Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: huglu/cz technical question

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Pages: 1

Jeffeosso
.275 member

Reged: 11/01/03
Posts: 52
Loc: Porter, Texas

huglu/cz technical question
#124315 - 17/01/09 02:29 PM

Anyone ever unsolder the monoblock on one of these? The barrels are attached to a block, and I am wondering what the diameter of the barrels are, as they slide in.

considering a 45-120 on one of these

Post Extras:

Bramble
.375 member

Reged: 29/07/06
Posts: 950
Loc: England

Re: huglu/cz technical question [Re: Jeffeosso]
#124378 - 18/01/09 06:31 AM

IMHO They will not be soldered they will be brazed and/or shrink fitted. The remelt temp of the spelter if such will be above the temper point of the monoblock.

If you wish to remove the barrels ie restore the monoblock, you must cut off the barrels and ream out the remainder from the monoblock.

Regards

Post Extras:

Jeffeosso
.275 member

Reged: 11/01/03
Posts: 52
Loc: Porter, Texas

Re: huglu/cz technical question [Re: Bramble]
#124382 - 18/01/09 08:06 AM

Thanks Bramble
Say, with my poor memmory, do i recall you mentioning that your brother builds DRs on these. or was that bonanza?. Think he might have a scrap or spare or blown set of barrels? mine is a 201a, but i think i could headspace any of the 20X or 30X sxs barrels.

thanks
jeffe

--------------------
Why do Scots men wear kilts? Because it's far easier to run with your kilt up than your pants down

Edited by Jeffeosso (18/01/09 08:11 AM)

Post Extras:

AkMike
.416 member

Reged: 19/11/05
Posts: 2576
Loc: Anchorage, Alaska

Re: huglu/cz technical question [Re: Jeffeosso]
#124387 - 18/01/09 08:46 AM

That is Bonanza. His brother used to post here as Colorado IIRC.

--------------------
"When you see that in order to produce, you need to obtain permission from men who produce nothing; when you see that money is flowing to those who deal not in goods, but in favors; you may know that your society is doomed." Ayn Rand

Post Extras:

Jeffeosso
.275 member

Reged: 11/01/03
Posts: 52
Loc: Porter, Texas

Re: huglu/cz technical question [Re: AkMike]
#124388 - 18/01/09 08:52 AM

Thank you.. my huglu uis in serious danger of going under the knife

--------------------
Why do Scots men wear kilts? Because it's far easier to run with your kilt up than your pants down

Post Extras:

DUGABOY1
.400 member

Reged: 02/02/03
Posts: 1340
Loc: TEXAS USA

Re: huglu/cz technical question [Re: Bramble]
#125847 - 05/02/09 04:17 AM

Quote:

IMHO They will not be soldered they will be brazed and/or shrink fitted. The remelt temp of the spelter if such will be above the temper point of the monoblock.

If you wish to remove the barrels ie restore the monoblock, you must cut off the barrels and ream out the remainder from the monoblock.

Regards

Absolutely!

--------------------
..........Mac >>>===(x)===>
DUGABOY1, and MacD37 founding member of DRSS www.doublerifleshooterssociety.com
"If I die today, I have had a life well spent, for I've been to see the Elephant, and smelled the smoke of Africa!"

Post Extras:

Jeffeosso
.275 member

Reged: 11/01/03
Posts: 52
Loc: Porter, Texas

Re: huglu/cz technical question [Re: DUGABOY1]
#126093 - 07/02/09 11:45 AM

they are soldered, and lowish temp at that...

I could have just pulled them apart, if i had known...

doodoo occurs

--------------------
Why do Scots men wear kilts? Because it's far easier to run with your kilt up than your pants down

Post Extras:

Bramble
.375 member

Reged: 29/07/06
Posts: 950
Loc: England

Re: huglu/cz technical question [Re: Jeffeosso]
#126107 - 07/02/09 01:52 PM

I stand corrected and am sorry to have led you wrong.

I have never seen that on a modern production gun. To be frank that seems like a strange way of doing things because when they set the ribs they must have to clamp everything including the monoblock and barrels up, it must all be waving around like a prick in a shirtsleeve. I just cannot see the sense in it, if you are building production mono's then a squirt of liquid CO2 or nitrogen and slip the tubes in to a room temp block and they are there for ever..
Ah well they must have their reasons.

Again I apologise if I caused you additional work.

Regards

Post Extras:

Jeffeosso
.275 member

Reged: 11/01/03
Posts: 52
Loc: Porter, Texas

Re: huglu/cz technical question [Re: Bramble]
#126109 - 07/02/09 02:23 PM

hey - no worries.. like i said, doodoo occurs .. if it comes apart during proofing, then i'll start over.. aint no thing but time spent on one of my favorite hobbies...

like working on 4 wheelers or scouting a deer infested lease, time spent is always fun...

but i am going to prrof the heck out of it

--------------------
Why do Scots men wear kilts? Because it's far easier to run with your kilt up than your pants down

Post Extras:

Pages: 1

Extra information

0 registered and 71 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1219

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact