| BwanaBob |
| (.300 member) |
| 15/07/21 06:09 PM |
458 Lott Cases Wanted
|
I am trying to find some .458 Lott cases but I cannot find them in any gunshop in Oz. Does anyone have any .458 Lott cases lying around that they don't need?
| 93x64mm |
| (.416 member) |
| 15/07/21 09:05 PM |
|
Re: 458 Lott Cases Wanted
|
Try this mate, they have stock!
I think they're Bertram Brass, it wouldn't worry me if they were one bit!
I have them in 577-450 Martini Henry, my batch is pretty consistent overall.
https://www.northernshooterssupplies.com.au/458-Lott-Unprimed-Brass-Cases-p/458l.htm
| Hunter4752001 |
| (.300 member) |
| 16/07/21 08:19 AM |
|
Re: 458 Lott Cases Wanted
|
If you can get some .375 H&H cases you could try blowing them out to 458 Lott. Make sure to anneal before each stage.
| Waidmannsheil |
| (.400 member) |
| 16/07/21 09:08 AM |
|
Re: 458 Lott Cases Wanted
|
Magnum Sports has Norma 458 Lott brass for sale at the moment.
Matt.
| DarylS |
| (.700 member) |
| 16/07/21 01:01 PM |
|
|
Re: 458 Lott Cases Wanted
|
Quote:
If you can get some .375 H&H cases you could try blowing them out to 458 Lott. Make sure to anneal before each stage.
Or - if new .375H&H brass, neck up to hold a .458 bullet and fireform. bingo-done - then anneal, trim to length if necessary to square up case mouth.
That is how I made .50 Alaskan cases - necked .348" brass to .50 - one pass, then seated a .50 cal. bullet and fireformed - done.