dons
.333 member
Reged: 18/08/07
Posts: 431
Loc: Essex
|
|
Huvius: My Type G in 9.3x62 Magnum has a barrel marked "Bohler Antinit". I believe this is a higher strength steel. I don't know if all magnum calibers used this special steel, but look for this marking on your barrel.
|
DarylS
.700 member
Reged: 10/08/05
Posts: 27691
Loc: Beautiful British Columbia, Ca...
|
|
Dons, I've never heard of a 9.3x62 Magnum - what is that?
-------------------- Daryl
"a gun without hammers is like a Spaniel without ears" King George V
|
dons
.333 member
Reged: 18/08/07
Posts: 431
Loc: Essex
|
|
Daryl: I'm not really sure but there is one shown in Speed's book and I've seen photos of another. If anyone knows, please share.
|
pjaln
.375 member
Reged: 08/06/06
Posts: 711
Loc: massachusetts ,U.S.A.
|
|
im pretty sure there is no difference between the 2 designations ,,magnum bombe was used to designate a hotter load for the 8x60 the actual cartridge is the same 10 grain difference in the bullet weight,,seems like they just threw the magnum word around ...paul
|
NitroX
.700 member
Reged: 25/12/02
Posts: 40645
Loc: Barossa Valley, South Australi...
|
|
Quote:
Another German design, was the 8 x 68 mm for long range work. With its bigger case, it could propel the heaviest 8 mm bullets at what was considered magnum velocities, way back then. ..... The 8 x 68 mm was introduced in 1938 and it was setting the standards during those early years. However, it never gained a strong following in North America, for its elk and moose, or in Africa for Eland. Its main stronghold has been confined to Europe.
The 8x68S is not un-popular in Africa. I think the above comment is more talking about what US clients take to Africa.
Quote:
8 x 68 mm ammo has become scarce though, but it is still offered by RWS.
Plus Norma and many other European ammo makers.
Quote:
Who will develop the next 8 mm calibre? Who is promoting the 8 mm today? Remington? I dont think so, as the one they have is good enough. Will Winchester perhaps go for a 8 mm after all the years during which they never had one? I doubt it. Will any European country? I dont think so, as the 8 x 68 mm is well designed. The 8 x 60 mm is history, as no manufacturer chambers for it anymore, but in my opinion, just as good as a 30-06 Spr. So, it looks like the 8 mm market has become stagnant. It has nothing to do with design. Existing rifles will be inherited by the next generation, who might use them or the youth might even have their own preferences. Once bullets and cases are becoming scarce, the end is near.
.325 WSM is a new 8mm cartridge.
-------------------- John aka NitroX
...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"
|