Wayne59
|
(.400 member)
|
15/11/19 01:41 PM
|
|
|
|
|
smokeless muzzleloader
|
|
Just finished this yesterday. Shoots a 275gr bullet at 3000 fps or a 300gr bullet at around 2800 fps. Here are a couple of pic's. Click to enlarge.
|
tinker
|
(.416 member)
|
15/11/19 02:49 PM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Info please
What is it? Which action? What is the stock? What is the load, and the loading protocol?
|
Wayne59
|
(.400 member)
|
15/11/19 11:34 PM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Tinker it is a hybrid cross between a Remmington and a Savage. The action is a 700 Rem and the barrel threads up like a Savage. The stock is a Boyd's AT1 heavily modified to work. You can use several different powders. I am using IMR4198. I just started using it yesterday and started with 60grs 4198 and a Hornady jacketed bullet weighing 300 grs. It loads like any inline muzzle loader except you have to size the bullets so they will run down the bore. I forgot to mention the recoil (or maby I shouldn't). The gun uses a moduel that holds the primer.
|
tinker
|
(.416 member)
|
15/11/19 11:46 PM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Recoil - meh. I was running a 4 pound handgun last week with 61 grains 3031 and a 300 grain bullet.
What does it use for ignition? Is it nothing more than a 209 primer exactly like the inline black powder muzzle loading rifles? Can you show a photo of the primer module? Sounds interesting.
|
DarylS
|
(.700 member)
|
16/11/19 03:45 AM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Lrg Rifle Mag. primers, I think, tinker. Interesting concept.
|
Wayne59
|
(.400 member)
|
16/11/19 03:55 AM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Fed large rifle magnum primer.
|
tinker
|
(.416 member)
|
16/11/19 05:24 AM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Looks like Badger Ridge Industries and/or VariFlame, Hankins maybe..?
I wonder how long they hold up before gas cutting happens around the flash hole.
|
Wayne59
|
(.400 member)
|
16/11/19 07:13 AM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
No gas cutting the little protrusion swells to fit the inside of the cone in the breechplug. Their Hankins.
|
NitroX
|
(.700 member)
|
17/11/19 05:57 PM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
What calibre? .45?
|
Wayne59
|
(.400 member)
|
18/11/19 05:31 AM
|
|
|
|
|
Re: smokeless muzzleloader
|
|
Yes it is 45.
|