Home | Ezine | Forums | Links | Contact
NitroExpress.com: A nice Rigby .275 finds new home.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive

Pages: 1 | 2 | >> (show all)
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
A nice Rigby .275 finds new home.
      #289701 - 01/11/16 05:51 PM

Never thought I'd ever own one of these!

Being enamoured with Jeffery sporters, I had begun taking out my frustration at the lack of opportunity to acquire a good .275 stalker by building a faithful copy.
A close friend has a couple of lovely examples of Jeffery's Mauser sporters, so I had acquired a correctly-profiled 7mm barrel, and a VZ24 action to kick the project off.

That all went out the window when another friend decided to move his Rigby along, to free up funds (...and space in the gunsafe!) for further acquisitions.

So in due course the little Rigby headed north.

Here's a few pics to add to the archive.
Hope you like the rifle, I know I do!



It has the flattened bolt-handle option, similar to that of the famous Bell/Ruark/Selby rifle.
The stock-wood is pretty nice for a Rigby .275: many I have seen have less figure than the average chair-leg.
Also the pistol-grip stock is a bonus as my personal preference excludes the oft-encountered bag-grip.




This particular rifle was built on a 1908 Oberndorf action, and probably left the Sackville Street premises in 1911.
I have yet to research the original owner.




Apologies for the rubbish pics of the barrel engraving, hard to photograph well.
It was sighted for the High Velocity load, 140gr pointed bullet.

Rigby's patent detachable scope mounts were present, however only the front one remains.
Unfortunately the action has been drilled and tapped for American-style scope bases, and the rear bridge has a few other holes as well (!).
My intention is to make and permanently attach a faithfully-profiled rear square-bridge to completely cover the damage.
The attachment will have the correct square hole for 'proper' detachable scope mounting at some future date.



This little stalking rifle has obviously led a busy life, and it will get little respite in my employ.
Luckily the previous owners have looked after the metal and bore condition is far better than I had a right to expect.
Bright and shiny with sharp rifling and very little wear so no issues expected in the hunting field.
A block of cartridges for load development with 140gr flat-base Sierras is ready and waiting for the next fine afternoon.
I'm sure she won't disappoint!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1652
Loc: Australia
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #289702 - 01/11/16 06:07 PM

Beautiful wood! Nice pick up, Marrakai!

--------------------
.


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: A nice Rigby .275 finds new home. [Re: Ash]
      #289704 - 01/11/16 07:02 PM

Marrakai!
Lucky bugger!
Good find mate - happy hunting with it
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
PatagonHunter
.300 member


Reged: 20/01/06
Posts: 249
Loc: Bariloche, Patagonia Argentina
Re: A nice Rigby .275 finds new home. [Re: 93x64mm]
      #289705 - 01/11/16 08:46 PM

Hello Marrakai,

Beautiful!!! What stories to tell by the rifle...
Well done!

PH


Post Extras: Print Post   Remind Me!   Notify Moderator  
lonewulf
.300 member


Reged: 06/08/12
Posts: 227
Loc: South-East Otago, New Zealand
Re: A nice Rigby .275 finds new home. [Re: PatagonHunter]
      #289706 - 01/11/16 09:22 PM



That little Rigby of yours is exactly what a proper little stalking rifle should look like.

What a beautiful thing. Good on you. I hope you have a fab time with it. I'm envious as hell.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: A nice Rigby .275 finds new home. [Re: lonewulf]
      #289707 - 01/11/16 09:33 PM

Marrakai, lovely rifle with a beautiful bit of wood. Don't let the screw holes put you off, it can all be worked around one way or another. Very nice little stalking rifle in a great cartridge. Hornady currently make brass with the 275 Rigby head stamp, which would fit nicely with your new purchase.

Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Iowa_303s
.400 member


Reged: 22/03/13
Posts: 1014
Loc: Iowa, USA
Re: A nice Rigby .275 finds new home. [Re: Waidmannsheil]
      #289712 - 01/11/16 11:50 PM

Great acquisition!
An honestly used and well cared for classic.
Congrats

--------------------
Matt

formerly known as Iowa_303

"Once your reputation is ruined you can live your life quite freely."

"Enkelkinder über alles"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: A nice Rigby .275 finds new home. [Re: Iowa_303s]
      #289718 - 02/11/16 04:15 AM

NICE!

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: A nice Rigby .275 finds new home. [Re: DarylS]
      #289722 - 02/11/16 07:02 AM

G'Day Fella's,

Mmmmmmmmmmmmmmmmmmm Donuts!

Doh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: A nice Rigby .275 finds new home. [Re: Homer]
      #289730 - 02/11/16 11:24 AM

Thanks for your kind comments gentlemen.
...and for the info on correctly headstamped Hornady brass Waidmannsheil. Will definitely get some of those! Currently using S&B and they don't inspire...

Since this is an archive, I attempted better photos of the barrel engraving, with limited success. Definitely need a better camera!




...and the one line of 'non-British' text we still like to see on these delightful British stalking rifles:



Still haven't gotten to the range yet, waterfowl season is in full swing and my mates would rather we fed the mozzies at the local goose swamp than bang away over a chronograph.
Maybe this weekend...

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
Huvius
.416 member


Reged: 04/11/07
Posts: 3518
Loc: Colorado
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #289734 - 02/11/16 12:10 PM

I am inclined to think that the other holes in your rear bridge are for the original Rigby mount such as on this rifle:
http://jamesdjulia.com/item/2277-369/

It is really a simple base as it has just a square hole in it to accept the square hook on the rear ring. These are tilt back to remove and the front mount is where it locks down - which you already have of course.

Lovely gun. I also prefer the full pistol grip stocking which seems to be rare on the .275s.

--------------------
He who lives in the past is doomed to enjoy it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: A nice Rigby .275 finds new home. [Re: Huvius]
      #289743 - 02/11/16 12:53 PM

Huvius:
Thanks for the link: I hadn't seen that one. Much appreciated.
I have been collecting web-pics of these mounts since taking delivery of the .275, and that is the first of a good half-dozen that is clearly a post-manufacture added rear mount (by Rigby no doubt). All the others I have seen appear to have been manufactured as single square bridge actions from scratch.

The fact that Rigby also appear to have added such a mount to a standard Mauser 98 action is very encouraging!

Forum member jcorry has posted photos of a lovely .350 Magnum with the rear square-bridge recessed for the detachable mount. Click HERE to view the thread with photos.
Unfortunately jcorry hasn't posted since early 2014.

Pjaln has one too I believe, maybe a 400/350, and I have sent a PM requesting dimensions, with fingers crossed!
Meanwhile, if anyone else here has such a rifle (or won Lot 2277 at the JJ auction!) I would love to get accurate measurements for the length, width and depth of the square hole, and internal angles of the mating surfaces.

A pic (and dimensions) for the scope-ring foot would be mighty helpful as well!

Thanks all

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
Gen_Hicks
.300 member


Reged: 15/10/12
Posts: 136
Loc: Lowveld, South Africa
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #289745 - 02/11/16 02:07 PM

Marrakai

Active member Paradox ( also from your end of the woods) has a Rigby with such a rear base. I am sure he will be delighted to help.

Best regards and congtratz wi your find


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: A nice Rigby .275 finds new home. [Re: Gen_Hicks]
      #290621 - 21/11/16 12:39 PM

Got busy again, field-work etc, but finally got to shoot the Rigby on the weekend.

After a 'warming' shot into the dirt bank, the first 3-shot group at 50 metres off the bench, open express sights, was a cloverleaf!



Working up with AR2208 (Varget) left me pondering, velocity was a good 150fps slower than that published on the ADI webpage for a 140gr bullet atop the loads I tested. Will have to try AR2209 next. All good fun!

Rigby's were quick to send the provenance: the rifle left their shop in January 1911 in the hands of a Major E.S.D.Goldsmith. The only likely candidate I have identified so far seems a bit early, 104th Bengal Fusiliers, Irish Regiment, so maybe it was a 'present to self' in retirement!

Will keep researching....

The details listed in the Rigby ledger are still correct today, length of pull to anti-recoil pad is still the same despite a recent Silver's replacement, and that magic word "Best" is there as well.
I was pleased to see the 'telescope' was fitted prior to the initial sale, but no details of the optics were recorded.
Interestingly, the rifle shares the weight (6lb 9oz) and barrel length (22 inches) of what was to become the No.3 pattern, presumably after the Kaiser's war, however this example was listed as a No.2 pattern (High Velocity model) at the time.

Should have some time to get back onto the scope-mount issue soon, will post anything of interest.

Thanks for your help all.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
264
.375 member


Reged: 15/02/11
Posts: 596
Loc: NT Australia
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #290622 - 21/11/16 01:02 PM

Very nice. Cheers Mick

Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.416 member


Reged: 05/07/09
Posts: 4896
Loc: Woodford Qld
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #290624 - 21/11/16 02:29 PM

Marrakai, that is a very good pick up and damn fine group. Modern rifles with a scope are pushed to match that. I like the old stalking rifle configuration, looks like a rifle should to me. I hope you take some game with it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
paradox_
.375 member


Reged: 12/05/07
Posts: 645
Loc: Australia
Re: A nice Rigby .275 finds new home. [Re: Rule303]
      #290627 - 21/11/16 04:38 PM

Congrats Tony...very nice

Best
Eric

--------------------
Walk softly and carry a big stick


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: A nice Rigby .275 finds new home. [Re: Rule303]
      #290628 - 21/11/16 05:56 PM

Quote:

Marrakai, that is a very good pick up and damn fine group. Modern rifles with a scope are pushed to match that. I like the old stalking rifle configuration, looks like a rifle should to me. I hope you take some game with it.




Agreed--what a great find on your part..congrats..

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: A nice Rigby .275 finds new home. [Re: Ripp]
      #290651 - 22/11/16 07:13 AM

Marraki
AR2209 worked best in my 7x57 with a 140 Nosler, has worked well on pigs & a deer to date.
Parker Hale M1100 - 22 inch barrel - Federal 210 primers & Remington/RWS brass
My most accurate load was at 50.5gn, start low & work up
AR2209
Gn 46 47 48 49 50 51
Vel 2432 2490 2525 2629 2674 2695

Great shooting by the way!
Cheers
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
MagnumHunter
.275 member


Reged: 06/07/04
Posts: 63
Loc: North Carolina, USA
Re: A nice Rigby .275 finds new home. [Re: 93x64mm]
      #290819 - 25/11/16 01:32 PM

Marrakai,
Congratulations on a wonderful find. I hope when you do investigate its past, the provenance is intriguing.
Would it be too much to ask to give me the measurement of the forend? Taken from the front guard screw to the end of the forend. I would like to duplicate its look on a project I am working on.
Thanks in advance.
Doug


Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: A nice Rigby .275 finds new home. [Re: MagnumHunter]
      #291307 - 02/12/16 10:50 PM

MagnumHunter:
Apologies, just realised I had forgotten to respond to your request.

Centre of front guard screw to forend tip is exactly 18cm, just over 7 inches. Hope this helps with your project.

93x64mm: have had AR2209 loads sitting there for over a week now (my time is not my own at the moment) but intend taking them to the range tomorrow. Will add results to this thread when they are to hand.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ahmed577
.333 member


Reged: 13/06/13
Posts: 326
Loc: Western Australia
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #291308 - 02/12/16 11:42 PM

Love a classic small bore. Went to the safe and pulled out a 333 Jeffrey takedown factory engraved and a holland & holland 250/3000 Kurtz action rifle to make my day. If some one in west Australia could visit me and teach me how to post a picture that would be great.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3475
Loc: Darwin, Top End of Australia
Re: A nice Rigby .275 finds new home. [Re: Ahmed577]
      #291362 - 04/12/16 01:37 AM

Shot the AR2209 loads at the range today, very happy with the results.
45 gr - 2495 fps
46 gr - 2580 fps
47 gr - 2640 fps
48 gr - 2700 fps
49 gr - 2760 fps

...a little faster than your loads, 93x64mm

The S&B case is close to 100% load density at 49 grains, but another half grain or so would probably fit and would push the velocity closer to the published 2800 fps 'factory' figure.

Scope mounts next!

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
Re: A nice Rigby .275 finds new home. [Re: Ahmed577]
      #291364 - 04/12/16 02:48 AM

Quote:

Love a classic small bore. Went to the safe and pulled out a 333 Jeffrey takedown factory engraved and a holland & holland 250/3000 Kurtz action rifle to make my day. If some one in west Australia could visit me and teach me how to post a picture that would be great.




Go to Photobucket..
http://s209.photobucket.com/

set up an account..hit "Upload" on the screen..drag the picture you want to post to the box..it will upload..click on the photo..click on the tab to copy..past it on the post here and boom..its there..

Ripp

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: A nice Rigby .275 finds new home. [Re: Marrakai]
      #291370 - 04/12/16 09:11 AM

Quote:

Shot the AR2209 loads at the range today, very happy with the results.
45 gr - 2495 fps
46 gr - 2580 fps
47 gr - 2640 fps
48 gr - 2700 fps
49 gr - 2760 fps

...a little faster than your loads, 93x64mm

The S&B case is close to 100% load density at 49 grains, but another half grain or so would probably fit and would push the velocity closer to the published 2800 fps 'factory' figure.

Scope mounts next!



Good to see you had a win mate!
Looks like yours could go a lot further than mine with velocities still going up in nice incremental steps, mine wasn't so by then even though I went higher!
50.5gn was the accuracy node for me, I only have a 22" barrel so my velocity will be down on yours.
140gn Noslers do well on smaller pigs & small Rusa!
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
0 registered and 13 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 13299

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved