Home | Ezine | Forums | Links | Contact
NitroExpress.com: Old ZKK602 converted to 404 Jeffery

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1 | 2 | 3 | >> (show all)
DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Old ZKK602 converted to 404 Jeffery [Re: DaggaBoyBlog]
      #223948 - 20/01/13 04:00 AM

Those rifles are quite special boys. My first 602 was purchased early in 1973 - January, it was and had a lovely piece of walnut for it's wood. Like the DORLEAC rifle, it-too was chambered in .358 Norma Mag., just like the top rifle.

About mid 1974, I re-barreled it with a .375H&H BRNO barrel that came off a new '602' unfired, that was barreled up and altered to .505 Barnes Supreme. The .375 H&H BRNO barrel screwed onto my action and headspaced perfectly. How about that luck, sights straight up and aligned! I used it with cast bullets as my first 100 yard 3-position rifle, with the little pop-up peep - I made Marksman with it - then built a real position rifle. The early ZKK602's were quite special.

Both barrels went with it when I sold it to a fellow over on Vancouver Island for his deer and black bear shooting. Along with it went a couple hundred 270gr. Power Points, brass, dies, etc. His friends & hunting buddies all laughed at him with "That Cannon", until he started dumping deer and bear on the spot, no tracking, and was able, as Elmer used to say, "you can eat right down to the hole".

I saw him again a couple years later and attempted to buy it back from him. He laughed and said he could hardly sell it to me as he's turned down every one of his friends - they all wanted it too.

They are Special! That DORLEAC rifle runs to SPECTACULAR in my eyes!!

Thanks.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Even
.300 member


Reged: 28/12/12
Posts: 175
Loc: Canada
Re: Old ZKK602 converted to 404 Jeffery [Re: DaggaBoyBlog]
      #223967 - 20/01/13 03:20 PM

That is pretty much perfect, M. Dorleac! I've been debating what rifle to eventually build a .404 on, and I think you just answered my question.

Post Extras: Print Post   Remind Me!   Notify Moderator  
pondoro62
.224 member


Reged: 15/12/12
Posts: 44
Loc: Norway
Re: Old ZKK602 converted to 404 Jeffery [Re: DaggaBoyBlog]
      #224319 - 26/01/13 09:16 AM

Magnificent.....this rifle has now inspired me to restock and "Rigbyrize" my own ZKK 602...

Post Extras: Print Post   Remind Me!   Notify Moderator  
chuckT
.275 member


Reged: 11/07/11
Posts: 71
Loc: texas usa
Re: Old ZKK602 converted to 404 Jeffery [Re: pondoro62]
      #224375 - 27/01/13 12:43 PM

Fantastic job. The only thing that would make it better would be if the bolt was on the other side and it was tucked away in my safe. chuck.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Cinghiale
.333 member


Reged: 15/04/08
Posts: 406
Loc: Northern Territory
Re: Old ZKK602 converted to 404 Jeffery [Re: chuckT]
      #237682 - 10/11/13 07:10 PM

Fantastic rifle there for sure! Been away a long time from here and to come back and find this one is spectacular thanks for sharing.

Regards,

Mog


Post Extras: Print Post   Remind Me!   Notify Moderator  
gwh
.333 member


Reged: 28/01/08
Posts: 277
Loc: Cairns Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: DaggaBoyBlog]
      #237694 - 11/11/13 10:47 AM

Very very nice

--------------------
Hunt hard, shoot straight

"I speak of Africa and golden joys; the joy of wandering through lonely lands; the joy of hunting the mighty and terrible lords of the wilderness, the cunning, the wary and the grim"

Theodore Roosevelt, Khartoum, 1910


Post Extras: Print Post   Remind Me!   Notify Moderator  
ozhunter
.400 member


Reged: 18/08/04
Posts: 1692
Loc: Sydney, Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: gwh]
      #237746 - 12/11/13 08:49 PM

It is very pleasing to hear the Peter Hambrush does great work in you opinion as I need his expertise in double rifles soon.
Nice rifle as usual.


Post Extras: Print Post   Remind Me!   Notify Moderator  
ozhunter
.400 member


Reged: 18/08/04
Posts: 1692
Loc: Sydney, Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: Homer]
      #237747 - 12/11/13 09:00 PM

Quote:

G'Day Fella's,
As Sarg mentions,the spread of that Cape Buff is huge!
It's bosses aren't in the same league, so I assume it is a young animal?

Doh!
Homer




A youngish animal but with length like that you rarely get growth in the bosses.


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: DaggaBoyBlog]
      #246349 - 24/04/14 05:43 PM

Dorleac,
I know this is an old thread, but I hope you can help us not so talented folks out.
With the 98 Mauser you can completely disassemble the whole bolt assembly, with the ZKK & CZ 550 series you could get down to basic sections.
What I'm trying to work out is there some conversion that we can do / buy of the shelf so to speak of to fully field strip a CZ 550 down completely like a Mauser?
I have a CZ 550 in .404J, nothing flash like this one that's for sure!
I much prefer the bolt shroud of the ZKK's to the new CZ types as the new ones are overly bulky (just my opinion here folks).
Ed LaPour in the US has something similar I believe, would this then accomplish what I am trying to do or am I assuming too much?
I'm hoping that some of our US members may be able to help me out, surely I'm not the only bloke to try & ask this question?
Cheers
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
Deutsche_Vortrekker
.333 member


Reged: 27/04/08
Posts: 449
Loc: From the Kalahari to the USA
Re: Old ZKK602 converted to 404 Jeffery [Re: 93x64mm]
      #246350 - 24/04/14 07:26 PM

I like the older ZKK BRNO Rifles .And what a fine job was done on the 404 Jeffery , many thanks for posting. I recently restored a 7x57 with the old pop up peep ;shown on Nitro (which my Czech friend Denny sells on gunbroker if you have an older Brno where one was removed)I currently have the 7x57 and a .375 I don't know if and when I will get back to Afrika but they will both be going along when I go.

Edited by Deutsche_Vortrekker (24/04/14 07:53 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
DORLEAC
.333 member


Reged: 22/01/12
Posts: 464
Loc: Perpignan, France
Re: Old ZKK602 converted to 404 Jeffery [Re: 93x64mm]
      #246353 - 24/04/14 09:20 PM

On the 550 you can also replace the shroud and side safety by an Ed La Pour side swing conversion.
Ed products are of very hight quality and work fine.
Putting the safety lever in the middle position allows the dismantling of the firing pin assy in the same manner as on the Winchester 70.

Best.

DORLEAC
www.dorleac-dorleac.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
GG375
.333 member


Reged: 27/02/04
Posts: 347
Loc: Brisbane
Re: Old ZKK602 converted to 404 Jeffery [Re: DORLEAC]
      #246410 - 25/04/14 08:03 AM


93x64

Here is a pic of my CZ actioned .416R. I replaced the hideous factory shroud with the 3 pos safety shown. From memory it was a Precise Metalsmithing (PME) one.

Cheers mate.

GG


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ash
.400 member


Reged: 10/05/11
Posts: 1652
Loc: Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: GG375]
      #246418 - 25/04/14 08:49 AM

GG375 - You've made that look exceptional! Doesnt look as chunky as a normal CZ550 (in the stock etc).

Any chance of a full rifle picture?

--------------------
.


Post Extras: Print Post   Remind Me!   Notify Moderator  
GG375
.333 member


Reged: 27/02/04
Posts: 347
Loc: Brisbane
Re: Old ZKK602 converted to 404 Jeffery [Re: Ash]
      #246438 - 25/04/14 12:36 PM

Ash

How's this? Sing out if you need any other shots, close ups etc.

Cheers mate.

GG


Post Extras: Print Post   Remind Me!   Notify Moderator  
93x64mm
.416 member


Reged: 07/12/11
Posts: 3954
Loc: Nth QLD Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: GG375]
      #246442 - 25/04/14 01:49 PM

DORLEAC & GG375
Thanks for the info.
I've sent a email to Ed Lapour & see what comes of it.
Any drawings or notes on this will be most helpful - shame CZ don't bring them out that way!
Cheers
93x64mm


Post Extras: Print Post   Remind Me!   Notify Moderator  
Nick_Adams
.300 member


Reged: 20/12/03
Posts: 148
Loc: USA
Re: Old ZKK602 converted to 404 Jeffery [Re: 93x64mm]
      #246551 - 27/04/14 10:45 PM

Okay, I'll add my .375 H&H BRNO ZKK 602 to this exercise.



It's an early 1990s model, no pop-up peep sight, although one certainly would've been nice because I've been an aperture-sight shooter since about age 8.

My 602 is a semi-custom, in the sense that after shooting it for a while "as is," I shipped it to Lon Paul @ Tanglewood Custom for what (back then - mid-'90s) he called his "BRNO conversion," essentially an upgrade to the handling and esthetics of the rifle, i.e., shortening the barrel, straighting the bolt handle, re-working the "hog-back" stock and adding cross-bolts, doing trigger & action work (honing & polishing), installing a 3-position saftey, Pachmyr decelerator, fiber optic red frt. sight, barrel band swivel, etc.

Scope is a Nikon 1.5-4.5x in Talley rings.



A great rifle, a classic cartridge.



No interest in re-chambering my BRNO for a larger cartridge ...

I've got an AHR 550 DGR in .404 Jeff for situations where the need for something bigger is indicated.





Edited by Nick_Adams (27/04/14 10:48 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Deutsche_Vortrekker
.333 member


Reged: 27/04/08
Posts: 449
Loc: From the Kalahari to the USA
Re: Old ZKK602 converted to 404 Jeffery [Re: Nick_Adams]
      #246552 - 27/04/14 11:56 PM

Quite correct when stated that this is what the CZ should look like . I liked the bolt shroud set up of the Brno ZKK series ;the bolt handle would have been preferable to this one but was livable .Unfortunately when Brno moved to the new CZ factory they chose to install that hideous bolt shroud on the new CZ 550 series rifles. The firing pin setup remains the same (I actually have installed a CZ firing pin in a ZKK Brno but as the new CZ pin is hidden in that most hideous new bolt shroud when installed in a Brno shroud it sticks out unfinished in the rear of the ZKK shroud .I threaded the pin and installed a finished knurled cap to complete the job


Edited by Deutsche_Vortrekker (28/04/14 12:05 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Old ZKK602 converted to 404 Jeffery [Re: GG375]
      #298055 - 29/03/17 07:06 AM

Quote:

Ash

How's this? Sing out if you need any other shots, close ups etc.

Cheers mate.

GG





God lord, what a nice rifle.
I would give years of my life for something similar.

Who made that stock?

I'm about to make a new stock for my own 602. So I'm interested in some more info please?

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
Homer
.416 member


Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: Rino]
      #298059 - 29/03/17 08:13 AM

Mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm Donuts!

Doh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Claydog
.375 member


Reged: 17/08/12
Posts: 934
Loc: Katherine, Northern Territory ...
Re: Old ZKK602 converted to 404 Jeffery [Re: Homer]
      #298064 - 29/03/17 09:12 AM

That is a sweet rifle. Really nice lines on the stock.

Post Extras: Print Post   Remind Me!   Notify Moderator  
xausa
.400 member


Reged: 07/03/07
Posts: 2037
Loc: Tennessee, USA
Re: Old ZKK602 converted to 404 Jeffery [Re: Claydog]
      #298068 - 29/03/17 09:44 AM

Here is what Lon Paul was able to accomplish with my ZKK 602, bought in 1970 and converted to .500 Jeffrey:





Post Extras: Print Post   Remind Me!   Notify Moderator  
chuck375
.333 member


Reged: 13/10/07
Posts: 445
Loc: Colorado Springs CO
Re: Old ZKK602 converted to 404 Jeffery [Re: xausa]
      #299514 - 23/04/17 11:29 AM

Both beautiful custom rifles. I just have a box stock CZ 550 in 500 Jeffery (with some minor AHR mods, but I like it



--------------------
"There's a saying in prize fighting: Everyone's got a plan until they get hit"

Michael Douglas "The Ghost And The Darkness"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Waidmannsheil
.400 member


Reged: 19/04/13
Posts: 2363
Loc: Melbourne Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: chuck375]
      #299519 - 23/04/17 04:50 PM

Chuck, very niece piece of wood.

Waidmannsheil.

--------------------
There is nothing wrong with vegetarian food, so long as there is meat with it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rino
.300 member


Reged: 13/01/07
Posts: 101
Loc: Norway/South-Africa
Re: Old ZKK602 converted to 404 Jeffery [Re: DaggaBoyBlog]
      #302461 - 28/06/17 11:08 AM

Gentlemen, I'm working at a 602 as wee speak. But right now I'm kinda lost.
I have made a pattern for a new stock but I feel or think I'm kinda lost.
Please, is there any of you that feel for helping a lost soul?

--------------------
Alf Rino Hals


Post Extras: Print Post   Remind Me!   Notify Moderator  
PapaScarface
.224 member


Reged: 28/08/15
Posts: 40
Loc: NSW, Australia
Re: Old ZKK602 converted to 404 Jeffery [Re: Rino]
      #304639 - 31/08/17 07:06 PM

Beautiful rifle!

What is the rear 3 leaf sight? And where can I get a couple? Would beperfect for a few projects I have going.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | 3 | >> (show all)



Extra information
0 registered and 80 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 63263

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved