Homer
(.416 member)
16/01/19 08:33 PM
CZ 550 rifles, are no more?

G'Day Fella's,

There has been a bit of a rush on CZ 550's (aka= Brno ZKK 602), in .375 H&H, .416, .458's, as apparently, CZ have stopped making them.
I'm not sure if this is completely correct and or if CZ have a replacement in the pipline?

If this is the end of the 550 magnum length action, well that will be a shame.

From what I have been told, part or all of the problem, may have been their Australian agents/distributors .....................

Double D'oh!!
Homer


Rule303
(.416 member)
16/01/19 09:03 PM
Re: CZ 550 rifles, are no more?

Be nice to know if this is true or just their agent, Winchester Australia, is not importing them anymore.

Ripp
(.577 member)
16/01/19 10:22 PM
Re: CZ 550 rifles, are no more?

Is this accurate???

93x64mm
(.416 member)
17/01/19 07:11 AM
Re: CZ 550 rifles, are no more?

CZ USA still has them?
https://cz-usa.com/product-category/rifles/safari/
Most typically our end. We can only hope NIOA becomes the agent, but only time will tell; at least they'll do a better job than Winchester - phone calls & emails are just ignored!


Ripp
(.577 member)
17/01/19 02:49 PM
Re: CZ 550 rifles, are no more?

Quote:

CZ USA still has them?
https://cz-usa.com/product-category/rifles/safari/
Most typically our end. We can only hope NIOA becomes the agent, but only time will tell; at least they'll do a better job than Winchester - phone calls & emails are just ignored!




AND in 505 Gibbs no less..


Rule303
(.416 member)
17/01/19 04:26 PM
Re: CZ 550 rifles, are no more?

Quote:

CZ USA still has them?
https://cz-usa.com/product-category/rifles/safari/
Most typically our end. We can only hope NIOA becomes the agent, but only time will tell; at least they'll do a better job than Winchester - phone calls & emails are just ignored!




This is what I think is the case.


Rule303
(.416 member)
19/01/19 07:16 AM
Re: CZ 550 rifles, are no more?

What I have found out from a gun dealer is the CZ550 magnums to be made in limited quantity's and the 550 up to 9.3 to be discontinued. Nothing official just talk in the trade.

NitroXAdministrator
(.700 member)
20/01/19 02:46 AM
Re: CZ 550 rifles, are no more?

One of the few modern made rifles and brands worth buying, today IMO. Other than makers in niche markets and smaller volume makers.

chuck375
(.333 member)
24/01/19 03:03 PM
Re: CZ 550 rifles, are no more?

That would be a shame. I know a lot of folks in the states favor Win Model 70s, but we have both and I have to say my CZ 550 in 500 Jeffery is so solid, no wiggle in the bolt and so accurate I like it more.



Waidmannsheil
(.400 member)
24/01/19 07:00 PM
Re: CZ 550 rifles, are no more?

Nice looking rifle, nice timber and the replacement bolt shroud makes all the difference,

Matt.


Ripp
(.577 member)
24/01/19 11:01 PM
Re: CZ 550 rifles, are no more?

Quote:

That would be a shame. I know a lot of folks in the states favor Win Model 70s, but we have both and I have to say my CZ 550 in 500 Jeffery is so solid, no wiggle in the bolt and so accurate I like it more.






Really nice looking rifle..guess if these are no longer going to be made I need to go shopping


chuck375
(.333 member)
28/01/19 11:16 AM
Re: CZ 550 rifles, are no more?

Thanks

tophet1
(.400 member)
28/01/19 01:28 PM
Re: CZ 550 rifles, are no more?

Quote:

G'Day Fella's,

There has been a bit of a rush on CZ 550's (aka= Brno ZKK 602), in .375 H&H, .416, .458's, as apparently, CZ have stopped making them.
I'm not sure if this is completely correct and or if CZ have a replacement in the pipline?

If this is the end of the 550 magnum length action, well that will be a shame.

From what I have been told, part or all of the problem, may have been their Australian agents/distributors .....................

Double D'oh!!
Homer




Source ?

Because this has come up before, again and again and it was only Winchester Australia and dealers pushing the new model.

I wish this would die a natural death rather than continue as a myth.


paradox_
(.375 member)
28/01/19 04:03 PM
Re: CZ 550 rifles, are no more?

Speaking of Winchester Australia.

Sorry , and al ittle off topic
The Price of Norma brass has gone up around near double in recent weeks. EG 100 6.5X54 went from $147/100 to $269/100, and not only ay my local gunshop......and over a whole range of cartridges.
Are WA having a lend of us??

Best
Eric


Ripp
(.577 member)
29/01/19 09:11 AM
Re: CZ 550 rifles, are no more?

Quote:

Quote:

G'Day Fella's,

There has been a bit of a rush on CZ 550's (aka= Brno ZKK 602), in .375 H&H, .416, .458's, as apparently, CZ have stopped making them.
I'm not sure if this is completely correct and or if CZ have a replacement in the pipline?

If this is the end of the 550 magnum length action, well that will be a shame.

From what I have been told, part or all of the problem, may have been their Australian agents/distributors .....................

Double D'oh!!
Homer




Source ?

Because this has come up before, again and again and it was only Winchester Australia and dealers pushing the new model.

I wish this would die a natural death rather than continue as a myth.




Everything I have found online is old--like 2013--the CZ 550Safari and the American Safari Magnum seem to alive and well the CZ USA site..


rscott
(.333 member)
27/03/19 11:20 AM
Re: CZ 550 rifles, are no more?

apparently discontinued the 'standard' calibers(3006, 270, 243, etc.) except special order in the Safari model configuration. Safari models still in production. from their website.
damn shame, nice Mauser action in an affordable package, hammer forge barrel, etc., etc. go figure the modern consumer.


Nick_Adams
(.300 member)
02/04/19 09:50 PM
Re: CZ 550 rifles, are no more?

Too many inexperienced hunters are just fine with PFs, as they have no appreciation of the history or benefits of a Mauser/CRF action.

That, and 99.9% of them hunt nothing larger than deer (at least in the U.S.), and even then much of that is done with a 12ga slug-gun or some flavor of lever-action.

Mauser-pattern/CRF rifles I have are a BRNO 602 ZKK, a CZ 550, and my grandfather's 'pre-war' Winchester Model 70.


Ripp
(.577 member)
03/04/19 12:38 AM
Re: CZ 550 rifles, are no more?

Quote:

Too many inexperienced hunters are just fine with PFs, as they have no appreciation of the history or benefits of a Mauser/CRF action.

That, and 99.9% of them hunt nothing larger than deer (at least in the U.S.), and even then much of that is done with a 12ga slug-gun or some flavor of lever-action.

Mauser-pattern/CRF rifles I have are a BRNO 602 ZKK, a CZ 550, and my grandfather's 'pre-war' Winchester Model 70.




I am THAT GUY...

Personally think the CRF action is way over rated and over stated.. I know, I know, blasphemy..especially on this site.. oh well..

Seriously, I have been on 6 hunts in Africa..used a PF Rem custom shop in .416 for all the hunts with the exception of one, I used a Sako model 75 in 375H&H... no issues..hunted cape buffalo, elephant, lion, croc, hippo, leopard and dozens of plains game..no issues..

Having said that, I have an acquaintance who is a very well known international hunter. His wife was almost killed by a cape buffalo using a CRF Winchester years ago while hunting in Zim..

My point is, they both work.. I have both..but like the Rem..I have a fairly expensive CRF custom in my gun safe..yet, if I was too leave tomorrow morning for a buff hunt I would still take the Rem..

I do like the CZ's... and would have no problem using one to build a nice custom --or a nice crf Winchester action.. personally I don't care of the mauser actions..never have..but, that's just me.. each to their own..if you like them, fine..use them..


Postman
(.375 member)
03/04/19 03:21 AM
Re: CZ 550 rifles, are no more?

PF vs CRF is a very tiresome debate. They both can work. They both can jam up and misfeed. I like CRF simply because it is more complex and it peaks my mechanical design interest and appreciation, (much like a Luger does for me) but to say it is a safety requirement to hunt DG is misleading.

The CZ Safari is a reasonable platform at a very reasonable price and it would be a shame if it were ever to be truly discontinued. It is on my “one day, I’ll buy one” list.

I have only hunted DG a couple of times now, with another hunt on the near horizon and every time, I primarily hunt with a double, but my spare rifle always defaults to my Sako Kodiak PF in .375 H&H. Sako likes to claim it’s model 85 is a CRF, but it sure looks like a PF to me. Point is, I have full confidence in it, I like it’s short barrel and fast handling, and it is utterly and completely reliable in my hands.


3DogMike
(.400 member)
03/04/19 03:42 AM
Re: CZ 550 rifles, are no more?

Quote:

Too many inexperienced hunters are just fine with PFs, as they have no appreciation of the history or benefits of a Mauser/CRF action.

That, and 99.9% of them hunt nothing larger than deer (at least in the U.S.), and even then much of that is done with a 12ga slug-gun or some flavor of lever-action.

Mauser-pattern/CRF rifles I have are a BRNO 602 ZKK, a CZ 550, and my grandfather's 'pre-war' Winchester Model 70.



Nick,
Ah the delicious irony: your nice looking Ruger No.1......is it not “push feed”?

- Mike



Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved