Home | Ezine | Forums | Links | Contact
NitroExpress.com: 7X57

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Pages: 1 | 2 | >> (show all)
metal
.275 member


Reged: 30/04/13
Posts: 66
Loc: Australia
7X57
      #370214 - 12/10/22 09:01 PM

Hi all, here's a 7x57 I built a while ago.
Started with a 1908 Brazilian action, Vardy walnut blank and a TSE barrel. 24 LPI checkering and weighs about 7 1/2 pounds.
Shoots 140 gn Woodleighs at 2750fps.
I did change out the scope for a Z3 3x9x36 Swaro.
Enjoy, cheers Metal.









Edited by metal (13/10/22 07:52 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
LRF
.333 member


Reged: 28/03/11
Posts: 302
Loc: minnesota ,usa
Re: 7X57 [Re: metal]
      #370215 - 12/10/22 09:50 PM

Very nicely done.

Post Extras: Print Post   Remind Me!   Notify Moderator  
degoins
.333 member


Reged: 28/02/06
Posts: 423
Loc: SC, USA
Re: 7X57 [Re: LRF]
      #370220 - 12/10/22 11:30 PM

Great looking rifle!!

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: 7X57 [Re: degoins]
      #370235 - 13/10/22 03:40 AM

Certainly is a good looking rifle.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
tinker
.416 member


Reged: 12/03/05
Posts: 4835
Loc: Nevada
Re: 7X57 [Re: DarylS]
      #370240 - 13/10/22 05:52 AM

Looking sharp

Nice detail around the bottom metal

--------------------
--Self-Appointed Colonel, DRSS--



"It IS a dangerous game, and so named for a reason, and you can't play from the keyboard. " --Some Old Texan...


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: 7X57 [Re: tinker]
      #370242 - 13/10/22 07:10 AM

That is one very nice piece of timber there Metal!
Spectacular more like it!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Louis
.375 member


Reged: 13/05/15
Posts: 977
Loc: France
Re: 7X57 [Re: 93x64mm]
      #370243 - 13/10/22 08:25 AM

Really stunning piece of a rifle!
Which trigger/trigger system did you fit her with ?
Louis

--------------------
"Everything that doesn't kill me makes me stronger"


Post Extras: Print Post   Remind Me!   Notify Moderator  
metal
.275 member


Reged: 30/04/13
Posts: 66
Loc: Australia
Re: 7X57 [Re: Louis]
      #370246 - 13/10/22 09:04 AM

Steel Recknagel with modified bow.

Post Extras: Print Post   Remind Me!   Notify Moderator  
eagle27
.400 member


Reged: 24/01/09
Posts: 1108
Loc: Nelson, New Zealand
Re: 7X57 [Re: Louis]
      #370247 - 13/10/22 09:07 AM

Very well done and of course the low mounted scope sets it off nicely (high mounts being my absolute pet hate). I like the understated Leupold on it too, not sure why you would want or need to change out to a Zeiss?

Personally I would push the 140 grainer faster than 2750fps, the 7x57 equaling if not surpassing the 7mm-08 which easily gets 2860fps to 2900fps from a 22" barrel. I currently load for four 7mm-08's in the family and have in the past loaded for and hunted with a classic BSA Hunter 7x57.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: 7X57 [Re: eagle27]
      #370248 - 13/10/22 09:31 AM

Very nice rifle and nice work. Who's bottom metal did you use and did you do the stock work yourself.

Matt.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
metal
.275 member


Reged: 30/04/13
Posts: 66
Loc: Australia
Re: 7X57 [Re: eagle27]
      #370249 - 13/10/22 09:32 AM

Changed the scope to Z3 Swaro, same physical size as the Leupold 2.5x8. Both excellent scopes but I like the Z3 focus better.
I know I could run a bit warmer but the Norma brass that I originally bought was showing pressure signs so I left it at 2750.
Has worked fine on lots of Sambar.


Post Extras: Print Post   Remind Me!   Notify Moderator  
metal
.275 member


Reged: 30/04/13
Posts: 66
Loc: Australia
Re: 7X57 [Re: Waidmannsheil]
      #370250 - 13/10/22 09:38 AM

Quote:

Very nice rifle and nice work. Who's bottom metal did you use and did you do the stock work yourself.

Matt.



Thanks, I stocked it from the blank, did all the metal including the BM which I converted from the original 1908 just adding new guard and floorplate.

Edited by metal (13/10/22 09:39 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
jvw
.275 member


Reged: 15/05/08
Posts: 99
Loc: Australia
Re: 7X57 [Re: metal]
      #370251 - 13/10/22 09:42 AM

Nice rifle!

Post Extras: Print Post   Remind Me!   Notify Moderator  
FlatTop45
.300 member


Reged: 31/05/16
Posts: 133
Loc: South Texas, U.S.A.
Re: 7X57 [Re: jvw]
      #370252 - 13/10/22 10:59 AM

Beautifully done classic sporter! Thank you for sharing.


J


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: 7X57 [Re: metal]
      #370254 - 13/10/22 11:08 AM

Quote:

Changed the scope to Z3 Swaro, same physical size as the Leupold 2.5x8. Both excellent scopes but I like the Z3 focus better.
I know I could run a bit warmer but the Norma brass that I originally bought was showing pressure signs so I left it at 2750.
Has worked fine on lots of Sambar.




I've a feeling I was using WW brass in my #1 7x57. I was running 2,940fps with 140's with sub moa accuracy and no pressure signs through case expansion measurements. Using IMR4320. Wonderful accuracy.

I would like to buy that rifle back from the fellow with whom I traded it.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
LRF
.333 member


Reged: 28/03/11
Posts: 302
Loc: minnesota ,usa
Re: 7X57 [Re: metal]
      #370255 - 13/10/22 11:08 AM

Quote:

......I stocked it from the blank, .....




Only way to do it .... IMHO


Post Extras: Print Post   Remind Me!   Notify Moderator  
eagle27
.400 member


Reged: 24/01/09
Posts: 1108
Loc: Nelson, New Zealand
Re: 7X57 [Re: DarylS]
      #370257 - 13/10/22 12:35 PM

Quote:

Quote:

Changed the scope to Z3 Swaro, same physical size as the Leupold 2.5x8. Both excellent scopes but I like the Z3 focus better.
I know I could run a bit warmer but the Norma brass that I originally bought was showing pressure signs so I left it at 2750.
Has worked fine on lots of Sambar.




I've a feeling I was using WW brass in my #1 7x57. I was running 2,940fps with 140's with sub moa accuracy and no pressure signs through case expansion measurements. Using IMR4320. Wonderful accuracy.

I would like to buy that rifle back from the fellow with whom I traded it.





Winchester cases in general have a little more capacity than other brands or so I have found with 7mm-08 and 7mm WSM brass, hence can achieve higher velocity with normal pressures using suitable powder.

I too used IMR4320 powder in my BSA 7x57, 45.0grs with the Speer SP 145gr bullet in the Norma brass available about 35 odd years ago. This accurate load gave me an average 2864fps from the 24" barrel and was a good killer on red deer and chamois.
Although the above load showed normal pressures in my rifle I would caution about starting at this level in any rifle.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39055
Loc: Barossa Valley, South Australi...
Re: 7X57 [Re: eagle27]
      #370258 - 13/10/22 02:58 PM

Very nice. Stocked in the American Classic Sporter style.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
264
.375 member


Reged: 15/02/11
Posts: 596
Loc: NT Australia
Re: 7X57 [Re: NitroX]
      #370268 - 13/10/22 07:21 PM

Very nice, cheers Mick

Post Extras: Print Post   Remind Me!   Notify Moderator  
metal
.275 member


Reged: 30/04/13
Posts: 66
Loc: Australia
Re: 7X57 [Re: NitroX]
      #370292 - 14/10/22 09:29 AM

Quote:

Very nice. Stocked in the American Classic Sporter style.



Nitro, I have to point out this is not an American Classic style stock.
It's English/German style with a straighter comb for scope use.
There are elements of the American Classic Rifle, like the straight comb and lack of irons though.
Cheers, Metal.


Post Extras: Print Post   Remind Me!   Notify Moderator  
CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5268
Loc: Fincastle, Botetourt County, V...
Re: 7X57 [Re: metal]
      #370310 - 14/10/22 09:40 PM

Well done! Thanks for sharing your success.

Curl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39055
Loc: Barossa Valley, South Australi...
Re: 7X57 [Re: metal]
      #370313 - 14/10/22 10:40 PM

Quote:

Quote:

Very nice. Stocked in the American Classic Sporter style.



Nitro, I have to point out this is not an American Classic style stock.
It's English/German style with a straighter comb for scope use.
There are elements of the American Classic Rifle, like the straight comb and lack of irons though.
Cheers, Metal.




Similar style to my restocked Parker Hale 1200 M98 in .30-06.

My rifle has a longer forend. If stocked today I would do the forend shorter in a more English style.

Nontheless this modern classic style has class and is usuable with scopes.

Congratulations on your creation.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
PatagonHunter
.300 member


Reged: 20/01/06
Posts: 249
Loc: Bariloche, Patagonia Argentina
Re: 7X57 [Re: NitroX]
      #371770 - 24/11/22 08:41 PM

Hi metal,

An almost perfect 7 mm Mauser Rifle, with an action originally set up for it !!!
I say almost because it lacks iron sights. This style looks naked without them. And I mean an usable, and regulated at 100 meters, simple set of sights.
Congratulations for your work!!!

PH


Post Extras: Print Post   Remind Me!   Notify Moderator  
rglenz
.300 member


Reged: 14/03/08
Posts: 133
Loc: w. Minn
Re: 7X57 [Re: PatagonHunter]
      #371795 - 25/11/22 12:17 PM

Wonderful rifle!


I once had a 1913 Mauser rifle by Rigby, engraved on the barrel was, "regulated for 140 grain bullets
at 2740 fps". Apparently that velocity has been working well for a long time.


Post Extras: Print Post   Remind Me!   Notify Moderator  
szihn
.400 member


Reged: 24/06/07
Posts: 2100
Loc: Wind River Valley, Wyoming
Re: 7X57 [Re: rglenz]
      #371800 - 26/11/22 02:30 AM

Simply perfect.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
0 registered and 7 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 6320

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved