Home | Ezine | Forums | Links | Contact
NitroExpress.com: ? on obtaining a usable unset pull w M-S double set triggers

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous topic Previous   Search Results   Next topic Next   Threaded Mode Threaded  

Pages: 1
BrittanyMan
.224 member


Reged: 31/05/16
Posts: 7
Loc: Midwest USA
? on obtaining a usable unset pull w M-S double set triggers
      #286555 - 17/08/16 01:21 PM

First let me say that I am enjoying getting to know my first Mannlicher-Schoenauer, a 1952 carbine in .270 WCF w/ Jaeger detachable sidemount & Lyman Alaskan scope & I've fitted another Jaeger slide & medium height rings w/ a contemporary Leupold 2 x 7 scope to the original base.

After spending the spring & summer shooting it on the range I'm very impressed with the accuracy (100 yd. 3 shot groups 1" & under with 130, 150 & 160 grain bullets) & most importantly, the gun holds it's zero. Very good performance for light carbine w/ good handling qualities made in 1953 & not far off the performance I get from a couple of custom rifles using pre 64 Winchester M70 actions that are heavier.

My only issue is the unset trigger pull of >8 lbs. (my trigger pull scale only goes to 8 lbs.)

I've got a wonderful set pull @ 12 ounces & I would most likely use the set mode for most hunting situations but I would like to have the option of using the trigger unset if need be & for me that means a trigger pull of no more than 4 lbs. I can live with the long take up inherent with unset double triggers but I can't deal with the heavy pull. I'll add the caveat that with the low mounted Leupold scope in place I cannot use the wing safety & must depend on the trigger blocking side safety so adequate sear engagement to prevent accidental discharge is very important.

At this point I've done nothing more than look at a schematic of the M-S double set trigger system & I would like to hear from any forum members experienced with the M-S (or other) double set trigger system on what realistic expectations are on safely lightening the unset trigger pull & how to accomplish it.

2 days & no response & I note that in the gunsmithing forum someone has asked a similar question re. obtaining a lighter unset pull on BRNO double set triggers w/o a response either.

Let me rephrase the question. Does anybody know if a reasonably light unset pull can be obtained or does the geometry of the trigger levers dictate a very heavy unset pull? My only past experience has been with percussion rifle double set triggers & I don't remember many having unset pulls as heavy as on my 1952 M/S.

Edited by BrittanyMan (19/08/16 05:47 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
JDL
.300 member


Reged: 25/12/10
Posts: 247
Loc: Louisiana
Re: ? on obtaining a usable unset pull w M-S double set triggers [Re: BrittanyMan]
      #289794 - 03/11/16 09:39 AM

I feel your pain with the unset trigger. If you find a solution, please post the cure.

Post Extras: Print Post   Remind Me!   Notify Moderator  
ChrisPer
.300 member


Reged: 12/05/08
Posts: 235
Loc: Australia
Re: ? on obtaining a usable unset pull w M-S double set triggers [Re: JDL]
      #290037 - 10/11/16 01:27 AM

I don't know if it was worked on, but my 1910 has a very reasonable pull around 4 lbs. It has no rear set trigger, ie that part has been removed not an original single trigger.


If anyone has the parts to replace it please let me know!

Post Extras: Print Post   Remind Me!   Notify Moderator  
Louis
.375 member


Reged: 13/05/15
Posts: 977
Loc: France
Re: ? on obtaining a usable unset pull w M-S double set triggers [Re: ChrisPer]
      #290042 - 10/11/16 03:46 AM

BrittanyMan. Please send me your email address by PM and I will forward you the diagram of a MS trigger; this is a document I cannot post on the forum as I cannot attach it. Best regards. Louis

--------------------
"Everything that doesn't kill me makes me stronger"

Post Extras: Print Post   Remind Me!   Notify Moderator  
BrittanyMan
.224 member


Reged: 31/05/16
Posts: 7
Loc: Midwest USA
Re: ? on obtaining a usable unset pull w M-S double set triggers [Re: Louis]
      #290164 - 12/11/16 04:45 AM

Louis,

Thank you for your kind offer but I have schematics of the post war single & double set triggers. It looks to me like the heavy unset pull of the double set mechanism is a result of the trigger lever geometry & unless I hear something to the contrary from a reliable source I'm gong to leave well enough alone.

These days most of my hunting is done from a stand & for that the set trigger works just fine & I have no desire to convert to the singe trigger mechanism.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Previous topic Previous   Search Results   Next topic Next   Threaded Mode Threaded  

Extra information
0 registered and 12 anonymous users are browsing this forum.

Moderator:  CptCurl 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1957

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved