axis1008
(.224 member)
19/03/16 04:50 AM
Oberndorf Type S Brenneke 8x64 Custom

I know this is a rare one. Another Brenneke I have acquired from a family members estate. Value?
Opinions? Thanks in advance and my email is j_delmer@yahoo.com


mckinney
(.400 member)
19/03/16 07:27 AM
Re: Oberndorf Type S Brenneke 8x64 Custom

Beautiful Type S. I'll defer to Don S. and others, but I don't know if the 8x64 chambering is original. Rifle appears to be an Oberndorf Type S in 8x57 that was rebarreled by Brenneke. My understanding is that only a few original Mauser Type B sporters were made in 8x64. (There was one in the Holts auction yesterday, marked and apparently modified by the Swedish firm Widforss).

I'll be very interested to see what others have to say. It's certainly a valuable and interesting piece.


Huvius
(.416 member)
19/03/16 11:27 AM
Re: Oberndorf Type S Brenneke 8x64 Custom

Originally made in 1921.
I am thinking it has the original barrel which was rechambered from the regular 8X57 (8.0 N) to the 8X64 by Brenneke.
I could have began life as a TypeS. The bolt has been cut to clear a low mounted scope and the steel stock tip is not like a factory tip for a TypeM. The TypeS had no steel tip as far as I know.
What is the barrel length? It could have been cut back and the steel cap added at the time of the rework.
It certainly is special in that the bolt shroud has no provision for the standard Mauser bolt safety.
The Greener type safety is commonly called a Brenneke safety on Mausers. I have seen and had Mausers with Greener type safeties but they have all had the standard bolt safety as well. I have never seen a bolt shroud like this one has although it very well may be a Brenneke item.


dons
(.333 member)
19/03/16 11:39 AM
Re: Oberndorf Type S Brenneke 8x64 Custom

It started life as an 8x57 and was modified to 8x64 by Brenneke. The barrel is original to the rifle and appears to be a Type G full stock rifle with a 24" barrel rather than a Type S stutzen. There are several examples in Jon's Archive book.


Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved