| Waidmannsheil |
| (.400 member) |
| 10/07/16 07:17 PM |
9x56MS
|
Gentlemen, does anybody know what the actual bore and groove size of the Model 1905 in 9x56 MS is. Thanks in advance.
Waidmannsheil.
| Kano |
| (.300 member) |
| 10/07/16 11:00 PM |
|
|
Re: 9x56MS
|
CIP specs:
Link:
http://www.cip-bobp.org/homologation/uploads/tdcc/tab-i/tabical-en-page66.pdf
| Vladymere |
| (.300 member) |
| 15/07/16 03:47 AM |
|
Re: 9x56MS
|
Waidmannsheil,
MY 1905 MS barrel slugs out at .352" grooves and .343" lands. The neck I.D. of my fired brass measures .357".
I suspect though that if you slugged 10 different 1905 MS barrels that you would get 10 different set of measurements varying several thousandths.
Hope this helps.
Vlad