Home | Ezine | Forums | Links | Contact
NitroExpress.com: Is the 7mm Rem Mag slow and never achieved predictions?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1 | 2 | (show all)
DarylS
.700 member


Reged: 10/08/05
Posts: 26510
Loc: Beautiful British Columbia, Ca...
Re: Is the 7mm Rem Mag slow and never achieved predictions? [Re: chuck375]
      #376806 - 18/05/23 12:50 PM

7MM mag, with factory ammo usually did 2,860fps with 175's. They've changed the data now on factory ammo boxes, I think.
A .280 Ack/IMP will do that with a 26" bl.

I have a friend who "got" 3,050fps with 150gr. Sierra's in his factory 24" Belgium Browning .270. He shot quite a few moose with that rifle, including an Alaskan moose (in Spatzizi park, B.C.) It was huge & all his Cessna 185 could do to pack it out. Good thing Laslui Lake is a long one. He shot the moose in the low ground along the creek on the west end of the lake.
In exactly 700rounds the normally sub-MOA accuracy climbed to 1 1/2". I checked it out and it had 1 1/2" of throat erosion.
I re-barreled it with a PacNor 26" barrel, and he still gets just over 3,000fps with it, but with the max. load of H4831 instead of the same amount of IMR4831.
Yes- stiff bolt lift with the IMR load, every time. He thought that was normal and did not know there was a difference in those powders. Nuff said.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)



Extra information
0 registered and 76 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4373

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved