Huvius,
Thanks. I should receive the Farquharson and it does not have a firing pin.

I suspect a former owner removed it because the trigger needs to be recut and wanted to make sure there was not an accident with a "hair" trigger. The trigger will have to be sorted out before I shoot the gun unless I want to use the top safety as the trigger.

The firing hole in the block is 0.375" diameter.

If you have a firing pin, I would like to buy that from you.

Also if you have a firing pin (even with a broken tip) that I could borrow to copy, that would be greatly appreciated.

RRB1