Home | Ezine | Forums | Links | Contact
NitroExpress.com: 375 H&H with 350 data from woodleigh

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
bonanza
.400 member


Reged: 17/05/04
Posts: 2335
Loc: South Carolina
375 H&H with 350 data from woodleigh
      #15944 - 18/06/04 11:26 PM

However, for your interest, here are some loads we worked up during testing of the 350 grain SN RN and PP.
350gr RN 68 grains H4350 Federal 215 primer 2300 fps
" " 70 grains " " " " 2345 fps
" " 72 grains " " " " 2363 fps
" " 74 grains " " " " 2375 fps

350 grain PP 72 grains H4350 Federal 215 primer 2380 fps
" " " 73 grains " " " " 2250 fps

H414 is similar burning rate to H4350, so your 70 grains load should give about 2345 fps.

Regards,
Geoff McDonald.
WOODLEIGH BULLETS


--------------------


"Speak Precisely" G. Gordon Liddy.

"Life is absurd, chaotic and we must define its purpose with our actions" Abert Camus

"I''m the dude playing a dude disguised as another dude."

"Yo! Mr. White"


Post Extras: Print Post   Remind Me!   Notify Moderator  
cowboyhat
.224 member


Reged: 31/05/04
Posts: 2
Loc: Indiana
Re: 375 H&H with 350 data from woodleigh [Re: bonanza]
      #16001 - 20/06/04 07:08 AM

Do you have any accuracy results to post? RJW

--------------------
RJW

It is not about being the fastest, and it is not even about being the most accurate....it is about being willing


Post Extras: Print Post   Remind Me!   Notify Moderator  
safari_hunter
.224 member


Reged: 26/02/04
Posts: 16
Loc: Melbourne, Australia
Re: 375 H&H with 350 data from woodleigh [Re: bonanza]
      #16016 - 20/06/04 04:57 PM

I'm just wandering, what is the equalevant of H4350 using ADI powders.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Con
.333 member


Reged: 24/05/04
Posts: 261
Loc: Victoria
Re: 375 H&H with 350 data from woodleigh [Re: safari_hunter]
      #16044 - 21/06/04 11:46 AM

Hodgdon's H4350 is AR2209.
Cheers...
Con


Post Extras: Print Post   Remind Me!   Notify Moderator  
atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: 375 H&H with 350 data from woodleigh [Re: Con]
      #16078 - 22/06/04 01:59 AM

I used 66 grs. of RL-15 and the absolutly fantastic Woodleigh 350 gr. RN and PPs on buffalo last year in Tanzania, along with the 450 gr. 416 Rem and they are the hammer of Thor on buff..

The PP will penitrate a bit better than the RN but the RN opens up to a larger cross section, I prefer the PP I think...

I believe I was the first to test these bullets on Cape Buffalo...They mushroom perfectly every time..I have shot 9 Buffalo with these bullets and I feel the 350 gr. bullet puts the old 375 in the 416 class, and the 450 gr. 416 rates right up there with the 458 Lott or close enough for goverment work ..

Now if I can just get Geoff to make a flat nose solid, we'll be in the pound seats with the lighter calibers.


Post Extras: Print Post   Remind Me!   Notify Moderator  
bonanza
.400 member


Reged: 17/05/04
Posts: 2335
Loc: South Carolina
Re: 375 H&H with 350 data from woodleigh [Re: atkinson6]
      #16085 - 22/06/04 03:49 AM

Can you comment on the pressure and/velocity for the 375 with 350 grainers?

--------------------


"Speak Precisely" G. Gordon Liddy.

"Life is absurd, chaotic and we must define its purpose with our actions" Abert Camus

"I''m the dude playing a dude disguised as another dude."

"Yo! Mr. White"


Post Extras: Print Post   Remind Me!   Notify Moderator  
BFaucett
.333 member


Reged: 13/01/04
Posts: 451
Loc: Houston, Texas
Re: 375 H&H with 350 data from woodleigh [Re: bonanza]
      #16095 - 22/06/04 10:38 AM

I posted this over on AR but I wanted to post it here also.

Load data from the Barnes Bullets - Reloading Manual Number One (Copyright 1992) for the .375 H&H Mag using the 350gr Barnes Original bullet. This is a lead core bullet; NOT an "X" bullet. It's similar in construction to the Woodleigh. While the Barnes Original is not the same bullet as the Woodleigh, of course, it should be possible to at least use this data as a guideline.



Note: I do not know what kind of pressure testing Barnes did for Manual Number One. It's not stated in the manual. Under the notes for the .375 H&H, the manual states: "When shooting for this manual, we used Barnes brass, Federal 215 primers and a 26 inch barrel." Usual caveats apply about starting below max and working up.

-Bob F.


Post Extras: Print Post   Remind Me!   Notify Moderator  
bonanza
.400 member


Reged: 17/05/04
Posts: 2335
Loc: South Carolina
Re: 375 H&H with 350 data from woodleigh [Re: BFaucett]
      #16101 - 22/06/04 12:40 PM

Is there a difference in H4350 and IMR 4350?

--------------------


"Speak Precisely" G. Gordon Liddy.

"Life is absurd, chaotic and we must define its purpose with our actions" Abert Camus

"I''m the dude playing a dude disguised as another dude."

"Yo! Mr. White"


Post Extras: Print Post   Remind Me!   Notify Moderator  
**DONOTDELETE**





Re: 375 H&H with 350 data from woodleigh [Re: bonanza]
      #16107 - 22/06/04 09:33 PM

Bonanza,

IMR4350 is slightly faster than H4350. The difference amounts to about a 0.75% - 1% lower charge weight of IMR4350 than H4350.

Scott



Post Extras: Print Post   Remind Me!   Notify Moderator  
bonanza
.400 member


Reged: 17/05/04
Posts: 2335
Loc: South Carolina
Re: 375 H&H with 350 data from woodleigh [Re: ScottS]
      #16109 - 22/06/04 11:12 PM

Thanks,

I have a can of both and want to use it before buying more.

B.

--------------------


"Speak Precisely" G. Gordon Liddy.

"Life is absurd, chaotic and we must define its purpose with our actions" Abert Camus

"I''m the dude playing a dude disguised as another dude."

"Yo! Mr. White"


Post Extras: Print Post   Remind Me!   Notify Moderator  
atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: 375 H&H with 350 data from woodleigh [Re: bonanza]
      #16356 - 30/06/04 02:26 PM

I have tried all these loads with the 350 gr. Woodleigh and the new Rhino bullets which is longer than the woodleighs, and found most of them to be severely compacted...

I finally came to the conclusion that H4895 is the best powder to use as it is only lightly compacted and it gets excellent velocity, the highest so far, but I have more work to do with it...

It matters little from the bench, but on safari I do not want compacted powder...


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 480 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 5860

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved