I'm sorry I do not, but you should see what your fired brass measures out at and see if you can obviate the need for full length sizing, especially if you own just one Cadet chambered rifle.
The heeled bullet requires just enough neck ID to seat so the FLS step may not be needed.
Even if the bullets aren't firmly secured in the case, if they stay put, that is often good enough.
Another alternative is to use a plier (a modified wire stripper is ideal) which can squeeze the neck just enough to crimp the bullet in place - after the bullet is seated of course.
That way, you don't even need anything other than a shell holder and punch to deprime and prime your cases and the plier to crimp the seated bullet.