ability to reload one shot can mean the difference between the pig getting away and not getting away.

Just my HO !!!

Maybe I need a 20 round AR 15 with Walnut stock !!!!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Bramble
.375 member


Reged: 29/07/06
Posts: 950
Loc: England
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Ripp]
      #137251 - 14/06/09 08:14 AM

Quote:



Bramble,
Not sure I am understanding your statement. When I hunt, whether dangerous game or not, I have a round in the chamber, but especially when hunting dangerous game. The clip is full with one up the pipe...assume anyone using a controlled round feed action would do the same..if not, then I guess the previous post really doesn't matter. But if one does, unless you made the modification above correct???


Ripp




I think you are asking if the modification is necessary to allow a full mag + 1 in the chamber ?

If so, then that is correct. The extractor must be modified and you must hold down the top round in the mag to allow the bolt to slide over and chamber the loose round.

I do not do that, my rifles are not so modified. If it is a four round mag , then I cycle the bolt when making ready and have 3+1 in the chamber.

I think it is very much personal preference. I like to be able to make the gun safe for whatever reason ( entering vehicles, climbing fences taking a piss etc etc) by pulling back the bolt, thumbing down the round and closing on an empty chamber. If I had to think about a loose round then it would play on my mind both ways, ie is the gun clear when I need it to be, and conversley is it loaded with that extra round when something pops its head up.

500

I am not suggesting that the modification makes the Mauser extractor really week or that it is prone to failure. However by definition as it involves the removal of metal it must weaken the tip to a greater or lessor extent.
IMHO the chance of needing a 5th round is a lessor risk than having a modified extractor jump the rim. To make the mod work, sufficient metal must be removed to allow the extractor to jump the rim on the forward stroke before the outside face of the extractor hits the inside of the RHS bolt raceway. If an un-modified extractor is fitted carefully, there is insufficient clearence here to allow the extractor to slip over the rim on loading and hence on extraction.
IE it cannot run over the rim on sticky extraction, the very worst it can do is rip the rim off.

Regards


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: 500Nitro]
      #137262 - 14/06/09 09:08 AM

Quote:


Just my HO !!!

Maybe I need a 20 round AR 15 with Walnut stock !!!!





Man, for the pig scenario you described...an AR would be awesome--in .223 but for pigs maybe a .308 or the new 6.8 caliber..one of those and a 30 round mag..you would be set...

I have used them in .223 on coyotes..very handy on the running shots...

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
500Nitro
.450 member


Reged: 06/01/03
Posts: 7244
Loc: Victoria, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: Ripp]
      #137264 - 14/06/09 09:20 AM


I need a 308 Minimum as I way into herds of Buffalo more than pigs.

Maybe one of those 458 AR 15's from SOCOM would be the go !!!

But a good semi-auto on a mob of pigs would be nice once
in a while. Nothing like 10 - 20 pigs spread around dead,
the only problem is we don't get the mobs we used to like in the past - drought, chopper shoots etc.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Remington Purchases Dakota Arms (Nesika, Miller etc) [Re: 500Nitro]
      #137289 - 14/06/09 11:39 PM

G'Day Fella's,

You Blokes are bringing back so many memories, from the Pre 1996 days.

Back in them Good Old Days, when we (Australians) were trusted with self-loading firearms, a couple of mates and I would get away most years, for a Pig Shoot. We had a series of properties (farms) that we were welcomed onto because we would Tally Shoot, quite a few Porkers.
The last time we were away was to a property at the southern end of the Maquarie Marshes. We all took away several firearms but our main guns were SKS's (7.62 x 39). We would ride around on Motor Bikes (I had a Honda XR 350), with Leather scabbards down the front fork of the bike and the SKS in it and jump and shoot pork as it presented itself.
The last Trip away we shot 243 pigs (an easy number to remember but I would have preferred 257), for the week. This was after the start of the commercial export of wild pigs (for human consumption), to Germany had commenced, so we didn't get a lot that time.

With really bad droughts and other things, we haven't been away Piggin since then!

Oh, for the Good Old Days!!!

I think it was about this time, that I took up Deer hunting!

HooRoo
From
Hommer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 43 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 5899

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved