Home | Ezine | Forums | Links | Contact
NitroExpress.com: DORLEAC ZG47 Take-Down Rifle

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Pages: 1
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
DORLEAC ZG47 Take-Down Rifle
      #344561 - 24/08/20 07:25 PM

This light stalking rifle was produced according to our client specifications.
To build this takedown light rifle, chambered for the excellent .270 Winchester, we used a CZ ZG47 system.
Considered by many to be the ultimate evolution of the Mauser 98, this remarkable action was designed by engineer Otakar Galas for the Czechoslovak Zbrojovka and produced in 1947 under the name ZG [Zbrojovka Galas].
We opted for a "detachable stock" type takedown as used by H&H, the only easy disassembly solution guaranteeing headspace with absolute rigor.
To do this, the receiver has been modified accordingly while the stock supports the locking elements. After unscrewing the large captive screw at the front of the magazine, the barrel-receiver assembly is tilted to release it from the rear locking wedge and we obtain two elements of almost equal length, thus making it easier to transport the rifle.
To help with the disassembly, Jean-Baptiste Leveque has made a superb tool combining the excellence of execution with the practical ease of a folding screwdriver.
The barrel is a 24 "Lothar-Walther that carries slanted express rear sight and interchangeable front bead on ramp, the latter being a fine ivory caterpillar.
A fully concealed thread allows the use of a sound suppressor.
The stock made in good French walnut follows the classic lines distinctive of our productions.
There is little ornamentation on this rifle, more intended for the field than for the rack, but Florent Viale engraving is of extreme quality and compliments the few touches of bone and charcoal color case hardening.
All major metal parts have been slow rust blued and the walnut oil finished.
The scope is an old Swarovski Z3 - alas no longer produced - mounted on a set of modified Talley rings.

Regards to all.

DORLEAC
www.dorleac-dorleac.com



01


02


03


04




05


06


07


08


09


10



11


12


13


14


15


16


17


18


19


20


21


22


23


24


25


26


27


28


Edited by NitroX (24/08/20 11:58 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rothhammer1
.400 member


Reged: 06/01/17
Posts: 1804
Loc: The Redwoods of California
Re: DORLEAC ZG47 Take-Down Rifle [Re: DORLEAC]
      #344562 - 24/08/20 07:47 PM



Absolutely delicious.

--------------------
Citizen of the Cherokee Nation


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5268
Loc: Fincastle, Botetourt County, V...
Re: DORLEAC ZG47 Take-Down Rifle [Re: Rothhammer1]
      #344563 - 24/08/20 08:29 PM

That is fabulous! Thank you so much for sharing all the details of your fine work.

I am certain that Mr. A.N.L. will be delighted with the outcome of his project.

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1652
Loc: Australia
Re: DORLEAC ZG47 Take-Down Rifle [Re: CptCurl]
      #344567 - 24/08/20 10:25 PM

Never seen a safety like that one, I like it!

--------------------
.


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: DORLEAC ZG47 Take-Down Rifle [Re: CptCurl]
      #344568 - 24/08/20 10:33 PM

Wow that is some beautiful piece of work there again Mr D!
Can I inquire, does the ZG47 completely field strip down to individual pieces like the original Mauser?
Or does it only strip down into sections like the ZKK's.
I certainly do like the bolt sleeve & safety profile and the action dovetails certainly are a treat - no drilling!
I must say, to make it better could only be done by adding a ZKK pop up peep; now that would certainly add another level of complexity - if it was at all possible?
I understand that the milling of the peep was an extraordinary amount of work, as was the peep itself.
The takedown tool is a nifty piece as well, most definitely kept safe & sound in its gun case.
A very lucky man indeed is the owner of this extra fine piece of kit!


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: DORLEAC ZG47 Take-Down Rifle [Re: 93x64mm]
      #344570 - 24/08/20 10:56 PM


Not only can the ZG47 be dismantled in the same way as the Mauser 98, but the majority of the components are interchangeable.
However, the assembly screws are not threaded to the Whitworth standard but in metric ISO and unlike on the Oberndorf productions the magazine is a two parts affair.
The original finishes are slightly coarse and the whole requires a lot of attention to achieve the standard we are used to.
We can easily consider the addition of a small peep sight in the rear square bridge but, as I specify in the description, we meet the customer's requirements.
That said, many see the ZG47 as the culmination, the epitome of the development of the 98' Mauser action.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
karamoja
.275 member


Reged: 25/04/12
Posts: 83
Loc: Herefordshire, GB
Re: DORLEAC ZG47 Take-Down Rifle [Re: DORLEAC]
      #344571 - 24/08/20 11:40 PM

Absolutely stunning! I don't think I will be able to sleep now for a while - if I were to specify a rifle this would be it. I have long been dreaming of this style of take down rifle, for along time now, hence my post asking for examples of the take down method a few months ago.
For me an English man I really should think in terms of Westley Richards (an hour away) or H&H etc. However I would choose D&D the epitome of the craft. Maybe one day if I am lucky! Perhaps!
Bravo!!!, K


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39055
Loc: Barossa Valley, South Australi...
Re: DORLEAC ZG47 Take-Down Rifle [Re: karamoja]
      #344572 - 25/08/20 12:05 AM

Images added to the NE server, resized to fit the page. Larger images should be able to individually viewed using a new tab or window to open each image in.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39055
Loc: Barossa Valley, South Australi...
Re: DORLEAC ZG47 Take-Down Rifle [Re: NitroX]
      #344573 - 25/08/20 12:05 AM

Joel, as always thanks for posting. And also on the detailed photos to view the takedown system.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
vykkagur
.300 member


Reged: 28/11/19
Posts: 223
Loc: Canada
Re: DORLEAC ZG47 Take-Down Rifle [Re: DORLEAC]
      #344576 - 25/08/20 02:43 AM

What an absolutely exquisite piece of work! The quality of your craftsmanship never ceases to impress, and I echo the sentiments of others who are very grateful that you take the time to supply us with such a comprehensive collection of excellent photos that explain so much of each rifle. In addition to the workmanship, I appreciate the clever little design details. On this one, for example, the discreet treatment of the suppressor threads: That easily could have spoiled the whole look of the rifle if it had ended up looking like it had been adapted from some "ball-cap gun" (meaning, assault rifle). Well done!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Tom_H
.333 member


Reged: 13/04/05
Posts: 334
Loc: Southeast, NY
Re: DORLEAC ZG47 Take-Down Rifle [Re: vykkagur]
      #344579 - 25/08/20 04:03 AM

Beautiful work.
That rifle really checks the boxes for a classic.
One question: I noticed the front recoil lug under the rear site. In your experience, does that have any effect on accuracy?

Thank you

Tom

--------------------
Carbonation without fermentation is tyranny


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: DORLEAC ZG47 Take-Down Rifle [Re: Tom_H]
      #344583 - 25/08/20 08:03 AM

Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm Donuts!

D'oh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
PatagonHunter
.300 member


Reged: 20/01/06
Posts: 249
Loc: Bariloche, Patagonia Argentina
Re: DORLEAC ZG47 Take-Down Rifle [Re: Homer]
      #344586 - 25/08/20 08:42 AM

Hello Mr. DORLEAC,

Beautiful is not enough. Your work improves the good, as usual. Agree about the H&H take down system, One of the best, in my opinion.
I miss by less than 24 hours, some 6 years ago, an almost unused ZG47 in 7x57 with the original scope mount and the original Meopta 3x20 riflescope. I am still kicking my back...
I like very much the general configuration of the ZG47 action, mainly the action body with the mount rails, the bolt, the sights, the trigger and the barrels they used. Anyway, the factory finish is not on par with the Pre II War military or sporting original Mausers.
My respects and admiration.

PH

Edited by PatagonHunter (25/08/20 08:46 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
mckinney
.400 member


Reged: 29/01/09
Posts: 1212
Loc: usa
Re: DORLEAC ZG47 Take-Down Rifle [Re: PatagonHunter]
      #344598 - 25/08/20 05:18 PM

Very hard to improve on these looks. Take away the scope and add a full length leather case and, one could believe it had been stored, unused, in the basement of the Ritz for 100 years. (notwithstanding the dating of the action).

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: DORLEAC ZG47 Take-Down Rifle [Re: DORLEAC]
      #344599 - 25/08/20 05:20 PM

Another highly practical work of art. Well done Mr. D

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: DORLEAC ZG47 Take-Down Rifle [Re: Rule303]
      #344601 - 26/08/20 12:44 AM



Quote:

Another highly practical work of art. Well done Mr. D




Took the words right out of my mouth. I surely enjoy seeing your "builds" Joel.
The art of making fine guns is alive and well, in France.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: DORLEAC ZG47 Take-Down Rifle [Re: Ash]
      #344602 - 26/08/20 01:32 AM

Quote:

Never seen a safety like that one, I like it!




I don't have to be sold on the ZG-47. I own several of them. I like everything about them except for that safety. It works perfectly except for one little problem. The safety is "ON" in the forward position and "OFF" in the rear position, exactly the opposite of every other rifle or shotgun I have owned, except for my other BRNO's. My solution, which I don't much care for, is to install a Model 70 Winchester type bolt shroud and three position safety. I would rather keep the original one, if someone could only come up with a way of reversing the positions.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Wedgetail
.275 member


Reged: 22/07/20
Posts: 75
Loc: Australia- NSW
Re: DORLEAC ZG47 Take-Down Rifle [Re: xausa]
      #344733 - 02/09/20 10:00 AM

Like all your rifles Dorleac - that is absolutely flawless in style, fit and finish, and mechanical fundamentals. What a beauty, I don’t think there’s anything out there to beat it...

--------------------
“A man can never have too much red wine, too many books, or too much ammunition” - Rudyard Kipling


Post Extras: Print Post   Remind Me!   Notify Moderator  
nopride2
.300 member


Reged: 03/01/04
Posts: 108
Loc: Seattle, Wa.
Re: DORLEAC ZG47 Take-Down Rifle [Re: Wedgetail]
      #344826 - 07/09/20 03:04 AM

Your work impresses as always.

Dave


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: DORLEAC ZG47 Take-Down Rifle [Re: nopride2]
      #344857 - 07/09/20 08:51 PM

Great work Joel, beautiful rifle. I love the use of Talley rings which look great on that rifle.

Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
228
.224 member


Reged: 08/08/19
Posts: 12
Loc: Sverige
Re: DORLEAC ZG47 Take-Down Rifle [Re: Waidmannsheil]
      #347393 - 01/12/20 02:01 AM

Very beautiful rifle, as always. i guess that the trigger isn't the original one, what has replaced it?
Regards Niclas


Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: DORLEAC ZG47 Take-Down Rifle [Re: 228]
      #347398 - 01/12/20 03:07 AM

Fantastic

That folding driver is a nice touch!

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: DORLEAC ZG47 Take-Down Rifle [Re: tinker]
      #347401 - 01/12/20 04:37 AM

Yes indeed, Tinker.
Such beautiful work.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
9.3x57
.450 member


Reged: 22/04/07
Posts: 5500
Loc: United States
Re: DORLEAC ZG47 Take-Down Rifle [Re: tinker]
      #347421 - 01/12/20 12:00 PM

Très magnifique!!!

--------------------
What are the Rosary, the Cross or the Crucifix other than tools to help maintain the fortress of our faith in Jesus Christ, the Son of God?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 23 anonymous users are browsing this forum.

Moderator:  NitroX 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 7745

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved