Home | Ezine | Forums | Links | Contact
NitroExpress.com: Since you all are fond of drivel...

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Pages: 1 | 2 | (show all)
DarylS
.700 member


Reged: 10/08/05
Posts: 27036
Loc: Beautiful British Columbia, Ca...
Re: Since you all are fond of drivel... [Re: NitroX]
      #372980 - 09/01/23 04:23 AM

Quote:

Daryl, .303 and I are expressing sarcasm. Meaning the opposite of what is said.

I'm sure when the .300 Winchester Magnum was the "Creedmoor" of the day, it was said the .30-06 was obsolete and dead. Yet today I would guess more .30-06s would be sold than.300 Win Mags?

I expect one-day the same for the other current 100% unmentionable manbun cartridge ...




I was somewhat inebriated when I wrote that.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39928
Loc: Barossa Valley, South Australi...
Re: Since you all are fond of drivel... [Re: DarylS]
      #373004 - 10/01/23 04:09 PM

BTW I'm not knocking the .300 Win Mag. But I'd prefer the. 300 H&H Mag myself.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
yamoon
.275 member


Reged: 19/06/22
Posts: 93
Loc: Kansas USA
Re: Since you all are fond of drivel... [Re: sharps4590]
      #373086 - 13/01/23 05:42 AM

Got to have something to fill the pages, between the articles proclaiming the latest and greatest plastic pistol.

--------------------
Mike


Post Extras: Print Post   Remind Me!   Notify Moderator  
Rule303
.450 member


Reged: 05/07/09
Posts: 5077
Loc: Woodford Qld
Re: Since you all are fond of drivel... [Re: yamoon]
      #373110 - 13/01/23 02:41 PM

Quote:

Got to have something to fill the pages, between the articles proclaiming the latest and greatest plastic pistol.




Yep. Shame these magazines do not reprint some of the good articles from years gone by. Like the letter Jack Weaver wrote to one of the mags explaining how the Weaver stance came about and exactly what it was. Every article I have read about his stance is wrong going by Jack. Just an example of what the magazines could do better in my view.


Post Extras: Print Post   Remind Me!   Notify Moderator  
458Win
.333 member


Reged: 15/12/06
Posts: 340
Loc: Alaska
Re: Since you all are fond of drivel... [Re: sharps4590]
      #373111 - 13/01/23 04:02 PM

There needs to be someone willing to write an article comparing old gunwriters Vrs modern ones

--------------------
Anyone who claims the 30-06 is ineffective has either never used one - or else is unwittingly commenting on their marksmanship
Phil Shoemaker
www.grizzlyskinsofalaska.com


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39928
Loc: Barossa Valley, South Australi...
Re: Since you all are fond of drivel... [Re: 458Win]
      #373114 - 13/01/23 06:10 PM

Quote:

There needs to be someone willing to write an article comparing old gunwriters Vrs modern ones




A problem with the internet, is volume and speed.

Short articles, quickly and poorly written, to fill space, to sell advertising. Not a monthly, quarterly or gGod forbid Annual printed magazine, but daily. On social media a page or group without several new posts a day dies quickly in the algorithms.

The writer's need to pump out dozens of articles a month.

Short articles also don't examine a subject well and thoroughly.

Photos and images. Instead of taking hundreds, even thousands of ones own original material. Sorting, editing, culling. Making the photos tell a story along with the print, just stick any crap as illustrations. Steak someone else's hard work.

Sames as news media. Poorly quickly written. Without research and real fact checking. Has to be out quickly. As it's on the net, just edit it galore as time ticks over. Sometimes the end result is completely different from the first edition ..

Film. DVDs rarely made today. Seems to be shorter little films nowadays? For the internet. Can people still make real money making hunting films today? Unless one can sell to some paying channel?

Thankfully we still have books! So far.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jim_C
.300 member


Reged: 09/08/14
Posts: 174
Loc: USA
Re: Since you all are fond of drivel... [Re: NitroX]
      #373405 - 22/01/23 11:58 AM

I always wondered about .318s in a .323 bore. A while back I got a good deal on some Woodleigh 200 gr RNSN .318s and some 196 RNSN .323 so I decided to test it.

Since I didn't have a lot of bullets, I took some shortcuts. I used new brass, went straight to near-max loads with IMR 4350 (about 2,500 fps), and only shot 5 shot groups. I sandbagged the rifles on the bench, and fired a shot every couple minutes to let the barrels cool a bit. Test guns were a K98k with iron sights, and a Remington 700 Classic (old Weaver T6 scope).

The K98k averaged about 2" with either bullet at 100 yards, the groups overlapped about 60%. The Remington 700 gave me separate groups, around 1" for the .323s and around 1.125" for the .318s.

I'd hunt with either of them in my 8x57.


Post Extras: Print Post   Remind Me!   Notify Moderator  
NitroXAdministrator
.700 member


Reged: 25/12/02
Posts: 39928
Loc: Barossa Valley, South Australi...
Re: Since you all are fond of drivel... [Re: Jim_C]
      #373418 - 23/01/23 05:08 AM

Quote:

I always wondered about .318s in a .323 bore. A while back I got a good deal on some Woodleigh 200 gr RNSN .318s and some 196 RNSN .323 so I decided to test it.

Since I didn't have a lot of bullets, I took some shortcuts. I used new brass, went straight to near-max loads with IMR 4350 (about 2,500 fps), and only shot 5 shot groups. I sandbagged the rifles on the bench, and fired a shot every couple minutes to let the barrels cool a bit. Test guns were a K98k with iron sights, and a Remington 700 Classic (old Weaver T6 scope).

The K98k averaged about 2" with either bullet at 100 yards, the groups overlapped about 60%. The Remington 700 gave me separate groups, around 1" for the .323s and around 1.125" for the .318s.

I'd hunt with either of them in my 8x57.




Interesting. Thanks.

A military advantage might be the ability to use older ammo in the new rifles. Logistics is always a big ammo issue.

--------------------
John aka NitroX

...
Govt get out of our lives NOW!
"I love the smell of cordite in the morning."
"A Sharp spear needs no polish"


Post Extras: Print Post   Remind Me!   Notify Moderator  
DarylS
.700 member


Reged: 10/08/05
Posts: 27036
Loc: Beautiful British Columbia, Ca...
Re: Since you all are fond of drivel... [Re: Jim_C]
      #373427 - 23/01/23 05:47 AM

Quote:

I always wondered about .318s in a .323 bore. A while back I got a good deal on some Woodleigh 200 gr RNSN .318s and some 196 RNSN .323 so I decided to test it.

Since I didn't have a lot of bullets, I took some shortcuts. I used new brass, went straight to near-max loads with IMR 4350 (about 2,500 fps), and only shot 5 shot groups. I sandbagged the rifles on the bench, and fired a shot every couple minutes to let the barrels cool a bit. Test guns were a K98k with iron sights, and a Remington 700 Classic (old Weaver T6 scope).

The K98k averaged about 2" with either bullet at 100 yards, the groups overlapped about 60%. The Remington 700 gave me separate groups, around 1" for the .323s and around 1.125" for the .318s.

I'd hunt with either of them in my 8x57.




The 9.3x57 Husky I had, had a normal bore diameter of .358", but had .370" groove diameter.
I used .365" normal 9.3's in it as well as sized down .375's to .367" in 235gr.Speer SRN and 300gr.Hornady RN's.
All bullets, whether 232" Norma, 270gr. Speer, 293gr. TUG's, or the sized down .375's all went into individual groups of 1" to 1 1/2" at 100 meters, spread over approximately 2" of vertical space on the target, with the 235gr. and .232gr. being the highest striking & 300's being the lowest.
Currently, the ammo for that rifle is loaded with 286gr. Norma Alaskan RN's at 2,200fps.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)



Extra information
1 registered and 16 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 7489

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved