| 275 |
| (.224 member) |
| 06/03/04 04:30 AM |
.240 Apex Ammo/Components
|
Does anyone know where to get hold of the stuff?! Am wincing at having to pay £2.60 a shot to Holland's for nickel plated rounds, which I'm told are not overly good for rifle barrels... Thanks in advance!
Michael
| mbogo375 |
| (.275 member) |
| 08/03/04 07:28 AM |
|
|
Re: .240 Apex Ammo/Components
|
I don't know if it will help since you are not in the US, but Quality Cartridge has it listed (I don't know the price).
Quality Cartridge
Jim
| AfricanHunter |
| (.275 member) |
| 15/03/04 03:24 AM |
|
Re: .240 Apex Ammo/Components
|
I have around 200 new boxer primer, unprimed cases and no rifle any longer, maybe I can help you out.
Contact me at the email
Leroy
| Boghossian |
| (.275 member) |
| 21/03/04 07:27 AM |
|
Re: .240 Apex Ammo/Components
|
I assume you have a rifle in this caliber, a rare gun! Is the trajectory similar to the .243? I have seen a double barrelled .240 but I doubt the two barrels would shoot close enough at extended distances...
| AfricanHunter |
| (.275 member) |
| 28/03/04 12:49 AM |
|
Re: .240 Apex Ammo/Components
|
No longer have one. It'll beat .243. In fact the cass can be used for .240 Weatherby.
I alos had a .240 flanged H&H Royal that I had the ejectors modified to take the rimless case and turned the belts off of the . 240 belted to use in it. Worked fine.
Regards
| mickey |
| (.416 member) |
| 28/03/04 02:23 AM |
|
|
Re: .240 Apex Ammo/Components
|
In reply to:
I alos had a .240 flanged H&H Royal that I had the ejectors modified to take the rimless case and turned the belts off of the . 240 belted to use in it. Worked fine.
AAAAAAAAAAAAGGGGGGGGGGGHHHHHHHHH. Where's the icon for scream. I just had a stroke, my blood pressure is 400 over 300. You should be gilffished and stringhaleterd or whatever Ray says. 
I hope this was back before rimmed cases could be found. Wasn't there even any Kynoch to be had?
| AfricanHunter |
| (.275 member) |
| 06/04/04 11:00 AM |
|
Re: .240 Apex Ammo/Components
|
Yes, it was way before Bertram. Yes, I had some Kynoch, but not much. I also, had a set of RCBS dies to form and swage 9.3x74 into .240 flanged, but it was the greatest success. The .240's were the easy was out!