Home | Ezine | Forums | Links | Contact
NitroExpress.com: To 'scope or not to 'scope & which mounts if I do ???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Pages: 1 | 2 | >> (show all)
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
To 'scope or not to 'scope & which mounts if I do ???
      #265388 - 22/05/15 04:51 PM

I have my Mannlicher Schoenauer M1903 Takedown and there are two decisions to make.
The rifle made in 1922 has never had a scope on it. As I didn't buy the rifle as an investment, but rather to hunt with, I'm inclined to 'scope it.

What would be the concensus on both questions?

Q1. First - Should I 'scope it now?

Q2. There are as far as I know only two mounts available to buy and fit, both made by EAW (Apel) in Germany.
190-00034 - a side mount fitting that allows removal of the scope from the rifle, doesn't hold zero when replaced. The sidemount obscures the Mfr. name 'Oestrr. Waffen.-Ges. Steyr' Pic. is not my rifle.


Pic. is not my rifle.

500-00034 is a swing off type mount that will hold zero but requires a front mount on top of the engraving at the front of the receiver together with a rear side mount. Doesn't obscure Mfr. engraving. Don't have an image of this version mount, but this is what the front mount would cover. Pic is my rifle.



If 'scoping the rifle which would be your choice?

Now I'm going to Italy on vacation for ten days, so will be 'out of touch'....catch up on any replies/views when I return.
Cheers, best wishes to all & thanks.

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
lancaster
.470 member


Reged: 06/05/08
Posts: 8730
Loc: There's a lighthouse in the mi...
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #265391 - 22/05/15 05:35 PM

EAW makes also three feet claw mounts but you have probably no gunmaker who is familar with this.
I make in such cases only claw mounts.
If I was you I would take the side mount and leave the receiver engraving untouched. it is now something that drop the price if the engraving is not readable anymore

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Edited by lancaster (22/05/15 05:36 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1344
Loc: Alaska
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: lancaster]
      #265396 - 22/05/15 06:23 PM

Because I'm old my eyes aren't great anymore. I would love to scope all my old rifles for this reason. But, I just can't do that to a great old rifle that is unmolested. I have compromised by getting bolt mounted peep sights mounted on spare cocking pieces. Keeping the original cocking piece safe for remount if needed. This allows the rifle to be put back to original condition with no permanent consequences.





The peep is barely visible on the 1913 Mauser.

Post Extras: Print Post   Remind Me!   Notify Moderator  
WWGreener
.224 member


Reged: 20/09/14
Posts: 24
Loc: Maryland, USA
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: casper50]
      #265413 - 23/05/15 01:12 AM

I too would choose a peep sight over both your scope mount choices. Peep sights are accurate and user friendly to old eyes. I put a Lyman 36 sight on my 1903. A bolt peep would be good too. They seem harder to find than the Lyman 36.

Who says side mounts won't hold zero? My 1952 M-S came with a Paul Jaeger side mount that returns to zero every time. I don't think gun makers would be wasting their time for nearly 100 years making and fitting detachable side mounts that are useless.

It's your gun. Do what you want. Maybe you could have bought one of the plentiful carbines that are already scoped.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2387
Loc: Melbourne Australia
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: WWGreener]
      #265422 - 23/05/15 07:36 AM

In my opinion a scope complements a rifle perfectly, especially one used for deer stalking. They enhance the overall appearance, nicely made and fitted rings and bases add to the beauty of the rifle. Continental Gun Makers fitted scopes to their rifles from very early on, especially on Mauser and Mannlicher rifles but also break action rifles. While fitting mounts to a Mannlicher is a little more difficult they are especially interesting, particularly with a nicely shaped rear ring to suit the offset mount. I have made several custom sets for Mannlicher rifles and they are a joy to use and look at, and if fitted properly return to zero perfectly. The front base can be fitted forward of the breech on the barrel and the rear base sits on the angled flat at the rear, so you will not cover any text or engraving. Recknagel make claw mount rings and bases to suit Mannlicher rifles.

My advice is to do it, you wont regret it, if done properly.


Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Marrakai
.416 member


Reged: 09/01/03
Posts: 3482
Loc: Darwin, Top End of Australia
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: Waidmannsheil]
      #265460 - 24/05/15 10:41 AM

deeangeo:
Here's another vote for what WWGreener said:
Quote:

..you could (buy) one of the plentiful carbines that are already scoped


Rather than vandalize that lovely unmolested example, sell it to a collector with young eyes and use the proceeds to acquire one of the many available examples already drilled and tapped.
If it were mine, however, I would choose the cocking-piece peep option.

--------------------
Marrakai
When the bull drops, the bullshit stops!
--------------------------------
www.marrakai-adventure.com.au

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: Marrakai]
      #265779 - 01/06/15 04:19 PM

Thank you all for your views on to scope or not. I appreciate your input. Here in the UK, 1903 stutzens/carbines are rarely seen advertised. I had one quite a few years ago and stupidly sold it. Had I found one at a price I could afford I'd have bought it, but this one turned up at a sensible price and I couldn't say 'No'.

I believe I will scope it having given quite some consideration to the matter - even though it does also have the MSch. peep sight fitted (Photo). I just need to take care how it's done.
Cheers, deeangeo



--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
kuduae
.400 member


Reged: 13/01/10
Posts: 1775
Loc: middle of Germany
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #265802 - 02/06/15 05:44 AM

Quote:

doesn't hold zero when replaced. The sidemount obscures the Mfr. name 'Oestrr. Waffen.-Ges. Steyr' Pic. is not my rifle.


Pic. is not my rifle.


BTW, it's my rifle and the Mount, if properly set up, holds Zero when replaced.
But I prefer claw mounts on Mannlicher-Schoenauers, but with the front base not on the receiver ring, but on a ring soldered around the barrel shank, like on my Magnum 6.5x68 and M1910 9.5x57 M-Sch.

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: kuduae]
      #265810 - 02/06/15 07:21 AM

Cheers Kuduae..I use the pic of your rifle to show my engineers the side fixing should I choose this method. Below is the response from EAW showing at item 1 what they say about this fixing.
As I have no experience of this sidemount I use their 'needs a control shot' statement and presume it to mean zero is interfered with should the scope be removed/replaced..



Thank you very much for the enquiry. We have two types of mounts for the rifle:

1) lateral slide-on mount with rings dia. 1"/26 mm, part number 190-00034:
It counts among the fixed mounts and requires a control shot any time has been taken off the rifle and put on again.
The base is fitted by screws laterally to one side of the action (drilling and tapping required).
Please see our web site: http://www.eaw.de/assets/files/2014/21_AM_seitl_M.pdf

2) pivot mount with lever with rings dia. 1"/26 mm, part number 500-00034:
It is a swing-off mount that ensures optimal repeatability of zero. A second scope or sight may also been fitted to the bases of the mount.
Front base and rear base are positioned by screws on top of the action (drilling and tapping required), and need to be secured by glue or soldering. Please see: http://www.eaw.de/assets/files/2014/11a_SM_HSM.pdf

Both mounts require a gunsmith who is familiar with these mounts.

As we do not, from the factory, sell to end users, we would suggest that you contact our sole agent for the UK and Ireland for any further information. It is: Sentry Trading, Paul Grannell, phone: 0044 1420 300 123, sales@st.uk.com

Nevertheless, we shall of course be glad to answer any technical query.

Best regards,

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
GG375
.333 member


Reged: 27/02/04
Posts: 347
Loc: Brisbane
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #266200 - 10/06/15 07:45 AM


I faced the same dilemma a couple of years ago. My 1903 had an old German scope on it which, although usable, was not ideal for my aging eyes. I decided if I was going to change to a modern scope it had to be done "right".

Here is the result -





I'm very happy with this set up. It did mount the scope a bit higher than the original but I just use a strap-on comb raiser and it's fine.

Cheers.

GG

Post Extras: Print Post   Remind Me!   Notify Moderator  
casper50
.400 member


Reged: 18/10/07
Posts: 1344
Loc: Alaska
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: GG375]
      #266220 - 10/06/15 04:11 PM

GG where did the mounts/rings come from?

Post Extras: Print Post   Remind Me!   Notify Moderator  
GG375
.333 member


Reged: 27/02/04
Posts: 347
Loc: Brisbane
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: casper50]
      #266224 - 10/06/15 04:47 PM


Casper30

They are a stock item from EAW. Need a fair amount of hand fitting tho.

Cheers.

GG

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: GG375]
      #266226 - 10/06/15 05:15 PM

Hi GG375, A very nice assembly with a really good scope!

Looks interesting but not an option EAW offered me when I asked them what bases/mounts/rings could be used. This looks like a fixed system on your rifle rather than a QD type. Do you have the model reference number & do they offer various objective ring sizes?
Any info greatly appreciated...

I was right on the cusp of ordereing the EAW mod: 500-00034 bases/rings although undecided whether I should have 26mm or 30mm ring fitting.
Cheers.

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Edited by deeangeo (10/06/15 05:17 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
GG375
.333 member


Reged: 27/02/04
Posts: 347
Loc: Brisbane
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #266235 - 10/06/15 09:20 PM

Hi deeangeo

The mount is a QD claw mount. To remove the scope you depress the button on the left hand side of the rear base and lift the rear of the scope up until the claws come free from their slots in the front base.

Sorry mate, my mistake. The mount is made by Recknagle (ERA). It is a bit of an involved process to order the parts. You have to go through their catalogue and pick the individual parts that make up the mount, in the sizes/diameters you require. I downloaded the catalogue, decided what I needed then got the ERA agent here in Australia to order them. Then you ship the lot off to a gunsmith experienced with the fitting of claw mounts.

I've had 2 of my Mannlichers fitted up and have the parts in the cupboard to do a third when I can afford it.

Happy to help further if you decide to go that way.

Cheers.

GG

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: GG375]
      #266273 - 11/06/15 07:40 AM

Thanks GG375.... I have started down the EAW route today and discovered similar in their catalogue. A 3 claw system.
I'm in touch with a German retailer who can ship to the UK.

If I fail with EAW I'll have to start on Recknagel...it's all quite a trawl through their pages though.

The front barrel ring has to be soldered the rear is not so complex.
I'm awaiting just a little more info from EAW, but they're very helpful as long as you know the correct questions to ask.

It's a 3-hooked claw mount for Mannlicher-Schoenauer rifles.
Front rings are available from dia 1"/26 mm to 80 mm for almost every bell size.
ATTENTION: this mount requires a lot of fitting labour!! Kind regards, Monja

The above is the initial reply ref a similar fitment to yours.
Cheers, deeangeo

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
GG375
.333 member


Reged: 27/02/04
Posts: 347
Loc: Brisbane
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #266293 - 11/06/15 08:18 PM


Sounds like a plan........let us know how it goes.

When I had my mounts fitted I asked my gunsmith to use one of the Loctite products to glue the front base/ring to the barrel to avoid having to re blue everything. Seems to be working ok so far!

Cheers.

GG

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: GG375]
      #266373 - 13/06/15 04:28 PM

Hey ho! - I appear to have failed with the EAW route and now have the details for the parts going the Zeigler/Recknagel combination.
Priced at around £400 for all the bits and what seems to be (I'm told by someone who knows) a total of 8-10 hours work, all should be completed.

GG375..I'm going to get one of our engineers to 'pin-solder' the front barrel ring base and am advised a 28mm dia. barrel ring is the one get, then take out around .006" for the exact fit to my barrel dia. That's the start point!

Backlock (offset) 53035-0000:
Ring for back lock incl. offset foot "in the white" 56000-3026:
Barrel base saddle for 28mm barrel 50000-0628: (Not shown)
Ziegler front ring for 56mm objective lens :
Ziegler front dovetail base moumt :



First though, I have to buy the scope to determine the exact objective bell ring size req'd.....so, first cash goes on a scope!
Hopefully a S&B 8x56/30mm tube as soon as I can find a good used one.
Cheers.

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #267657 - 09/07/15 04:17 PM

Well, I bought the scope, a used but very clean example. Externally it's unmarked and otics look just fine... I hope they work perfectly.. no reason to think not.
8x56 S&B/30mm tube & A4 reticule.

Now saving cash for the mounts !!

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #267803 - 12/07/15 06:38 AM

Quote:

Well, I bought the scope, a used but very clean example. Externally it's unmarked and otics look just fine... I hope they work perfectly.. no reason to think not.
8x56 S&B/30mm tube & A4 reticule.

Now saving cash for the mounts !!



And now I discover this type of mounting system will not work with the scope I bought....so now it's think again time!
Frustration!
Man alive I either have to sell the scope I just bought & get a different one or find some other mounting system. Man alive it's really difficult getting to find the right information.

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Igorrock
.400 member


Reged: 01/03/07
Posts: 1641
Loc: Finland
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #267847 - 12/07/15 02:44 PM

Quote:

And now I discover this type of mounting system will not work with the scope I bought


Can you explain more detailed why not ?

--------------------
http://promaakari.wordpress.com/

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: Igorrock]
      #267854 - 12/07/15 03:47 PM

I wanted to preserve all the engraving detail on the action of my rifle..i.e. on top at the front & the manufacturer on the side, so prefer not to fit a claw mount located at the top front of action. Same goes for the sidemount, which also requires some cut-away of the stock in order to fit.
The answer appeared to be by way of a barrel ring soldered in front of the action...:
But taking the exact measurement of the S&B scope and distance between the angles of eyepiece & objective lens..

1. The tube is not long enough to reach the distance so I cannot use 30mm rings
2. The Objective lens angle is too long so an objective lens ring cannot be used either.

So unless some form of reverse direction mount is available I cannot fit 30mm rings to the tube
and if I locate an objective ring at the front (rearmost point of objective lens), the eye relief is completely wrong.

The only alternative is to do exactly what I don't want to do - to fit a claw mount at the top of the action front - over the engraved Mannlicher Schonauer and Model number engraving.
Unless someone out there knows different.
Cheers, deeangeo

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #269956 - 03/09/15 03:53 PM

Well, the rifle has been away at the gunsmith for over a month and I don't have a timescale when it will be done....but, probably not in time for the stags this season!

By the time all the barrel furniture has been removed and replaced, rings/mounts fitted, re-proofing at Birmingham proof house and then polished ready for re-blueing/blacking and the scope (Schmidt und Bender 8x56 - 30mm tube) finally set into the rings, I'll be luck to see it before Christmas (not sure which year).

Hey ho..all in good time I guess ... I'm hoping it will be a great hunting rifle once again, but with great assistance for my ageing eyes.

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
karamoja
.275 member


Reged: 25/04/12
Posts: 83
Loc: Herefordshire, GB
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #269974 - 04/09/15 04:27 AM

You must be like a child at Christmas waiting! Post pictures when you get it back.I will look forward to seeing it!
Regards Karamoja

Edited by karamoja (04/09/15 04:29 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: karamoja]
      #272826 - 07/11/15 09:40 PM

It looks like I'm fully committed now!

I bought the scope mounting parts following good advice from a dealer not too far from me and it all looks as though it will work just fine, also the parts to ensure all fits well are not very different from the initial thinking.

So, the scope to go on my little beauty is a Schmidt & Bender 8x56 Klassik, 30mm tube, with the part numbers as listed below in case anyone should be thinking to do the same with a similar rifle, this is what will work and the scope will be mounted to give the lowest possible viewing height.

Front dovetail half saddle mount (in the white & requires blueing/blacking) located in front of the rear iron sight - Recknagel 50000-0617
Front dovetail claw mount fits into the half saddle mount - Ziegler Z238ZG0301
Front Objective scope ring - Ziegler Z075ZA0562

Rear locking base mount (in the white & requires blueing/blacking) - Recknagel 53035-0000
Rear scope ring with extended base Recknagel 56000-3026 - this requires milling to correct height and fitment into base mount (also in the white & requires blueing/blacking)

The total cost of these parts in the UK has been just short of £400 and are only available in the UK via the manufacturers main importers. So I dealt directly with the importer and not through a high street retail dealership.

Now begins the work of fitting these components to the rifle and when done, getting the parts that require blueing, blued properly. The total cost of getting this work done is going to be just about £1,000 GBP. But I am looking forward to the completed result which should be by Christmas or very early 2016.

Meantime it's more waiting until I can see how this wonderful piece of kit shoots.
Best wishes.

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39247
Loc: Barossa Valley, South Australi...
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #272885 - 08/11/15 08:17 PM

Good luck with it.

I would have looked for a different rifle in Austria or Germany, especially if I lived in Europe/UK. Probably cost less than the modifications alone.

I bought and ex-mil Mannlicher and planned to customise it. Decided it would be easier and cheaper to have an original bought second hand. Haven't done it yet though.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: NitroX]
      #273496 - 18/11/15 05:15 AM

The thing is the difficulty in finding a proper gunsmith that really knows what he's about with these older rifles. Trying to mount modern scopes on them just isn't quite as straightforward as you'd imagine.
Even attempting to understand the mount/rings catalogues from EAW Apel & Recknagel I found to be a challenge. A damn good engineer would be fine as long as one knows exactly what to explain in terms of fitting the ironwork to the barrel/receiver but more especially lining up and machining the rear ring mount leg so the scope alignment is bob on gives a man a good headache.

Most older mounting systems that may accept a scope with a 1" tube are simply set too high so in my case, getting the objective lens close down to the barrel and mounting as low as possible has been the priority.

Hopefully all will be achieved and I'll enjoy a brilliant rifle scoped so that my aging eyes can view the quarry comfortably.
ATB

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: NitroX]
      #279828 - 25/03/16 11:08 PM

Well here it is all done.

My 1922 6.5x54 Mannlicher Schoenauer M1903 'Takedown' with it's 8x56 Schmidt & Bender with 30mm tube ready to go.

A brilliant job with exactly the right parts & set as low as it can go to allow minimum barrel clearance and the wing safety to operate.

















The exact info for this job is as follows:
So, the scope to go on my little beauty is a Schmidt & Bender 8x56 Klassik, 30mm tube, with the part numbers as listed below in case anyone should be thinking to do the same with a similar rifle, this is what will work and the scope will be mounted to give the lowest possible viewing height.

Front dovetail half saddle mount (in the white & requires blueing/blacking) located in front of the rear iron sight - Recknagel 50000-0617
Front dovetail claw mount fits into the half saddle mount - Ziegler Z238ZG0301
Front Objective scope ring - Ziegler Z075ZA0562

Rear locking base mount (in the white & requires blueing/blacking) - Recknagel 53035-0000
Rear scope ring with extended base Recknagel 56000-3026 - this requires milling to correct height and fitment into base mount (also in the white & requires blueing/blacking)

The total cost of these parts in the UK has been just short of £400 and are only available in the UK via the manufacturers main importers.
The work was done by an engineer at my place of work under my instruction/direction and then all the metal parts sent away for blueing/reblacking. The reason for doing this was after the polishing and cleaning to solder the front base to the barrel, it all looks rather messy and requires a near complete re-finishing. Looks great now though.

Finally, the end result is - I got the exact scope I wanted onto this lovely rifle while also preserving ALL the original manufacturers engraving work untouched. Magic!

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #280229 - 03/04/16 05:41 PM

I think the rear offset base mount and ring is almost identical to the one GG375 used on his M1903. & a few more pics...

I can't find a way to correct the first pic to a horizontal image. However if you save the file and view out of the forum the pic will rotate.












Edited by deeangeo (03/04/16 05:55 PM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
MRobinson
.275 member


Reged: 29/01/06
Posts: 66
Loc: New England
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #283603 - 08/06/16 03:53 AM

Not what I would have done, but congratulations on getting yours set up the way you want it, which is really all that matters.

The build quality seems excellent.

I hope she shoots well.

--------------------
Mike

Post Extras: Print Post   Remind Me!   Notify Moderator  
Iowa_303s
.400 member


Reged: 22/03/13
Posts: 1014
Loc: Iowa, USA
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: MRobinson]
      #283630 - 08/06/16 12:49 PM

Nicely done! I wish mine was as nice as yours.
Mine has a side mount that is drilled and tapped into the left side wall.
Oh well, I got mine at a good price and I love it!

--------------------
Matt

formerly known as Iowa_303

"Once your reputation is ruined you can live your life quite freely."

"Enkelkinder über alles"

Post Extras: Print Post   Remind Me!   Notify Moderator  
lonewulf
.300 member


Reged: 06/08/12
Posts: 227
Loc: South-East Otago, New Zealand
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: Iowa_303s]
      #283635 - 08/06/16 07:36 PM



Handsome looking rifle that's for sure. Lot of hard work but well worth it by the looks of things. Don't forget to post some groups after you get it out to the range.

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: lonewulf]
      #283785 - 12/06/16 09:09 PM

I am well satisfied with the scope and mounts. They work well. I can also use the open or peep sight if I want. There's no interference of view from the front claw mount at all.

At present, groups are nothing special to write about...using the 160gn Hornady RN Interlock, they're coming in at around 1 1/4" - 1 1/2" MOA with the first two loads I tested.
Good enough for me to take three feral billy goats at 75yds. They dropped like stones.

Next to try is find out whether backing off propellant charge gives an improvement with that bullet. I don't really want to adjust seating depth as the bullet is 'roll' crimped into the cannelure.

Also on the list is the 140gn Hornady SST. This round I know doesn't load or feed as smoothly from mag to chamber, but it's passable. I haven't actually fired any of these rounds yet as I was waiting for Lee to supply a custom made Factory Crimp Die...that's now arrived & I crimped the rounds yesterday.

Incidentally, the guys at Lee Inc. were very helpful and turned around the custom die within the eight weeks they quoted for supply. The only problem I had was mailing an inert round to them. Royal Mail wouldn't touch the item. Fortunately, A good friend in the USA was on vacation in the UK and carried the round in his hold baggage and mailed it when he got back to the USA.
Lee returned the inert round to me along with the new die.....and Royal Mail handled the return!!! funny that!

We shall see what happens! - Hopefully, next weekend.
Cheers, deeangeo

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #283815 - 13/06/16 07:16 PM

I suggest you might try getting an exact measurement of the barrel's bore and groove diameter, either by slugging the bore or making a cast. In my experience, factory rifles in 6.5X54 M/S tend to run .268" in the bore, rather than the more usual 6.5mm diameter of .264". Hornady makes .268" bullets for use in the Mannlicher Carcano rifle, and you may be able to locate some in the UK.

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: xausa]
      #283840 - 14/06/16 03:54 AM

Quote:

I suggest you might try getting an exact measurement of the barrel's bore and groove diameter, either by slugging the bore or making a cast. In my experience, factory rifles in 6.5X54 M/S tend to run .268" in the bore, rather than the more usual 6.5mm diameter of .264". Hornady makes .268" bullets for use in the Mannlicher Carcano rifle, and you may be able to locate some in the UK.



Certainly something to check as soon as my gunsmith returns. I think slugging the bore is the easiest to do, but he can make the decision. We shall see what the result is in due course.

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 26513
Loc: Beautiful British Columbia, Ca...
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #283854 - 14/06/16 10:38 AM

If loading the larger .268" bullets, make sure they are not overly tight in the chamber anb that the ctg. case can release them without them being pinched tightly.
If you fire a regular full power load, then shove a .268" bullet into the just fired case and it fits with a tiny bit of slack (.001" or more)- perfect, you can use the larger bullets as long as your brass does not get thicker.
If it is a bit tight, you can outside neck turn the cases to make them fit properly.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras: Print Post   Remind Me!   Notify Moderator  
deeangeo
.300 member


Reged: 09/05/15
Posts: 207
Loc: United Kingdom
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: DarylS]
      #283863 - 14/06/16 03:33 PM

Thanks for that info Daryl.
Just to check - when you say 'outside neck turn', is this because the larger bullet dia. when inserted to case neck, may push out the dia. of the case neck, therefore be tight/not possible to chamber?
Cheers, d

--------------------
Blaser K95 Luxus Kipplaufbüchse, .25-06 Rem. Schmidt & Bender 8x56 & Nosler 110gn Accubond = Game Over!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Brithunter
.300 member


Reged: 17/03/10
Posts: 184
Loc: Lincolnshire, England
Re: To 'scope or not to 'scope & which mounts if I do ??? [Re: deeangeo]
      #283889 - 15/06/16 01:06 AM

If you check original Swedish Mausers in 6.5mm you will likely find 0.268" dia grooves and a nice 0.256" bore! As yet I have been unable to find out where this "rule" that rifling grooves are only 0.004" deep has come from. Both of the Steyr made Mannlichers in 6.5mm had 0.268" grooves and 0.256" bores as well that is a pre 1924 Schoenneur and a Mdl 1892.

--------------------
Don't let the bastards grind you down!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)


Previous topic Previous   View all topics Index   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 37 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 18321

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved