Home | Ezine | Forums | Links | Contact
NitroExpress.com: 8 Bore "Clobber Pipe"....

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Pages: 1 | 2 | 3 | 4 | (show all)
3DogMike
.400 member


Reged: 29/01/15
Posts: 1404
Loc: Western Slope, Colorado USA
Re: G.E. Lewis 8 Bore…the "Clobber Pipe" [Re: NitroX]
      #356299 - 22/08/21 10:57 PM

Quote:

Damb that must be an impressive muzzle. What bore diameter is an 8-bore in inches?



The “8 Bore” rifles groove-groove varied from .835” (paper case cartridge) to .875” (thin all brass case).
So basically 7/8”
This Lewis measures .855” in the grooves.

The 4 Bore measured variously right about 1”

- Mike

--------------------
"Here's to killing people you don't like with people you do"

"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
TH44
.375 member


Reged: 21/02/09
Posts: 731
Loc: West UK
Re: G.E. Lewis 8 Bore…the "Clobber Pipe" [Re: NitroX]
      #356348 - 25/08/21 08:58 AM

.835"
Being a rifle the barrels are thicker tan ball gun (mine .835 also) or shotgun
TH


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1404
Loc: Western Slope, Colorado USA
Re: G.E. Lewis 8 Bore…the "Clobber Pipe" [Re: TH44]
      #356349 - 25/08/21 09:41 AM

Quote:

.835"
Being a rifle the barrels are thicker tan ball gun (mine .835 also) or shotgun
TH



Yes, fully rifled bores. This Lewis' barrels weigh 9 lbs 3 oz, the rifle unloaded weighs 15 lbs 8 oz..
- Mike

--------------------
"Here's to killing people you don't like with people you do"

"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
CJF
.300 member


Reged: 07/08/17
Posts: 212
Loc: United States
Re: G.E. Lewis 8 Bore…the "Clobber Pipe" [Re: 3DogMike]
      #356401 - 28/08/21 11:26 AM

Hi Mike - beautiful bore rifle. Thank you for sharing so much great info. I thought you might find these dimensions interesting for comparison...I have a very nice William Ford chamberless 10 from the 1920s. Full coverage engraving. Lovely gun. So it has 8 bore barrels and 10 gauge chambers, proofed for 3.25 thin brass cases and 2.25oz of shot. Barrels weigh half what yours do (4.95 lbs) and barrels are very thick through to the muzzles.

Here are some additional measurements:

at the breech, total width across both barrels is 2.592"
height of right barrel at breech from flats to 12 o'clock: 1.365"
height of left barrel at breech at same point: 1.374"
barrel thickness at breech, measured just inside the cut for rim: 0.243"
diameter of rim relief cut: 0.936"
diameter of chamber just inside rim: 0.862"
width across both barrels at muzzle: 1.874"
height (diameter) of barrels at muzzle: 0.961"
thickness of barrels at muzzle: 0.085"


The barrels are 30" long. Total weight is 10.2lbs.

More info at https://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=276052&page=1


Post Extras: Print Post   Remind Me!   Notify Moderator  
3DogMike
.400 member


Reged: 29/01/15
Posts: 1404
Loc: Western Slope, Colorado USA
Re: G.E. Lewis 8 Bore…the "Clobber Pipe" [Re: CJF]
      #356409 - 30/08/21 12:11 PM

Hello Chris,
Interesting measurements, thanks for adding to the thread.
I will have to measure the Lewis and post the results.
- Mike

--------------------
"Here's to killing people you don't like with people you do"

"Will Rogers never met a fighter pilot"
- Anon

“Always carry a flask of whiskey in case of snakebite, and furthermore always carry a small snake."
-- W. C. Fields


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39059
Loc: Barossa Valley, South Australi...
Re: G.E. Lewis 8 Bore…the "Clobber Pipe" [Re: 3DogMike]
      #356417 - 30/08/21 02:16 PM

Thanks for the answers and measurements.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | 3 | 4 | (show all)



Extra information
0 registered and 17 anonymous users are browsing this forum.

Moderator:  tinker 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 14793

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved