Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: I kill one barrel accuracy of my Kodiak.

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

Pages: 1

beleg2
.375 member

Reged: 15/08/07
Posts: 591
Loc: Bahía Blanca - Argentina

I kill one barrel accuracy of my Kodiak.
#112975 - 30/08/08 01:37 AM

Last week I have some problems trying to pull out a patched round ball from my Kodiak double rifle.
I have to hammer the ball out but I forget to use muzzle protection.
Yesterday I tried some patched RB and I found that right barrel paterns.
Today I return to try REALS as I always have good accuracy with them.
Shot two targets, one for each barrel and I put three left shots in less than 3” . Right barrel shots went everywhere 4th bullet never connect.
I can not see any difference on both crownings.
Should I try to smooth crowning and the barrel close to the muzzle with emery?
Any advise would help.
Thanks
Martin

Post Extras:

tinker
.416 member

Reged: 12/03/05
Posts: 4835
Loc: Nevada

Re: I kill one barrel accuracy of my Kodiak. [Re: beleg2]
#112979 - 30/08/08 03:22 AM

Martin-

There should be a machine shop in your area.
Take your barrels to the machinist and have them lightly counterbore (recessed crown) the muzzles of your rifle - both the same bore and depth, to slightly greater than groove diameter.

If you look closely, you'll be able to see this has been done to the muzzles of this rifle...

Make sure that they carefully deburr the job, I typically turn a brass or aluminum rod to similar diameter and contour as the crowns and lap them clean with valve grinding compound.

You should be able to get it turned around inside one day.

--Tinker

--------------------
--Self-Appointed Colonel, DRSS--

"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...

Post Extras:

beleg2
.375 member

Reged: 15/08/07
Posts: 591
Loc: Bahía Blanca - Argentina

Re: I kill one barrel accuracy of my Kodiak. [Re: tinker]
#113015 - 31/08/08 12:33 AM

Thanks Tinker,
I try sone more shooting today and most of the bullets get together.
I hope I pulled those two shots outside the target but Im not shure.
I know I pulled R6 a little.

Thanks
Martin

Edited by beleg2 (31/08/08 12:34 AM)

Post Extras:

beleg2
.375 member

Reged: 15/08/07
Posts: 591
Loc: Bahía Blanca - Argentina

Re: I kill one barrel accuracy of my Kodiak. [Re: beleg2]
#114149 - 11/09/08 03:40 AM

I just confirm that was MY problem.
This tifle is much sesitive to the way you hold it.
If I do my part it shoots OK.
Thanks
Martin

Post Extras:

DarylS
.700 member

Reged: 10/08/05
Posts: 26992
Loc: Beautiful British Columbia, Ca...

Re: I kill one barrel accuracy of my Kodiak. [Re: beleg2]
#114164 - 11/09/08 09:07 AM

Martin- the muzle crown is very important to the ease of loading and being able to use an appropriate thickness of patch. You can do as Tinker suggests, using a tapered object and gringing compound, or the easier method of your thumb and emery cloth - I use 320 grit.

Even if the crowns are cut with an object, they still should have a smoothing with emery to cut any sharp edges between the angles that are produced.

When shooting off bags with a gun that is recoil sensitive- ie: throws shots if not held the same, I hold the gun as if shooting offhand, and rest the back of my left hand on the bags. The left hand grips the forend or barrels the same each time.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras:

Pages: 1

Extra information

0 registered and 37 anonymous users are browsing this forum.

Moderator: DarylS

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2442

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact