| sbs470 |
| (.333 member) |
| 28/08/15 06:53 AM |
loads for a four ten
|
Hi Guys
Has any one got a load for a four ten.The ADI book does not offer very much at all.
I have an Alfred Field (London) double,2 inch chambers .All of the components are here ready to go but no load data.
Thanks in advance
| 93x64mm |
| (.416 member) |
| 28/08/15 05:21 PM |
|
Re: loads for a four ten
|
SBS470,
try the site below, it may help?
http://www.hodgdonreloading.com/data/shotgun
H110 is the same as AR2205 if my memory serves me correctly?
This site has only 2 1/2" shells so the smaller 2" ones would most probably work at a lower pressure & lighter payload.
I didn't know you could get reloading gear for the old 410's!
Great pigeon gun & the best to start youngsters off with.
Seen one of these an old H&R Model 1900 bowl wallabies over at short range with no problem at all!
Will continue to look & if I find something more I'll post
best of luck mate
93x64mm
| Shackleton |
| (.300 member) |
| 26/04/16 11:28 AM |
|
Re: loads for a four ten
|
Would it work to use fire formed .303 British cases like people do for the .410 Enfield conversions? Of course, that doesn't address the lack of load data.
| Jim_C |
| (.300 member) |
| 26/04/16 12:38 PM |
|
Re: loads for a four ten
|
Take a look around over at Shotgunworld.com There should be some data in the "reloading" section of the forum.