Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lancaster smooth oval bore rifling, HAS ANYONE MEASURED BORE

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
doubleriflejack
.333 member


Reged: 11/11/07
Posts: 352
Loc: Oregon, U.S.A.
Lancaster smooth oval bore rifling, HAS ANYONE MEASURED BORE
      #133427 - 25/04/09 07:29 AM

Regarding the Lancaster smooth oval bore rifling, used for a very long time, on the smallest to the largest calibers, on both black powder rifles and nitro rifles too, I have a couple of questions, if anyone has seriously examined, and preferably measured bore(s) on any of these (I would prefer facts based on your examination; not opinion based on your thoughts only):
1. If you actually measured the bore(s) on one or more of these oval bores, or, better yet, if you took a cerrosafe mould of the bore(s), how much variation did you find between the bore and oval size (diameters)? In other words, what is diameter of the oval and what is the dia. of the bore, so one can determine difference between the two, as these essentially function similar to lands (bore), and grooves (oval)? If you did this, please tell me what caliber it was done on.
2. Did lancaster use the same depth of oval, compared to the bore dia., for both black powder rifles and nitro rifles, or did they change the oval depth making for less depth on, say, the nitro rifles?
3. Did they change the twist rate, from Black to nitro, or even from one caliber to another? If you examined twist rate on one or more of these, please tell me what the twist was, and on what caliber.
4. Finally, Have you any conclusions as to most accurate handloads for the oval bore rifling, using bullets of bore diameter, paper patched up to oval diameter, or soft pure lead bullets of oval diameter, patched or unpatched to what diameter, or what other handload did you find most accurate? If so, for what caliber did you do this on?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Anonymous
Unregistered




Re: Lancaster smooth oval bore rifling, HAS ANYONE MEASURED BORE [Re: doubleriflejack]
      #133446 - 25/04/09 12:22 PM

Should contact C. Slagle or Joe Salter on this subject.

http://www.cwslagleantiques.com/

http://www.joesalter.com/

Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: Lancaster smooth oval bore rifling, HAS ANYONE MEASURED BORE [Re: ]
      #133449 - 25/04/09 12:53 PM

I look forward to seeing where this question/thread goes.
I too have always wondered in a similar fashion on the oval bore rifles.

Ask this question over on doublegunshop.com too - there might be someone who's local to that site who could aid in your search for information.



Cheers
Tinker

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 725 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2319

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved