|
|
|||||||
I am looking for a BRNO ZKK 602. Either a complete rifle, incomplete rifle or just an action but it must be the earlier model with the Pop-up aperture. The aperture does not have to be complete, as I have a spare one. Alternatively, a CZ 550 Magnum that has been custom fitted with the pop-up aperture would also be acceptable. I am happy to go through the process of importing the rifle from anywhere in the world and I already have a US based export agent if that is necessary. |
||||||||
|
|
|||||||
Good luck with the BRNO - mine was a 1972 rifle - long gone after re-barreling it to .375H&H with a take-off 602 bl. |
||||||||
|
|
|||||||
Best of luck BwanaBob! They are like rocking horse sh!t....great find to get a spare one! CZ America custom shop supposedly does these http://www.czfirearms.us/index.php?topic=38029.0 Can't hurt mate & worth a try http://cz-usa.com/links/customize/ Cheers 93x64mm |
||||||||
|
|
|||||||
I know that the CZ USA custom shop was doing this work because I saw them at the Shot Show in Vegas several years ago plus I have a CZ550 in .416 Rigby that has been fitted with a pop-up aperture (however, this rifle is still in the USA and I am waiting for it to be shipped out). However, when I recently wrote to CZ USA and asked about this work the reply I got was that they don't do this work and have never done it!!!! So I am quite confused by that reply and my .416 Rigby is certainly evidence to the contrary on that reply! |
||||||||
|
|
|||||||
Quote: Must be like another European rifle maker who does not make custom barrels for their rifles to customer order, and yet there are rifles floating arounf the world with custom barrels per customer order. And their website also used to or still does mention it ... but they also have never done it ... Their standard barrel prices seem akin to custom barrel prices so I dread what a custom barrel would actually cost ... |
||||||||
|
|
|||||||
I FOUND ONE! Finally, after looking for years, I found a ZKK602 action, with the popup aperture intact, on Gunbroker so my ultimate .404 Jeffery project now has a starting point. Yahoo! |
||||||||
|
|
|||||||
Hi Bob, we’ll done, it will cost a bit to get that down to you Eh ? I hope to see if my 600 action is still here when I get out of the Bush ! Hope all is well with you & the family ! Oh remember I’m looking for a stock for mind if you see one about !! |
||||||||
|
|
|||||||
Yes, it will probably cost a bit to get it here but it was fairly cheap to start with so, by the time I land it in Oz, it will probably only cost me about the same as buying a ZKK602 (without the pop-up aperture) in Oz. Family is all well, thanks for asking. See you in Oz, sometime, or perhaps in Africa? And I am keeping my eyes open for a stock. Bob |
||||||||
|
|
|||||||
Quote: Will make a great project rifle Don't forget to get some build photos when you get it back here please! Cheers 93x64mm |