Home | Ezine | Forums | Links | Contact
NitroExpress.com: Fitting a Quarter Rib

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1
WCF
.275 member


Reged: 06/05/06
Posts: 61
Loc: georgia
Fitting a Quarter Rib
      #102640 - 17/04/08 04:32 AM

I have previously purchased blank quarter ribs from Dakota Arms. They will make it in just about any configuration. My desire is to contour the bottom edges to fit the contour of the barrels. I have always done this with files/stones, however I'm looking to purchase a lathe and milling machine. Any secrets of the trade in this area would be welcomed.

Thanks in advance

wcf

Post Extras: Print Post   Remind Me!   Notify Moderator  
bouldersmith
.375 member


Reged: 23/03/06
Posts: 626
Loc: Boulder Colorado
Re: Fitting a Quarter Rib [Re: WCF]
      #102691 - 17/04/08 10:19 PM

You should buy Mark Strattons book on just that very thing....metalsmithing tricks of the trade. Mark built a duplicating fixture for his mill and roughs it out on that then final fits as you describe.
steve

--------------------
New website http://www.bertramandco.com

Post Extras: Print Post   Remind Me!   Notify Moderator  
WCF
.275 member


Reged: 06/05/06
Posts: 61
Loc: georgia
Re: Fitting a Quarter Rib [Re: bouldersmith]
      #102706 - 18/04/08 12:29 AM

Thanks so much


A few hours have passed, but wanted to pass on (ya'll might already know this) I spoke with Mr Stratton a few mimutes ago and ordered his book with DVD. A super nice gentleman and more than willing to offer any assistance asked for.



Edited by WCF (18/04/08 04:20 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron_Vella
.333 member


Reged: 29/04/05
Posts: 432
Loc: Oshawa, Ontario, Canada
Re: Fitting a Quarter Rib [Re: WCF]
      #102738 - 18/04/08 06:58 AM

Would one of you be kind enough to post Mark's contact info? I've been going to order his book for ages and never got around to it. Time that I did just that!!

Post Extras: Print Post   Remind Me!   Notify Moderator  
WCF
.275 member


Reged: 06/05/06
Posts: 61
Loc: georgia
Re: Fitting a Quarter Rib [Re: Ron_Vella]
      #102825 - 19/04/08 04:28 AM

Mark Stratton Gunmaker

Address: PO Box 813 Mukilteo, WA 98275 USA
Voice: 1-425-745-8309 Fax:
URL: http://www.gunmaker.net

Email: mark@gunmaker.net

Contact: Mark Stratton
Keywords: octagon rifle barrels, Custom rifles, stockmaking,
Listing ID: 24475

WCF

Post Extras: Print Post   Remind Me!   Notify Moderator  
beleg2
.375 member


Reged: 15/08/07
Posts: 591
Loc: Bahía Blanca - Argentina
Re: Fitting a Quarter Rib [Re: WCF]
      #102827 - 19/04/08 04:51 AM

I tryed to use the URL but it do not work, is it right or my computer?
Thanks
Martin

Post Extras: Print Post   Remind Me!   Notify Moderator  
WCF
.275 member


Reged: 06/05/06
Posts: 61
Loc: georgia
Re: Fitting a Quarter Rib [Re: beleg2]
      #102831 - 19/04/08 05:12 AM

Sorry, I tried also and didn't work, I called him on the phone.

wcf

Post Extras: Print Post   Remind Me!   Notify Moderator  
beleg2
.375 member


Reged: 15/08/07
Posts: 591
Loc: Bahía Blanca - Argentina
Re: Fitting a Quarter Rib [Re: WCF]
      #102839 - 19/04/08 05:28 AM

WCF,
Thanks,
I would like to know more about this book.
What is its name?
Martin

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron_Vella
.333 member


Reged: 29/04/05
Posts: 432
Loc: Oshawa, Ontario, Canada
Re: Fitting a Quarter Rib [Re: beleg2]
      #102882 - 19/04/08 11:14 AM

Many thanks!

Post Extras: Print Post   Remind Me!   Notify Moderator  
WCF
.275 member


Reged: 06/05/06
Posts: 61
Loc: georgia
Re: Fitting a Quarter Rib [Re: Ron_Vella]
      #103027 - 21/04/08 09:06 AM

Ron,
Metalsmithing Tricks of the Trade (I believe)

wcf

Post Extras: Print Post   Remind Me!   Notify Moderator  
buckbrush
.300 member


Reged: 23/08/07
Posts: 120
Loc: Alberta
Re: Fitting a Quarter Rib [Re: WCF]
      #103127 - 22/04/08 05:43 AM

Stratons book is well worth the price! Very informative and full of information not in other Gunsmithing books.

Post Extras: Print Post   Remind Me!   Notify Moderator  
WCF
.275 member


Reged: 06/05/06
Posts: 61
Loc: georgia
Re: Fitting a Quarter Rib [Re: buckbrush]
      #103492 - 25/04/08 12:20 PM

received the book today. excellent investment.

mkd

Post Extras: Print Post   Remind Me!   Notify Moderator  
Mark_Stratton
.224 member


Reged: 26/03/06
Posts: 2
Loc: Washington State
Re: Fitting a Quarter Rib [Re: WCF]
      #103554 - 26/04/08 08:09 AM

I'm glad you all like the book. It all got started when I was teaching NRA summer classes at Trinidad State college. I would bring all of my jigs and fixtures to class and place them on a table for the students to see and make drawings. The student were there for just a week and they had their own projects to complete while they were there. Some of the students asked if I would make the drawings and pass them out in class. Well the book project got out of hand and it turned into a book.

At first I thought that if I ordered a 100 copies from the printer I would sell maybe 20, give one to my mother and have 75 copies sitting in the basement rotting. Well to this date, I have sold over 500 copies. It has gotten nice reviews in both Precision Shooting and Machinist Workshop..

And what's the best thing? Gunmakers starting in the trade don't have to revent the wheel. I won't go to the grave without passing along what I have learned over the years. That's the best thing.. After reading all the postings, my email address is: octbarrel@aol.com

Edited by Mark_Stratton (26/04/08 08:26 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron_Vella
.333 member


Reged: 29/04/05
Posts: 432
Loc: Oshawa, Ontario, Canada
Re: Fitting a Quarter Rib [Re: Mark_Stratton]
      #103566 - 26/04/08 10:31 AM

I phoned Mark this afternoon, after I returned from tukey hunting(no luck), and ordered my copy. I must say that he sounds like a true gentleman and was a pleasure to deal with. I look forward to receiving and reading the book and viewing the DVD.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
1 registered and 79 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 781

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved